Posted 27 July 2021 - 07:51
I have VU+ Zero 4K and the max vtuner count is 4 (2 or 4 is the default for many reveivers). How can I increase it to 8? I want to compile my own openpli image, but what settings do I need to edit in the source code?
I have 8 satip servers - as a quick fix I'm using minisatip as satip proxy with "virtual disqcq". But I want to connect directly 8 vtuner to 8 satip server (not at the same time offcourse)
Posted 27 July 2021 - 13:34
As far I know this is something we cannot do... as it is driver related....
WaveFrontier 28.2E | 23.5E | 19.2E | 16E | 13E | 10/9E | 7E | 5E | 1W | 4/5W | 15W
Posted 27 July 2021 - 14:25
Isn't it also limited to the amount of demuxers are available, so it may be hardware limited too?
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 29 July 2021 - 12:40
vtuner is a software tuner - why is it hardware limited?
Posted 29 July 2021 - 12:47
I know that Dreambox one has physically only 1 tuner inside but virtually 24 vtuner... How so?
Theoretically the only limit can be CPU/newtork. You can have n+1 vtuner but you can not use them all at the same time. How many you can use at the same time depends on the cpu and network speed.
When I compile new image, then also the drivers will be recompiled...? Or the drivers source code is closed?
Posted 29 July 2021 - 13:00
A tuner delivers an entire transponder, so you need a demuxer to get the required channel out of the stream. And those are implemented in the SoC, not in software.
And yes, driver source is closed, they are supplied by the manufacturer as .ko files.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 7 August 2021 - 17:26
Is there out any tuner where the source code is not closed and it is possible to edit vtuner count?
Posted 7 August 2021 - 18:14
I doubt it.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 7 August 2021 - 18:26
https://github.com/O...7da547432f436ba
You would then probably have to patch the kernel accordingly.
But you should know beforehand how the driver patches the kernel.
But if you want to test, then you just do it via try & error
Posted 7 August 2021 - 18:29
Don't you run out of demuxes when you add too many?
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 7 August 2021 - 18:55
mhh.
sure....
You would have to expand, but I thought it was more about the limitation on the part of the driver.
There are some receivers where virtual tuners are in principle possible, or more than specified.
Only the driver or the old kernel limits it.
Expanding tuners via USB would also always be conceivable.
But of course these are always gimmicks that have to be made by those who feel like doing it.
The fact that more than 4 virtual tuners are possible has been activated there.
So the question arises which image is on the box?
Actually, the zero4k should provide 8 virtual tuners with develop.
Is it also possible that I'm completely wrong?
Posted 9 August 2021 - 19:22
1) You need at least one hardware tuner for every frequency you want to receive from simultaneously.
2) You need at least as many demuxes as hardware tuners.
3) You can check how many demuxes you have by looking in "/dev/dvb/adapter0".
4) No idea what you mean "a software tuner". If you want to tune a frequency you need hardware.
Posted 9 August 2021 - 21:03
A vtuner is a virtual tuner, like one added by a satip client.
It behaves in all respects as a tuner physically present, hence my remark that you need a demuxer for it. Which means the number of vtuners is limited to the number of demuxes minus the number of installed and activated local tuners.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 9 August 2021 - 21:23
I think we all mean exactly the same thing 
I thought the solo4k with fbc has 8 dmuxers and should therefore potentially also be able to enable 8 virtual tuners.
If you also connect a USB tuner, there can be more.
Posted 9 August 2021 - 21:47
In the solo4K with internal DVB-S2X FBC and one double DVB-C NIM(TT3L10) I have a total of 15 demux from 0 to 14. Tuner goes from A to J so 10 tuners for 15 demux.
NO SUPPORT by PM, it is a forum make your question public so everybody can benefit from the question/answer.
If you think that my answer helps you, you can press the up arrow in bottom right of the answer.
Wanna help with OpenPLi Translation? Please read our Wiki Information for translators
Sat: Hotbird 13.0E, Astra 19.2E, Eutelsat5A 5.0W
VU+ Solo 4K: 2*DVB-S2 + 2*DVB-C/T/T2 (used in DVB-C) & Duo 4K: 2*DVB-S2X + DVB-C (FBC)
AB-Com: PULSe 4K 1*DVB-S2X (+ DVB-C/T/T2)
Edision OS Mio 4K: 1*DVB-S2X + 1*DVB-C/T/T2
Posted 9 August 2021 - 22:00
I think we all mean exactly the same thing
I thought the solo4k with fbc has 8 dmuxers and should therefore potentially also be able to enable 8 virtual tuners.f
If you also connect a USB tuner, there can be more.
It is a Zero, so 1 hardware tuner, not FBC. And you can't connect more USB tuners unless there are sufficient demuxes to support them.
Not sure what you guys mean by virtual tuner. Any time I have heard "virtual tuner" it refers to a USB.
If you have a sat-ip server for 8 clients, running that at maximum capacity will require 8 hardware tuners, (or one FBC tuner). There is no way to avoid this hardware limitation in software.
Edited by Huevos, 9 August 2021 - 22:02.
Posted 9 August 2021 - 22:33
yes, sorry sorrry sorrry....
solo4k zero4k ...my mistake
Posted 10 August 2021 - 01:17
If you have a sat-ip server for 8 clients, running that at maximum capacity will require 8 hardware tuners, (or one FBC tuner). There is no way to avoid this hardware limitation in software.
The vtuner is what is created on the client side, so for example with a sat-ip client. So a "virtual" tuner as opposed to a "real" tuner.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 10 August 2021 - 07:31
Ok, that makes sense.
Potential Bug with DVB-T2 Sat IP channel searchStarted by Casandro, 24 Mar 2024  satip, channel search, dvb-t2
|
|
|
||
Teletext bei VTuner (SAT>IP)Started by BGraunke, 14 Feb 2021 teletext, vtuner, satip, et-8500 and 1 more...
|
|
|
||
Sat>IP client tuner fehltStarted by Hoerbi1000, 1 Jul 2018 Satip, Tuner
|
|
|
||
Sat>ip client werkt niet?Started by erwinde, 22 May 2018 satip
|
|
|
||
SATIP Server wird nicht gefunden (Xsarius Fusion HD SE)Started by whans22, 20 May 2016 SATIP, Xsarius Fusion HD SE
|
|
|
0 members, 1 guests, 0 anonymous users
