6 replies to this topic

[MifPT]

Hi all,

 

I am unable to access the softcams downloadable plug in.

This option is non-existent in the "green button" menu...

I only have the options:     SystemPlugins;  picons;  drivers;  extensions;  skins   [See the attachment]

I believe I'm missing: settings;  security and softcams

 

Does anyone knows a simple way to get them? 

(Apologies for the simple request, but I'm not an IT wizard..)

 

Thank you in advance,

MifPT

 

 

Attached Files

•  Plugin.jpg   61.78KB   5 downloads

[littlesat]

Are you sure this is a genuine openpli image as softcams should be in the feed… or maybe you already installed all possible softcams…

[Tech]

Are you sure this is a genuine openpli image as softcams should be in the feed… or maybe you already installed all possible softcams…

Even if all softcams were installed, the menu item should be visible.

 

Are you sure this is a genuine OpenPLi image or is it a box delivered by someone who also delivered other 'services' ? In that case you should install a fresh image on your STB.

[MifPT]

Are you sure this is a genuine openpli image as softcams should be in the feed… or maybe you already installed all possible softcams…

 

 

I'm not sure... I'm not an expert.... How would I find that?

[MifPT]

 

Are you sure this is a genuine openpli image as softcams should be in the feed… or maybe you already installed all possible softcams…

Even if all softcams were installed, the menu item should be visible.

 

Are you sure this is a genuine OpenPLi image or is it a box delivered by someone who also delivered other 'services' ? In that case you should install a fresh image on your STB.

 

 

 

 

Thanks for the help from yourself and littlesat.

 

 

I might to what you're suggesting and install a fresh copy of the Openpli into it...

 

I'll see if I can find any manuals to help me through...

 

Thanks.

[littlesat]

I recommend to check our WiKi https://wiki.openpli...h_your_receiver

[MifPT]

Folks,

 

Thank you all for the support and the help.

I finaly managed to install the latrest updated image of OpenPli.

 

I leave you here how I managed to do it on my Zgemma H8.2 box:

1. Download the latest image onto a FAT32 USB stick and extract it on the root folder.

2. Shut down the box - using the power button on the back of the unit. - Use the hardware button NOT the power button on the remote.

3. Plug in the 32FAT USB stick with the image in it.

4. Press the MENU key on the remote and keep pressing it all the time.

5. Power the unit back ON again using the same power button on the back of the receiver

6. When you see the first image when powering up. STOP pressing the MENU button (release it).

7. The box will automatically update the image.

 

I wasn't releasing the MENU button, and the box wasn't updating... - this was my error.

 

 

To you all thank you for the suggestions and help.

Much appreciated,

MifPT