398 replies to this topic

[dudule22]

I did a scan and a new EPGImport after (with the" clear EPG.dat" option enabled).

For all the scanned channels i have only EIT EPG.

[dudule22]

I did also a full sat scan and same result.

I supress EPGImport and reinstall it and same problem.

 

Info channel C+ : #SERVICE 1:0:19:2261:438:1:C0AEEC:0:0:0:

Something is wrong but What ?

[Pr2]

Check the source that you have selected in EPGImport.

Go into:

Menu - Parameters - System -

Scroll down to switch to the second screen and check that ignore the sub-network in the name space DVB-S is set to enable.

Turn on expert mode if you are not yet in it to see all possible entries.

Edited by Pr2, 12 September 2021 - 12:47.

[dudule22]

The name space DVB-S is disable,,only DVB-C is enabled.

 

Rytec sources are : France_TNT, France Wallonie _ commun, France Mixte, France sport-cinema.

 

Info channel C+ is #SERVICE 1:0:19:2261:438:1:C0AEEC:0:0:0:

[Pr2]

OK as I state you need to  set ignore the sub-network in the name space DVB-S to enable (your is disable) and then you won't have problem.

 

Here is the service reference that I have for Canal+ :  1:0:19:2261:438:1:C00000:0:0:0: (which is the one used in Rytec)

Edited by Pr2, 12 September 2021 - 14:15.

[dudule22]

With name space DVB-S enabled, it doesn't work, same result.

[dudule22]

I replace manualy in the file .tv for canal+ the value C0AEEC by C00000 and now it works fine for this channel and for all the scanned channels on 12012 V.

All the others scanned channels on 12012V have the C0AEEC value.

 

??

[dudule22]

Why is there the C0AEEC value after a scan and not C00000 value ?

[doglover]

This namespace is certainly the problem:

C0AEEC

Why some receivers scan this, is a mystery for me.

The subnetwerk setting could be the  problem.

 

Although I have tested this on my own receiver (mutant HD2400) and the result were all :C00000: in the namespace.

 

Where does it come from?

What receiver are you using and which image is on there?
 

[Pr2]

There is an option to ignore the sub network  in namespace for DVB-S and he disable it in its configuration (why I don't know). The default is to have it enable to fix this kind of problem.

So with this enable (default) we will just have the orbital position (C0 in hexa means 192 in base10 which mean 19.2°E) in the namespace so C0 0000  while he scan with this disable the sub network is set so it is:  C0 AEEC

[dudule22]

I use a DUO4K with the last release of openpli 8.1.

[dudule22]

If ignore name space DVB-S enabled and i do a new scan, i confirm that on all channels scanned the value is C00000.

 

Thanks for this information.

 

Regards

Edited by dudule22, 14 September 2021 - 19:42.

[shangi]

Hello, for the update of 462 packages of 14 September, it appears a warning message that it is better to flash again .... Is it necessary to flash the image again or do the update normally? If you upgrade normally, do you have to use the telnet command line to reinstall all the packages? Thank you in advance and congratulations to you

Edited by shangi, 15 September 2021 - 09:06.

[WanWizard]

For the moment, just do nothing, that update is incomplete. There is an updated build in the making.

[b0rg]

Hello,

 

I've come across a strange issue. I flashed OpenPLi into a Vu+ Zero v2 and name resolution does not work out of the box, with my router at least. When I set a 3rd party DNS like google, it works fine. This router has no issues with Windows10, Android, iOS and MacOS machines, only with this box.

 

Maybe its OS is issuing odd DNS requests that the router doesn't like? It's an ISP supplied Compal CH7465LG-LC modem. When flashing another image like OpenATV, the same box works fine. I did cat /etc/resolv.conf and it has the correct nameserver entry.

[WanWizard]

Never seen that before. We use the standard resolver from OE, like I assume OE-A images do too...

[b0rg]

OK, there is definitely something wrong with this router. It seems the only reason the rest of the devices work on the network is because name resolution works over the router's IPv6 DNS server. Since OpenPLi does not pick up IPv6 DNS by default, name resolution fails over IPv4.

[WanWizard]

If you use SLAAC for IPv6, the box needs rdnssd to pick up the IPv6 DNS being broadcasted, which isn't available at the moment.

[bloke76]

I have an issue when running timeshift and switching off the receiver.

If I am on catchup in the middle of a programme and turn off the receiver I am not able to turn on the receiver again.

I need to use the power switch on the backside for restart.

 

VU+ Duo 4K SE

8.1

[Dimitrij]

 

turn off

standby or?