New open source frontend driver Repository: https://github.com/edision-open/dvb-frontends-avl62x1
+
blindscan source
https://github.com/e...-open/blindscan
Edited by Dimitrij, 21 December 2023 - 11:07.
Posted 21 December 2023 - 11:03
New open source frontend driver Repository: https://github.com/edision-open/dvb-frontends-avl62x1
+
blindscan source
https://github.com/e...-open/blindscan
Edited by Dimitrij, 21 December 2023 - 11:07.
GigaBlue UHD Quad 4K /Lunix3-4K/Duo 4K
Posted 21 December 2023 - 11:14
As far as I can see, that repo isn't (directly) used, the blindscan utils come from https://github.com/e...blindscan-utils, from where a zip is fetched.
https://github.com/O...dscan-utils.inc
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 21 December 2023 - 11:49
It would be possible to update it via patch.
But is the tuning error really due to the blind scan?
mh...
Ok
https://github.com/o...-osmio4k.bb#L17
vs
https://github.com/o...-osmio4k.bb#L17
and differnet sha checksum.
So OE-Alliance actually has a different driver. We can also switch to the source.
Edited by rantanplan, 21 December 2023 - 12:07.
Posted 21 December 2023 - 12:20
As I understand it, it also doesn't work in ATV 7.x.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 21 December 2023 - 13:21
Ok, I misunderstood that at first.
Is it the blinscan that is causing the error?
Shouldn't you look for the error in the driver?
Both sources are available
https://github.com/e...ontends-avl62x1
Posted 21 December 2023 - 23:39
1)When go another service/satttelite same messsage "Tune failed"?
2)When not use standby all switch services work?
When I get the message "Tune failed" nothing work on tuner A (DVB-S2X). I can change channels, transponders or satellites, all have “Tune failed”. If I go to tuner B (DVB-T2) it works OK. I have to restart the receiver when I get the message “Tune failed”. Switching OFF/ON on the remote control or restarting just Enigma doesn't resolve the problem.
Posted 21 December 2023 - 23:53
Ok, I misunderstood that at first.
Is it the blinscan that is causing the error?
Shouldn't you look for the error in the driver?
Both sources are available
https://github.com/e...ontends-avl62x1
I think is a driver error.
Yesterday I made this test:
Fresh installation of OPENPLI 9.0. I made a manual scan just of CH 27 (DVB-T) and DVB-S2X 9°E 12466V 16APSK 419502/3 PLS Gold 262140 Multistream Stream 12. The transponder data were in the image. Then I switched OFF the receiver with remote control and after 30 minutes I switched ON the receiver with remote control and I got the same message “Tune failed” There were no channel list installed, no picons, no plugin, no internet connection, no nothing. Everything was set by default in settings.
Posted 21 December 2023 - 23:56
Ok, I misunderstood that at first.
Is it the blinscan that is causing the error?
Shouldn't you look for the error in the driver?
Both sources are available
https://github.com/e...ontends-avl62x1
What should I do?
Posted 22 December 2023 - 01:09
There are several ways to approach it.
We have an open source here and could recompile the driver.
But defining the error precisely is certainly not easy.
I doubt whether the old driver will still work in the new kernel after a kernel update.
Of course you could try it too.
Posted 22 December 2023 - 06:01
GigaBlue UHD Quad 4K /Lunix3-4K/Duo 4K
Posted 22 December 2023 - 09:18
Please, write me how to change (tu put) a new driver in my receiver. I have Putty, but the only thing I "put" in the receiver manualy was multistalker. Plugins, picons, ... I used the receiver menu.
Posted 22 December 2023 - 12:56
Oh well...
For anyone who builds images as a hobby (like us here), something like this is interesting.
Some people might be interested in making such an update.
But it's a 'free flight' for everyone who doesn't have the tuner or the receiver.
Unfortunately, we cannot view the history of the driver in Edision's git.
Maybe athoik knows more.
Overall, you don't know whether the driver is actually the problem or whether the implementation of Python itself is causing the problem.
A neutrino image might be worth a reference test.
Posted 22 December 2023 - 14:06
If there is some driver issue, it affects all other images using the same driver.
But I don't understand why do you need to wait 20-30 minutes for the problem to appear?
Does anyone else have the same problem? For example wet or loose F-connector can cause strange problems.
It's also possible to test driver from github, build instructions are there.
Posted 22 December 2023 - 14:10
Oh well...
For anyone who builds images as a hobby (like us here), something like this is interesting.
Some people might be interested in making such an update.
But it's a 'free flight' for everyone who doesn't have the tuner or the receiver.
Unfortunately, we cannot view the history of the driver in Edision's git.
Maybe athoik knows more.
Overall, you don't know whether the driver is actually the problem or whether the implementation of Python itself is causing the problem.
A neutrino image might be worth a reference test.
OK for me, I can make all tests you write to make. Just write me where can I get neutrino image and I will install and check it.
Posted 22 December 2023 - 16:19
Oh well...
For anyone who builds images as a hobby (like us here), something like this is interesting.
Some people might be interested in making such an update.
But it's a 'free flight' for everyone who doesn't have the tuner or the receiver.
Unfortunately, we cannot view the history of the driver in Edision's git.
Maybe athoik knows more.
Overall, you don't know whether the driver is actually the problem or whether the implementation of Python itself is causing the problem.
A neutrino image might be worth a reference test.OK for me, I can make all tests you write to make. Just write me where can I get neutrino image and I will install and check it.
Do you understand how to use telnet?
Do you understand and know how to make changes to system files in your receiver?
Can you recover the receiver if it gets stuck in Boot or if it gets stuck in a Boot Loop?
I suggest you stop looking for solutions that you have to install in the receiver's files If your answer is No to any of these questions.
Kriege Sendersuchlauf nicht mehr hin ...Started by meierblom, 18 Mar 2024 sendersuchlauf, tuner |
|
|||
Tuner settingsStarted by Bloe, 18 Mar 2021 Monoblock, Switch, Singel lnb and 2 more... |
|
|||
Multistream t2 mi Yamai 55 oost probleemStarted by Phoenixx, 14 Mar 2021 Multistream, tuner, yamai |
|
|||
Tuner lijkt te verdwijnen op ET6500Started by argearge1, 9 Jan 2021 tuner |
|
|||
Plugin - Ability to retrieve NIB tuner configuration settings?Started by LoveMyDish, 4 Nov 2019 plugins, tuner |
|
0 members, 7 guests, 0 anonymous users