1139 replies to this topic

[foxbob]

Good evening.There was such an error on webkit-hbbtv-ultimo4k.

2022-04-09 17:57:48+0300 [-] [browser] Starting HbbTV
2022-04-09 17:57:48+0300 [-] [Skin] Processing screen 'SimpleSummary' from list 'HbbTVWindow_summary, SimpleSummary', position=(0, 0), size=(800 x 480) for module 'SimpleSummary'.
2022-04-09 17:57:48+0300 [-] [Screen] Showing screen '['HbbTVWindow_summary', 'SimpleSummary']'.
2022-04-09 17:57:48+0300 [-] [Screen] Showing screen 'HbbTVWindow'.
2022-04-09 17:57:52+0300 [-] [browser] startswith first arg must be bytes or a tuple of bytes, not str
2022-04-09 17:57:52+0300 [-] [browser] VBSServerThread: can't concat str to bytes

[marto]

HDMI-CEC is not working correctly on Ultimo4K. Switching off the TV when you put the receiver in standby mode is working just once (first time). Afterwards, only the receiver is going to standby and TV remains ON. If you select "Set Fixed" in the HDMI-CEC menu, then the receiver will put the TV in standby, but again only once... With same settings in HDMI-CEC menu on OpenPLi8.1 and Nightly builds, there are no issues. Tried several times flashing the last two pyton3 releases with and without backup with same result.

[littlesat]

HDMI-CEC is a 'special' thing... it works when you're lucky and it also depends on deviations on the firmware from your receiver and/or TV.... when one of those do not speak the right HDMI-CED 'accent' unexpected things do happen... The big question? is it OpenPLi-related.... I think at least is should not be py3 related or do you experience it on the py3 image only?

[marto]

HDMI-CEC is a 'special' thing... it works when you're lucky and it also depends on deviations on the firmware from your receiver and/or TV.... when one of those do not speak the right HDMI-CED 'accent' unexpected things do happen... The big question? is it OpenPLi-related.... I think at least is should not be py3 related or do you experience it on the py3 image only?

I experience it on the python3 image only. As i said in my previous post, there is no issue on OpenPLi8.1 and Nightly builds with same equipment and settings.

[twol]

Hdmi-Cec  works as before in a python 3 image, but the code for both the hdmicec python module(s) and hdmicec C++ driver need modifications that are not in the current OpenPli python 3 image.

Edited by twol, 14 April 2022 - 17:57.

[JAKITAKI]

openpli-python3-ustym4kpro-20220414_multiboot

 

after updating the latest image, no functions of the remote control work

nothing can be done

[extrasmooth]

 

openpli-python3-ustym4kpro-20220414_multiboot

 

after updating the latest image, no functions of the remote control work

nothing can be done

 

I had exactly the same issue with the remote control not functioning on the openpli-python3-ustym4kpro-20220414_multiboot image

 

The web interface could be used to control the receiver but the remote control didn't function at all.

Only Hisi Front Panel Button Controls was shown in input devices with no reference to a remote control.

[rantanplan]

 

 

openpli-python3-ustym4kpro-20220414_multiboot

 

after updating the latest image, no functions of the remote control work

nothing can be done

 

I had exactly the same issue with the remote control not functioning on the openpli-python3-ustym4kpro-20220414_multiboot image

 

The web interface could be used to control the receiver but the remote control didn't function at all.

Only Hisi Front Panel Button Controls was shown in input devices with no reference to a remote control.

 

can you also test the develop image?
The driver has been updated with regard to RCU handling.
Obviously there is a problem
 

[extrasmooth]

 

 

 

openpli-python3-ustym4kpro-20220414_multiboot

 

after updating the latest image, no functions of the remote control work

nothing can be done

 

I had exactly the same issue with the remote control not functioning on the openpli-python3-ustym4kpro-20220414_multiboot image

 

The web interface could be used to control the receiver but the remote control didn't function at all.

Only Hisi Front Panel Button Controls was shown in input devices with no reference to a remote control.

 

can you also test the develop image?
The driver has been updated with regard to RCU handling.
Obviously there is a problem
 

 

I've flashed the develop image openpli-develop-ustym4kpro-20220415_multiboot.zip  which appears to have the same issue with the remote control not responding. 

The web interface can be used to control the receiver but the RCU doesn't function. 

The remote control works fine in the stable release openpli-8.1-release-ustym4kpro-20220410_multiboot.zip

[rantanplan]

Ok, then it's actually a bug in the new RCU driver.

https://github.com/z...520c85f6bb01e47

[babsy98]

you flash the recovery too ?, we have test 3 uclan rcu all working

 

old rcu

new rcu

and new premium rcu all ok

i test with openatv

[rantanplan]

Yes, the drivers work with OpenATV.
But here the drivers were changed again (hashtag chksum).
Feedback here is that the RCU is not working.
Maybe you can also briefly test the develop/py3 image pli from 1404.

It cannot have been a recovery that is described as the error already occurs in the setup wizard.

Edited by rantanplan, 16 April 2022 - 09:37.

[isteric2005]

just for info,

today i updated uclan 4k with openpli py3 test and the remote no longer works.

I have updated the development and the situation itself.

I rebooted to another openatv 7.0 slot and the remote works.

If possible check .....

Edited by isteric2005, 16 April 2022 - 18:28.

[Frenske]

I’m afraid that in the last Uclan update there was a change regarding the RC. A new one should have been added and not replaced. I’ll check later tomorrow if I have the time.

[40H3X]

Did a flash with 20220418 and it won't boot into the GUI

[WanWizard]

init 4 and start up from the commandline?

[rantanplan]

Did a flash with 20220418 and it won't boot into the GUI

py3 uclan

the new driver has been revert.
In addition, the gst libav was activated to test media handling.

[isteric2005]

 

Did a flash with 20220418 and it won't boot into the GUI

py3 uclan

the new driver has been revert.
In addition, the gst libav was activated to test media handling.

 

Is it possible to upgrade already?

With what telnet command?

[rantanplan]

py3 is experimental, so never upgrade, always flash again.

[40H3X]

When I choose py 3 multiboot from Multiboot image selector (GUI), lets say from 8,1, it won't reboot and the display on the Uclan says "ult", can't access it with telnet and only the power switch gives a boot, then I can login with telnet.