just an idea...
Did you delete the slot before?
I suspect that the driver may be a problem because of the version number.
OpenPLi-py3
Re: OpenPLi-py3 #301
Re: OpenPLi-py3 #302
Posted 19 April 2022 - 15:19
Yes, I did.
Hardware: Vu+ Uno 4K SE - Vu+ Duo 4K - Fuba 78 cm - Tripleblock LNB Quad 19.2/23.5/28.2 - DS918+
Software : OpenPLi - OSCam - Settings van Hans - Autotimer - EPGImport
---------------------------------------------------------------------------------------------------------------------------------------
Remember: Upvote with the button for any user/post you find to be helpful, informative, or deserving of recognition!
---------------------------------------------------------------------------------------------------------------------------------------
Many answers to your question can be found in our new and improved wiki
Re: OpenPLi-py3 #303
Re: OpenPLi-py3 #304
Posted 19 April 2022 - 20:19
you flash the recovery too ?, we have test 3 uclan rcu all working
old rcu
new rcu
and new premium rcu all ok
i test with openatv
OE-A has SRCDATE = "20220326", which is an older version than uClan has included in our BSP.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Re: OpenPLi-py3 #305
Re: OpenPLi-py3 #306
Posted 20 April 2022 - 20:14
now the develop version of 04/19 is updated ...... the remote still does not work
python3 instead everything ok
Can you also check the media files (avi/mp4//mkvmp3...)?
gst libav was integrated into the build and this should have fixed the media handling problems.
Edited by isteric2005, 20 April 2022 - 20:20.
Re: OpenPLi-py3 #307
Re: OpenPLi-py3 #308
Re: OpenPLi-py3 #309
Re: OpenPLi-py3 #310
Posted 29 May 2022 - 10:33
Kodi doesn't start at all on Ultimo 4K as well.
ChromiumOS and YouTubeTV are now working for the first time in Open PLi image.
Installation of Webkithbbtv and switching to channel supporting HBBTV cause GSOD.
HDMI-CEC still doesn't work properly on Ultimo 4K with same remarks from my previous post #282.
VU+ Ultimo 4K; Clarke-Tech et9000
Re: OpenPLi-py3 #311
Posted 30 May 2022 - 09:22
Please read our point of view on Kodi https://wiki.openpli...d_Kodi_problems
Hardware: Vu+ Uno 4K SE - Vu+ Duo 4K - Fuba 78 cm - Tripleblock LNB Quad 19.2/23.5/28.2 - DS918+
Software : OpenPLi - OSCam - Settings van Hans - Autotimer - EPGImport
---------------------------------------------------------------------------------------------------------------------------------------
Remember: Upvote with the button for any user/post you find to be helpful, informative, or deserving of recognition!
---------------------------------------------------------------------------------------------------------------------------------------
Many answers to your question can be found in our new and improved wiki
Re: OpenPLi-py3 #312
Posted 30 May 2022 - 23:11
Kodi doesn't start at all on Ultimo 4K as well.
ChromiumOS and YouTubeTV are now working for the first time in Open PLi image.
Installation of Webkithbbtv and switching to channel supporting HBBTV cause GSOD.
HDMI-CEC still doesn't work properly on Ultimo 4K with same remarks from my previous post #282.
For Kodi, it just takes one more look.
So a look from another side.
Let's see if Andrea Adami can take a look at it.
GSOD -> please attach the crash-log here.
Re: OpenPLi-py3 #313
Posted 31 May 2022 - 06:43
Kodi doesn't start at all on Ultimo 4K as well.
ChromiumOS and YouTubeTV are now working for the first time in Open PLi image.
Installation of Webkithbbtv and switching to channel supporting HBBTV cause GSOD.
HDMI-CEC still doesn't work properly on Ultimo 4K with same remarks from my previous post #282.
For Kodi, it just takes one more look.
So a look from another side.
Let's see if Andrea Adami can take a look at it.
GSOD -> please attach the crash-log here.
Please find attached webkithbbtv enigma crash and kodi logs.
Attached Files
VU+ Ultimo 4K; Clarke-Tech et9000
Re: OpenPLi-py3 #314
Re: OpenPLi-py3 #315
Posted 1 June 2022 - 11:30
It it only build for a limited number of receivers, so if you can't find one in the download section, it's not build.
Hardware: Vu+ Uno 4K SE - Vu+ Duo 4K - Fuba 78 cm - Tripleblock LNB Quad 19.2/23.5/28.2 - DS918+
Software : OpenPLi - OSCam - Settings van Hans - Autotimer - EPGImport
---------------------------------------------------------------------------------------------------------------------------------------
Remember: Upvote with the button for any user/post you find to be helpful, informative, or deserving of recognition!
---------------------------------------------------------------------------------------------------------------------------------------
Many answers to your question can be found in our new and improved wiki
Re: OpenPLi-py3 #316
Posted 1 June 2022 - 17:44
Where can I find OpenPLi-Pyt3 test image ?
Re: OpenPLi-py3 #317
Re: OpenPLi-py3 #318
Posted 3 June 2022 - 12:41
Kodi py3
From my point of view we need to patch the build of dbus.
2022-05-31 08:35:21.295 T:6076 ERROR <general>: DBus error: org.freedesktop.DBus.Error.ServiceUnknown - The name org.freedesktop.login1 was not provided by any .service files
Maybe just try to take over the bbappend from the OE Alliance.
https://github.com/o...us_1.%.bbappend
The error in Kodi only indicates a Dbus problem.
Perhaps one can test it locally with the appropriate box.
Re: OpenPLi-py3 #319
Posted 5 June 2022 - 07:57
Tested with gbtrio4k.
After rebuild with bbappend (without inherit upx) and force re-install dbus-1, dbus-common and dbus-tools, still error.
Black screen for a few seconds, that's it.
More a of problem?
INFO <general>: CAddonMgr::FindAddons: xbmc.webinterface v1.0.0 installed 2022-06-05 08:47:05.164 T:2069 ERROR <general>: DBus error: org.freedesktop.DBus.Error.ServiceUnknown - The name org.freedesktop.login1 was not provided by any .service files 2022-06-05 08:47:05.182 T:2073 INFO <general>: CAESinkALSA - Unable to open device "surround71" for playback 2022-06-05 08:47:05.186 T:2073 INFO <general>: CAESinkALSA - Unable to open device "surround51" for playback 2022-06-05 08:47:05.186 T:2073 INFO <general>: CAESinkALSA - Unable to open device "surround71" for playback 2022-06-05 08:47:05.187 T:2073 INFO <general>: CAESinkALSA - Unable to open device "surround40" for playback 2022-06-05 08:47:05.187 T:2073 INFO <general>: CAESinkALSA - Unable to open device "surround51" for playback 2022-06-05 08:47:05.187 T:2073 INFO <general>: CAESinkALSA - Unable to open device "surround71" for playback 2022-06-05 08:47:05.224 T:2073 INFO <general>: CAESinkALSA - Unable to open device "oss" for playback 2022-06-05 08:47:05.228 T:2073 INFO <general>: CAESinkALSA - No playback configurations available for device "speex" 2022-06-05 08:47:05.231 T:2073 INFO <general>: CAESinkALSA - No playback configurations available for device "upmix" 2022-06-05 08:47:05.238 T:2073 INFO <general>: CAESinkALSA - Unable to open device "usbstream:CARD=HISIAIAO" for playback 2022-06-05 08:47:05.238 T:2073 INFO <general>: Found 1 Lists of Devices 2022-06-05 08:47:05.238 T:2073 INFO <general>: Enumerated ALSA devices:
Attached Files
Edited by Beeker, 5 June 2022 - 08:06.
Dreambox dm920, Uclan Ustym4Kpro, Gigablue UHD TRIO 4K and Dreambox dm8000. Wavefrontier T55 13.0|19.2|23.5|28.2 + Ziggo.
Re: OpenPLi-py3 #320
Posted 5 June 2022 - 08:00
Kodi doesn't start at all on Ultimo 4K as well.
ChromiumOS and YouTubeTV are now working for the first time in Open PLi image.
Installation of Webkithbbtv and switching to channel supporting HBBTV cause GSOD.
HDMI-CEC still doesn't work properly on Ultimo 4K with same remarks from my previous post #282.
Try this file to Webkithbbtv.
/usr/lib/enigma2/python/Plugins/Extensions/WebkitHbbTV/aitreader.py
Remove file after E2 restart.
Attached Files
Edited by Beeker, 5 June 2022 - 08:01.
Dreambox dm920, Uclan Ustym4Kpro, Gigablue UHD TRIO 4K and Dreambox dm8000. Wavefrontier T55 13.0|19.2|23.5|28.2 + Ziggo.
39 user(s) are reading this topic
0 members, 39 guests, 0 anonymous users