franco888999

Hi,


I want to install a s2-3600 in my vu+ uno but this module isn't present in opkg list nor is installed with the enigma2 plug-in facility, is a bug of the image builder?
Where I can download this module please?

Thanks.

Hi,

This is the dmesg:


usb 1-1: new high speed USB device number 2 using ehci-brcm
dvb-usb: found a 'TeVii S660 USB' in cold state, will try to load a firmware
dvb-usb: downloading firmware from file 'dvb-usb-s660.fw'
dw2102: start downloading DW210X firmware
dvb-usb: found a 'TeVii S660 USB' in warm state.
dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
DVB: registering new adapter (TeVii S660 USB)
dvb-usb: MAC address: 01:01:01:01:01:01
Invalid probe, probably not a DS3000
dvb-usb: no frontend was attached by 'TeVii S660 USB'
input: IR-receiver inside an USB DVB receiver as /devices/platform/ehci-brcm.0/usb1/1-1/input/input1
dvb-usb: schedule remote query interval to 150 msecs.
dvb-usb: TeVii S660 USB successfully initialized and connected.
usb 1-1: USB disconnect, device number 2
dvb-usb: TeVii S660 USB successfully deinitialized and disconnected.
usb 1-1: new high speed USB device number 3 using ehci-brcm
usb 1-1: config 1 interface 0 altsetting 0 bulk endpoint 0x81 has invalid maxpacket 2
dvb-usb: found a 'TeVii S660 USB' in cold state, will try to load a firmware
dvb-usb: downloading firmware from file 'dvb-usb-s660.fw'
dw2102: start downloading DW210X firmware
dvb-usb: found a 'TeVii S660 USB' in warm state.
dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
DVB: registering new adapter (TeVii S660 USB)
dvb-usb: MAC address: 00:18:bd:5c:38:4f
DS3000 chip version: 0.192 attached.
dw2102: Attached ds3000+ds2020!

DVB: registering adapter 1 frontend 0 (Montage Technology DS3000/TS2020)...
input: IR-receiver inside an USB DVB receiver as /devices/platform/ehci-brcm.0/usb1/1-1/input/input2
dvb-usb: schedule remote query interval to 150 msecs.
dvb-usb: TeVii S660 USB successfully initialized and connected.
ds3000_firmware_ondemand: Waiting for firmware upload (dvb-fe-ds3000.fw)...
ds3000_firmware_ondemand: Waiting for firmware upload(2)...
DVB: registering adapter 0 frontend 0 (Montage Technology DS3000/TS2020)...

It seems to be ok, but when I change the channel from SD to HD the letter of the tuner turn green but the channel doesn't display, below other line of dmesg:


[VID]: VIDEO_SLOWMOTION 0 1
[VID]: VIDEO_FAST_FORWARD 0 1
[VID]: VIDEO_CONTINUE 1 1
[AUD]: AUDIO_CONTINUE 1 1 audio pid_hndl : 0xe0af2c94
[AUD]: setting mute : 0
[VID]: VIDEO_GET_SIZE src w: 0 h:0 display w:0 h:0
[VID]: VIDEO_GET_SIZE aspect: 1 0
[VID]: VIDEO_STOP 1 1
[AUD]: AUDIO_STOP 1
[AUD]: AUDIO_CONTINUE 1 0 audio pid_hndl : 0x0
[AUD]: AUDIO_CONTINUE:bcm7335->audio_pid_hndl is null 0 0
[AUD]: AUDIO_SET_BYPASS_MODE 1
[AUD]: proc_get_ac3 0 audio_passthrough_spdif : 0
[AUD]: AUDIO_PAUSE 1
[AUD]: AUDIO_PLAY 1 decoder start : 0
[VID]: VIDEO_SET_STREAMTYPE 0
[VID]: VIDEO_FREEZE 1 0
[VID]: VIDEO_PLAY 1 2 2
[VID]: VIDEO_SLOWMOTION 0 1
[VID]: VIDEO_FAST_FORWARD 0 1
[VID]: VIDEO_CONTINUE 1 1
[AUD]: AUDIO_CONTINUE 1 1 audio pid_hndl : 0xe0af2c94
[AUD]: setting mute : 0
[VID]: VIDEO_GET_SIZE src w: 0 h:0 display w:0 h:0
[VID]: VIDEO_GET_SIZE aspect: 1 0
[VID]: VIDEO_STOP 1 1
[AUD]: AUDIO_STOP 1
[AUD]: AUDIO_CONTINUE 1 0 audio pid_hndl : 0x0
[AUD]: AUDIO_CONTINUE:bcm7335->audio_pid_hndl is null 0 0
[AUD]: AUDIO_SET_BYPASS_MODE 1
[AUD]: proc_get_ac3 0 audio_passthrough_spdif : 0
[AUD]: AUDIO_PAUSE 1
[AUD]: AUDIO_PLAY 1 decoder start : 0
[VID]: VIDEO_SET_STREAMTYPE 0
[VID]: VIDEO_FREEZE 1 0
[VID]: VIDEO_PLAY 1 2 2
[VID]: VIDEO_SLOWMOTION 0 1
[VID]: VIDEO_FAST_FORWARD 0 1
[VID]: VIDEO_CONTINUE 1 1
[AUD]: AUDIO_CONTINUE 1 1 audio pid_hndl : 0xe0af2c94
[AUD]: setting mute : 0
[VID]: VIDEO_GET_SIZE src w: 0 h:0 display w:0 h:0
[VID]: VIDEO_GET_SIZE aspect: 1 0
[VID]: VIDEO_STOP 1 1
[AUD]: AUDIO_STOP 1
[AUD]: AUDIO_CONTINUE 1 0 audio pid_hndl : 0x0
[AUD]: AUDIO_CONTINUE:bcm7335->audio_pid_hndl is null 0 0
[AUD]: AUDIO_SET_BYPASS_MODE 1
[AUD]: proc_get_ac3 0 audio_passthrough_spdif : 0
[AUD]: AUDIO_PAUSE 1
[AUD]: AUDIO_PLAY 1 decoder start : 0
[VID]: VIDEO_SET_STREAMTYPE 0
[VID]: VIDEO_FREEZE 1 0
[VID]: VIDEO_PLAY 1 2 2
[VID]: VIDEO_SLOWMOTION 0 1
[VID]: VIDEO_FAST_FORWARD 0 1
[VID]: VIDEO_CONTINUE 1 1
[AUD]: AUDIO_CONTINUE 1 1 audio pid_hndl : 0xe0af2c94
[AUD]: setting mute : 0
[VID]: VIDEO_GET_SIZE src w: 0 h:0 display w:0 h:0
[VID]: VIDEO_GET_SIZE aspect: 1 0
root@vuuno:~#


Please there is someone that can tell me what wrong?

The best regards