Jump to content

  2. → Viewing Profile: Reputation: pameijer

pameijer

Member Since 8 Mar 2012
Offline Last Active 16 Nov 2024 13:22
-----

#681731 zenderlijst vu+ solo 4K

Posted by pameijer on 10 March 2017 - 09:09

De lijst die je hebt is van Hans. Deze kan er handmatig ingezet zijn of via de feed. Kijk even onder je applicaties -> verwijderen -> settings of daar de lijst tussen staat. Zo ja, dan wordt hij geüpdatet als je de box zelf een update geeft.




#443244 Waar vind ik smartmontools?

Posted by pameijer on 12 September 2014 - 06:46

Vannacht maar even de de longrun test gedaan. Resultaat na deze test:

 

root@vuultimo:~# smartctl -a /dev/sda1
smartctl 5.42 2011-10-20 r3458 [mips-linux-3.1.1] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF INFORMATION SECTION ===
Model Family:     Western Digital Caviar Green (Adv. Format)
Device Model:     WDC WD10EARX-00N0YB0
Serial Number:    WD-WMC0S0345553
LU WWN Device Id: 5 0014ee 2b1474134
Firmware Version: 51.0AB51
User Capacity:    1,000,204,886,016 bytes [1.00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   8
ATA Standard is:  Exact ATA specification draft version not indicated
Local Time is:    Fri Sep 12 07:34:28 2014 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82)	Offline data collection activity
					was completed without error.
					Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(19800) seconds.
Offline data collection
capabilities: 			 (0x7b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 ( 193) minutes.
Conveyance self-test routine
recommended polling time: 	 (   5) minutes.
SCT capabilities: 	       (0x30b5)	SCT Status supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x002f   200   200   051    Pre-fail  Always       -       0
  3 Spin_Up_Time            0x0027   122   111   021    Pre-fail  Always       -       6900
  4 Start_Stop_Count        0x0032   098   098   000    Old_age   Always       -       2978
  5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x002e   200   200   000    Old_age   Always       -       0
  9 Power_On_Hours          0x0032   091   091   000    Old_age   Always       -       6977
 10 Spin_Retry_Count        0x0032   100   100   000    Old_age   Always       -       0
 11 Calibration_Retry_Count 0x0032   100   100   000    Old_age   Always       -       0
 12 Power_Cycle_Count       0x0032   099   099   000    Old_age   Always       -       1700
192 Power-Off_Retract_Count 0x0032   198   198   000    Old_age   Always       -       1688
193 Load_Cycle_Count        0x0032   196   196   000    Old_age   Always       -       12531
194 Temperature_Celsius     0x0022   101   088   000    Old_age   Always       -       46
196 Reallocated_Event_Count 0x0032   200   200   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0032   200   200   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0030   200   200   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x0032   200   200   000    Old_age   Always       -       0
200 Multi_Zone_Error_Rate   0x0008   200   200   000    Old_age   Offline      -       0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Extended offline    Completed without error       00%      6972         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

Dit lijkt mij verder goed?




#415209 Kanalenlijst Hans van 1 april 2014

Posted by pameijer on 1 April 2014 - 20:49

Bedankt! Was net van plan te gaan updaten naar OpenPLI 4.0, nu mooi met een verse zenderlijst.




  1. Forums
  2. → Viewing Profile: Reputation: pameijer