Jump to content


Photo

Vu+ turbo usb tuner dvb-c/t2 setup


  • Please log in to reply
129 replies to this topic

Re: Vu+ turbo usb tuner dvb-c/t2 setup #81 HWTest

  • Senior Member
  • 152 posts

+3
Neutral

Posted 21 November 2022 - 22:35

lsmod:

bluetooth             389554  4
ipv6                  282594  61
brcmfb                  1475  2
dvb_bcm72604         1044967  52 brcmfb
dvb_base             5457378  5 dvb_bcm72604
bcm_event               2907  5 dvb_bcm72604
procmk                  1686  2 bcm_event,dvb_bcm72604
sit2fe                 48198  2
dvb_usb_dvbsky          6859  6
dvb_usb_v2_media_tree    21541  1 dvb_usb_dvbsky

 



Re: Vu+ turbo usb tuner dvb-c/t2 setup #82 WanWizard

  • PLi® Core member
  • 70,497 posts

+1,810
Excellent

Posted 21 November 2022 - 22:35

It only has support for these models:

./conf/machine/vuduo4k.conf:PREFERRED_VERSION_hmp-usb-dvb-t2-c-arm = "V160430"
./conf/machine/vuduo4kse.conf:PREFERRED_VERSION_hmp-usb-dvb-t2-c-arm = "V160430"
./conf/machine/vuuno4kse.conf:PREFERRED_VERSION_hmp-usb-dvb-t2-c-arm = "V160430"
./conf/machine/vuzero4k.conf:PREFERRED_VERSION_hmp-usb-dvb-t2-c-arm = "V160430"

which sort of makes sense, given these boxes run a 4.1.20 kernel, not the old 3.14 one.

 

I'll try to find some time to port them...


Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)

Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.

Many answers to your question can be found in our new and improved wiki.


Re: Vu+ turbo usb tuner dvb-c/t2 setup #83 HWTest

  • Senior Member
  • 152 posts

+3
Neutral

Posted 21 November 2022 - 22:42

Here is something but IDK if it's useful:

Package: hmp-usb-dvb-t2-c-arm
Version: V160430-r1vti004
Description: media tree drivers for hmp-usb-dvb-t2-c
 media tree drivers for hmp-usb-dvb-t2-c.
Section: kernel/modules
Priority: optional
Maintainer: OE-Core Developers <openembedded-core@lists.openembedded.org>
License: GPLv2
Architecture: vuzero4k
OE: hmp-usb-dvb-t2-c-arm
Homepage: http://linuxtv.org/
Depends: kernel-module-dvb-usb-dvbsky, kernel-module-dvbsky-m88rs6000, kernel-module-dvbsky-m88ds3103, kernel-module-sit2fe, kernel-module-dvb-usb-v2-media-tree
Provides: kernel-module-dvb-usb-dvbsky, kernel-module-dvbsky-m88rs6000, kernel-module-dvbsky-m88ds3103, kernel-module-sit2fe, kernel-module-dvb-usb-v2-media-tree
Replaces: hmp-usb-dvb-t2-c-v04arm, hmp-usb-dvb-t2-c-v03arm
Conflicts: hmp-usb-dvb-t2-c-v04arm, hmp-usb-dvb-t2-c-v03arm
Source: http://dvbsky.net/download/linux/media_build-bst-160430.tar.gz file://vu_kernel_4.1.20.patch file://defconfig file://sit2_op.o_150322_arm 

 



Re: Vu+ turbo usb tuner dvb-c/t2 setup #84 WanWizard

  • PLi® Core member
  • 70,497 posts

+1,810
Excellent

Posted 21 November 2022 - 22:47

That's the control file from the ipk, looks like indeed built from those recipies.


Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)

Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.

Many answers to your question can be found in our new and improved wiki.


Re: Vu+ turbo usb tuner dvb-c/t2 setup #85 HWTest

  • Senior Member
  • 152 posts

+3
Neutral

Posted 21 November 2022 - 22:50

And it runs great, ATM I'm recording on one tuner and watching on the other.

The only nuisance I have noticed is, it does shows SNR 0% but as long as it works I don't really care :-)


Edited by HWTest, 21 November 2022 - 22:51.


Re: Vu+ turbo usb tuner dvb-c/t2 setup #86 WanWizard

  • PLi® Core member
  • 70,497 posts

+1,810
Excellent

Posted 21 November 2022 - 22:52

You could try to enable "force legacy signal stats" in de tuner configuration, perhaps it doesn't support the DVB API v5, it is a driver from 2016.


Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)

Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.

Many answers to your question can be found in our new and improved wiki.


Re: Vu+ turbo usb tuner dvb-c/t2 setup #87 WanWizard

  • PLi® Core member
  • 70,497 posts

+1,810
Excellent

Posted 21 November 2022 - 23:01

I've asked Neo to look into porting the drivers.


Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)

Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.

Many answers to your question can be found in our new and improved wiki.


Re: Vu+ turbo usb tuner dvb-c/t2 setup #88 HWTest

  • Senior Member
  • 152 posts

+3
Neutral

Posted 21 November 2022 - 23:01

I did try that (and I forgot to mention it), the result is the same 0%



Re: Vu+ turbo usb tuner dvb-c/t2 setup #89 HWTest

  • Senior Member
  • 152 posts

+3
Neutral

Posted 21 November 2022 - 23:02

It would be great, if the driver could make it into the feed :-)



Re: Vu+ turbo usb tuner dvb-c/t2 setup #90 neo

  • PLi® Contributor
  • 715 posts

+48
Good

Posted 21 November 2022 - 23:43

I've asked Neo to look into porting the drivers.

 

Thanks ;).

 

It is a bit of a challenge, their custom driver conflicts with the linux kernel driver.



Re: Vu+ turbo usb tuner dvb-c/t2 setup #91 neo

  • PLi® Contributor
  • 715 posts

+48
Good

Posted 22 November 2022 - 00:16

HWTest,

 

could you verify if this one works too?

Attached Files



Re: Vu+ turbo usb tuner dvb-c/t2 setup #92 HWTest

  • Senior Member
  • 152 posts

+3
Neutral

Posted 22 November 2022 - 16:43

opkg install hmp-usb-dvb-t2-c-arm_V160430-r1.0_vuzero4k.ipk

Collected errors:
 * Solver encountered 1 problem(s):
 * Problem 1/1:
 *   - nothing provides kernel-module-dvb-usb-v2-media-tree-4.1.20-1.9 needed by hmp-usb-dvb-t2-c-arm-V160430-r1.0.vuzero4k
 *
 * Solution 1:
 *   - do not ask to install hmp-usb-dvb-t2-c-arm-V160430-r1.0.vuzero4k

 



Re: Vu+ turbo usb tuner dvb-c/t2 setup #93 neo

  • PLi® Contributor
  • 715 posts

+48
Good

Posted 22 November 2022 - 16:52

Hmm... I have to double check, I was sure that kernel module was present in the ipk... Could be a missing dependency definition.

 

Did you try this on a newly flashed box? Or could there be some leftovers from your previous testing present?



Re: Vu+ turbo usb tuner dvb-c/t2 setup #94 neo

  • PLi® Contributor
  • 715 posts

+48
Good

Posted 22 November 2022 - 16:56

The one you found defines:

Depends: kernel-module-dvb-usb-dvbsky, kernel-module-dvbsky-m88rs6000, kernel-module-dvbsky-m88ds3103, kernel-module-sit2fe, kernel-module-dvb-usb-v2-media-tree
Provides: kernel-module-dvb-usb-dvbsky, kernel-module-dvbsky-m88rs6000, kernel-module-dvbsky-m88ds3103, kernel-module-sit2fe, kernel-module-dvb-usb-v2-media-tree

Mine defines:

Depends: kernel-module-dvb-usb-dvbsky-4.1.20-1.9, kernel-module-dvb-usb-v2-media-tree-4.1.20-1.9, kernel-module-dvbsky-m88ds3103-4.1.20-1.9, kernel-module-dvbsky-m88rs6000-4.1.20-1.9, kernel-module-sit2fe-4.1.20-1.9
Provides: kernel-module-dvb-usb-dvbsky, kernel-module-dvb-usb-v2-media-tree, kernel-module-dvbsky-m88ds3103, kernel-module-dvbsky-m88rs6000, kernel-module-sit2fe

I guess I have to figure out why those kernel versions are there.
 



Re: Vu+ turbo usb tuner dvb-c/t2 setup #95 HWTest

  • Senior Member
  • 152 posts

+3
Neutral

Posted 22 November 2022 - 17:18

What I did:

 

Yesterday

restored my 8.0 backup

disabled both tuners

reboot

removed the T330 drivers

reboot

flashed 8.3 with settings restore

reboot

software upgraded to the latest

reboot

installed the VTI driver

 

Today

disabled both tuners

reboot

 

uninstalled the VTI driver

reboot

tried to install the provided driver - failed

installed the VTI driver

reboot

enabled both tuners



Re: Vu+ turbo usb tuner dvb-c/t2 setup #96 WanWizard

  • PLi® Core member
  • 70,497 posts

+1,810
Excellent

Posted 22 November 2022 - 17:21

I'll ask him to build a test image for the Zero 4K, so I can test using mine.


Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)

Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.

Many answers to your question can be found in our new and improved wiki.


Re: Vu+ turbo usb tuner dvb-c/t2 setup #97 HWTest

  • Senior Member
  • 152 posts

+3
Neutral

Posted 3 December 2022 - 15:22

I tried at least the modules (files) from the package made by neo, replacing the original VTI files.

It works :-)



Re: Vu+ turbo usb tuner dvb-c/t2 setup #98 WanWizard

  • PLi® Core member
  • 70,497 posts

+1,810
Excellent

Posted 3 December 2022 - 16:26

@Neo, could you update the bsp?


Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)

Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.

Many answers to your question can be found in our new and improved wiki.


Re: Vu+ turbo usb tuner dvb-c/t2 setup #99 zajszan

  • Member
  • 7 posts

+1
Neutral

Posted 5 July 2024 - 08:09

Hello!
Can't get the tuner to work (Vu+ Turbo SE)
On older Vu+Solo2 devices?
Thank you.


Re: Vu+ turbo usb tuner dvb-c/t2 setup #100 pgmpli

  • Senior Member
  • 665 posts

+24
Neutral

Posted 5 July 2024 - 14:39

Is for newer Linux kernels, for the Solo2 (Kernel 3.3.8) you need the older Turbo USB.


Vu+ DUO 4K - 1x FBC DUAL DVB-S2X v2 tuner + 1x VU+ FBC DVB-C v2 tuner + 1 x Hauppauge Dual Tuner USB DVB-C / DVB-T  --  Vu+ Ultimo 4K - 2x FBC DUAL DVB-S2X v2 tuner + 1 x VU+ DVB-C/T/T2 DUAL (TWIN) tuner + 1 x VU+ Turbo USB DVB-C/T2 Hybrid Tuner -- 2 x Triple LNB  :)



4 user(s) are reading this topic

0 members, 4 guests, 0 anonymous users