Jump to content


Clown

Member Since 13 Aug 2010
Offline Last Active 26 Aug 2020 14:48
-----

Posts I've Made

In Topic: DVB-C tuner unable to find/scan cable channels

26 August 2020 - 14:46

I received the new tuner today (the same model: TT2L10) and it tunes fine. HM-Sat said they verified the original tuner was faulty.

Like Twol said...I think I shoulda got the updated tuner, but I'm not bothered as I'm finished with cable in about a year. I would never order from HM-Sat again. I ordered a STB, splitter and Unicable LNB; splitter was wrong brand, tuner was faulty and looked used (corrosion on board and mounting holes). I haven't connected the LNB yet??

Thanks for everyone's help on here.


In Topic: DVB-C tuner unable to find/scan cable channels

20 August 2020 - 22:10

Hi Twol

 

Thanks for your help.

 

I contacted HM-Sat today, I advised them of the info you gave me from the Impex/Gigablue website, and I'm returning the tuner.

 

I'm not quite sure which tuner they are going to send, but I sent them a link from Impex/Gigablue website about which tuners are supported by Gigablue UHD UE 4K.  We'll see what happens.

 

Thanks for everyone's help.


In Topic: DVB-C tuner unable to find/scan cable channels

19 August 2020 - 20:52

Hi Abu,

 

your  "cat /proc/bus/nim_sockets" is exactly the same as mine...correct?

 

This means the STB is correctly recognizing the tuner, correct?

 

Thanks for your help.

 


In Topic: DVB-C tuner unable to find/scan cable channels

19 August 2020 - 13:41

Thanks for your help Dimitrij.

 

Here is the telnet output:

 

NIM Socket 0:
        Type: DVB-S2X
        Name: DVB-S2X NIM(45308X FBC)
        Frontend_Device: 0
        I2C_Device: 3
NIM Socket 1:
        Type: DVB-S2X
        Name: DVB-S2X NIM(45308X FBC)
        Frontend_Device: 1
        I2C_Device: 3
NIM Socket 2:
        Type: DVB-S2X
        Name: DVB-S2X NIM(45308X FBC)
        Frontend_Device: 2
        I2C_Device: 3
NIM Socket 3:
        Type: DVB-S2X
        Name: DVB-S2X NIM(45308X FBC)
        Frontend_Device: 3
        I2C_Device: 3
NIM Socket 4:
        Type: DVB-S2X
        Name: DVB-S2X NIM(45308X FBC)
        Frontend_Device: 4
        I2C_Device: 3
NIM Socket 5:
        Type: DVB-S2X
        Name: DVB-S2X NIM(45308X FBC)
        Frontend_Device: 5
        I2C_Device: 3
NIM Socket 6:
        Type: DVB-S2X
        Name: DVB-S2X NIM(45308X FBC)
        Frontend_Device: 6
        I2C_Device: 3
NIM Socket 7:
        Type: DVB-S2X
        Name: DVB-S2X NIM(45308X FBC)
        Frontend_Device: 7
        I2C_Device: 3
NIM Socket 8:
        Type: DVB-C
        Name: GIGA DVB-T2/C NIM (TT2L10)
        Has_Outputs: yes
        Frontend_Device: 8
        Mode 0:DVB-C
        Mode 1:DVB-T2
        I2C_Device: 4


In Topic: DVB-C tuner unable to find/scan cable channels

18 August 2020 - 23:25

Thanks to everyone for your replies,

 

I transferred my old/saved channel list using DBEdit to my new Gigablue, and the cable channels are not tuning.

 

The tuner is configured for cable. 

 

I have tried every available image for this receiver with the same results.

 

I think maybe the tuner is AFU.

 

I'll contact the seller(HM-Sat.de) tomorrow.

 

Once again, thanks for your replies.