Posted 21 November 2022 - 22:35
lsmod:
bluetooth 389554 4 ipv6 282594 61 brcmfb 1475 2 dvb_bcm72604 1044967 52 brcmfb dvb_base 5457378 5 dvb_bcm72604 bcm_event 2907 5 dvb_bcm72604 procmk 1686 2 bcm_event,dvb_bcm72604 sit2fe 48198 2 dvb_usb_dvbsky 6859 6 dvb_usb_v2_media_tree 21541 1 dvb_usb_dvbsky
Posted 21 November 2022 - 22:35
It only has support for these models:
./conf/machine/vuduo4k.conf:PREFERRED_VERSION_hmp-usb-dvb-t2-c-arm = "V160430" ./conf/machine/vuduo4kse.conf:PREFERRED_VERSION_hmp-usb-dvb-t2-c-arm = "V160430" ./conf/machine/vuuno4kse.conf:PREFERRED_VERSION_hmp-usb-dvb-t2-c-arm = "V160430" ./conf/machine/vuzero4k.conf:PREFERRED_VERSION_hmp-usb-dvb-t2-c-arm = "V160430"
which sort of makes sense, given these boxes run a 4.1.20 kernel, not the old 3.14 one.
I'll try to find some time to port them...
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 21 November 2022 - 22:42
Here is something but IDK if it's useful:
Package: hmp-usb-dvb-t2-c-arm Version: V160430-r1vti004 Description: media tree drivers for hmp-usb-dvb-t2-c media tree drivers for hmp-usb-dvb-t2-c. Section: kernel/modules Priority: optional Maintainer: OE-Core Developers <openembedded-core@lists.openembedded.org> License: GPLv2 Architecture: vuzero4k OE: hmp-usb-dvb-t2-c-arm Homepage: http://linuxtv.org/ Depends: kernel-module-dvb-usb-dvbsky, kernel-module-dvbsky-m88rs6000, kernel-module-dvbsky-m88ds3103, kernel-module-sit2fe, kernel-module-dvb-usb-v2-media-tree Provides: kernel-module-dvb-usb-dvbsky, kernel-module-dvbsky-m88rs6000, kernel-module-dvbsky-m88ds3103, kernel-module-sit2fe, kernel-module-dvb-usb-v2-media-tree Replaces: hmp-usb-dvb-t2-c-v04arm, hmp-usb-dvb-t2-c-v03arm Conflicts: hmp-usb-dvb-t2-c-v04arm, hmp-usb-dvb-t2-c-v03arm Source: http://dvbsky.net/download/linux/media_build-bst-160430.tar.gz file://vu_kernel_4.1.20.patch file://defconfig file://sit2_op.o_150322_arm
Posted 21 November 2022 - 22:47
That's the control file from the ipk, looks like indeed built from those recipies.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 21 November 2022 - 22:50
And it runs great, ATM I'm recording on one tuner and watching on the other.
The only nuisance I have noticed is, it does shows SNR 0% but as long as it works I don't really care :-)
Edited by HWTest, 21 November 2022 - 22:51.
Posted 21 November 2022 - 22:52
You could try to enable "force legacy signal stats" in de tuner configuration, perhaps it doesn't support the DVB API v5, it is a driver from 2016.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 21 November 2022 - 23:01
I've asked Neo to look into porting the drivers.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 21 November 2022 - 23:01
I did try that (and I forgot to mention it), the result is the same 0%
Posted 21 November 2022 - 23:02
It would be great, if the driver could make it into the feed :-)
Posted 21 November 2022 - 23:43
I've asked Neo to look into porting the drivers.
Thanks 
.
It is a bit of a challenge, their custom driver conflicts with the linux kernel driver.
Posted 22 November 2022 - 00:16
HWTest,
could you verify if this one works too?
hmp-usb-dvb-t2-c-arm_V160430-r1.0_vuzero4k.ipk 74.23KB
16 downloads
Posted 22 November 2022 - 16:43
opkg install hmp-usb-dvb-t2-c-arm_V160430-r1.0_vuzero4k.ipk
Collected errors:
* Solver encountered 1 problem(s):
* Problem 1/1:
* - nothing provides kernel-module-dvb-usb-v2-media-tree-4.1.20-1.9 needed by hmp-usb-dvb-t2-c-arm-V160430-r1.0.vuzero4k
*
* Solution 1:
* - do not ask to install hmp-usb-dvb-t2-c-arm-V160430-r1.0.vuzero4k
Posted 22 November 2022 - 16:52
Hmm... I have to double check, I was sure that kernel module was present in the ipk... Could be a missing dependency definition.
Did you try this on a newly flashed box? Or could there be some leftovers from your previous testing present?
Posted 22 November 2022 - 16:56
The one you found defines:
Depends: kernel-module-dvb-usb-dvbsky, kernel-module-dvbsky-m88rs6000, kernel-module-dvbsky-m88ds3103, kernel-module-sit2fe, kernel-module-dvb-usb-v2-media-tree Provides: kernel-module-dvb-usb-dvbsky, kernel-module-dvbsky-m88rs6000, kernel-module-dvbsky-m88ds3103, kernel-module-sit2fe, kernel-module-dvb-usb-v2-media-tree
Mine defines:
Depends: kernel-module-dvb-usb-dvbsky-4.1.20-1.9, kernel-module-dvb-usb-v2-media-tree-4.1.20-1.9, kernel-module-dvbsky-m88ds3103-4.1.20-1.9, kernel-module-dvbsky-m88rs6000-4.1.20-1.9, kernel-module-sit2fe-4.1.20-1.9 Provides: kernel-module-dvb-usb-dvbsky, kernel-module-dvb-usb-v2-media-tree, kernel-module-dvbsky-m88ds3103, kernel-module-dvbsky-m88rs6000, kernel-module-sit2fe
I guess I have to figure out why those kernel versions are there.
Posted 22 November 2022 - 17:18
What I did:
Yesterday
restored my 8.0 backup
disabled both tuners
reboot
removed the T330 drivers
reboot
flashed 8.3 with settings restore
reboot
software upgraded to the latest
reboot
installed the VTI driver
Today
disabled both tuners
reboot
uninstalled the VTI driver
reboot
tried to install the provided driver - failed
installed the VTI driver
reboot
enabled both tuners
Posted 22 November 2022 - 17:21
I'll ask him to build a test image for the Zero 4K, so I can test using mine.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 3 December 2022 - 15:22
I tried at least the modules (files) from the package made by neo, replacing the original VTI files.
It works :-)
Posted 3 December 2022 - 16:26
@Neo, could you update the bsp?
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 5 July 2024 - 08:09
Posted 5 July 2024 - 14:39
Is for newer Linux kernels, for the Solo2 (Kernel 3.3.8) you need the older Turbo USB.
Vu+ DUO 4K - 1x FBC DUAL DVB-S2X v2 tuner + 1x VU+ FBC DVB-C v2 tuner + 1 x Hauppauge Dual Tuner USB DVB-C / DVB-T -- Vu+ Ultimo 4K - 2x FBC DUAL DVB-S2X v2 tuner + 1 x VU+ DVB-C/T/T2 DUAL (TWIN) tuner + 1 x VU+ Turbo USB DVB-C/T2 Hybrid Tuner -- 2 x Triple LNB 
0 members, 1 guests, 0 anonymous users
