Jump to content


ambrosa

Member Since 11 Oct 2011
Offline Last Active 17 Dec 2012 18:21
*****

Posts I've Made

In Topic: Today upgrade make my STB not working

17 December 2012 - 18:23

Problem solved.

I've just flash my STB with today image (et9x00 2012-12-17) , installed a867 kernel module and all works fine.

Now a867 module is loaded AFTER dvb-s2 frontend

DVB: registering new adapter (dvb0)
DVB: registering adapter 0 frontend 0 (DVB-S2)...
DVB: registering adapter 0 frontend 1 (DVB-S2)...
input: front panel as /devices/virtual/input/input2
AVerMedia A867 driver module V1.0.27 loaded.
dvb-usb: found a 'AVerMedia A867 DVB-T Recevier' in warm state.
dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
DVB: registering new adapter (AVerMedia A867 DVB-T Recevier)
DVB: registering adapter 1 frontend 0 (A867 USB DVB-T)...
dvb-usb: AVerMedia A867 DVB-T Recevier successfully initialized and connected.
usbcore: registered new interface driver dvb-usb-a867

In Topic: Today upgrade make my STB not working

16 December 2012 - 20:03

Do you use autobackup? Perhaps delete autobackup settings and try fresh flash again.
That way you can be absolutely sure that no old / incorrect settings are reapplied.


No, I hate autobackup for the same reasons :-)

In Topic: Today upgrade make my STB not working

16 December 2012 - 19:19

Milo is referring to this fix (I presume): http://openpli.git.s...57b006cd27adf87


Looks to be fine...

Removing USB modules and reboot, system is working again (only with DVB-S2 tuners obviously)

root@et9x00:~# opkg remove kernel-module-dvb-usb-a867
Removing package kernel-module-dvb-usb-a867 from root...
root@et9x00:~# opkg remove kernel-module-dvb-usb
Removing package kernel-module-dvb-usb from root...

In Topic: Today upgrade make my STB not working

16 December 2012 - 19:11

Thanks Milo.

BTW I've just flash with previous image OpenPLi-3.0-beta-et9x00-20121215_usb.zip (yesterday image) and IT WORKS.

Then I've made just now (19:03 CET) an opkg update + upgrade and then reboot.
System IS WORKING again (??)

Then I've installed A867 kernel module 'opkg install kernel-module-dvb-usb-a867' and reboot.
After that system STOP WORKING as before.

All tuners (DVB-S2 and DTT) stop working after loading A867 kernel module.

In Topic: Today upgrade make my STB not working

16 December 2012 - 18:27

NO SUCCESS

I've just reflash from scratch my CT9100 with OpenPLi-3.0-beta-et9x00-20121216_usb.zip

- flash ok
- initial setup ok
- install A867 kernel module ok

Exactly as before: third tuner (DTT A867) is missing (dmesg is ok as before), Tuner A&B (DVB-S2) correctly configured but same error as before.
Full scan not working: search exit immediately

HyperBUG somewhere.....