420f00f3

On DVB-T/T2 the EPG just works and shows for all the channels 7 days.

On DVB-C as well, but for DVB-S/S2 on my E2 it's a bit of a challenge.

Some channels show EPG and some don't ...

I have the following set in the EPG Settings:

Show EIT now/next in infobar - [Tick]
Enable EIT EPG  - [Tick]
Enable MHW EPG  - [Tick]
Enable freesat EPG  - [Tick]
Enable ViaSat EPG  - [Tick]
Enable Netmed EPG  - [Tick]
Enable Virgin EPG  - [ ]
Enable OpenTV EPG  - [Tick]
Maintain old EPG data for - 120
Location EPG Cache file -  /media/e8c68464/epg.dat
Full description separator - new line
Replace newlines in EPG - *

What am I doing wrong?

I have so far only found one, TravelXP 4K SID 4603 (11fb) on 13E.
But are there any other channels that transmit in HDR (HDR10, HDR10+, DV, HLG)
on these positions?

Site like KoS
https://en.kingofsat...trahd-13.0E.php
or DB
https://www.digitalb...5&sec=0&lang=en
do not offer the possibility to check which UHD channels transmit in HDR and type ......

Just checked and TSDuck is not in the repos of OpenPLi

opkg list | grep tsduck

root@vuduo4kse:~# uname -a
Linux vuduo4kse 4.1.45-1.17 #1 SMP Sat Sep 10 19:30:52 UTC 2022 armv7l GNU/Linux

Is armv7l = armhf, or it is different architecture?

Is it safe to install the 32bit version for "Raspbian (Raspberry Pi, 32 bits) | tsduck_3.36-3528.raspbian12_armhf.deb"

https://github.com/t...ian12_armhf.deb

or would I need to compile it and if so, would it work?

I prefer to managed / configure devices in command line (not always easy, but I try to learn)

and it's more convenient, then clicking through Menu on the TV, but so far only found

a very limited set of commands and that is:

#To manage packages/plugins via OPKG

opkg --help

opkg list | grep smart

opkg install smartmontools smartmontools-doc

opkg install /tmp/filename.ipk

opkg remove packagename

#To control power state of the BOX

wget -O /dev/null -q http://127.0.0.1/web...tate?newstate=X
where X =
0 = Toogle Standby
1 = Deepstandby
2 = Reboot
3 = Restart Enigma2
4 = Wakeup form Standby
5 = Standby

wget -O /dev/null -q http://127.0.0.1/web...tate?newstate=1
wget -O /dev/null -q http://127.0.0.1/web...tate?newstate=2
wget -O /dev/null -q http://127.0.0.1/web...tate?newstate=3
wget -O /dev/null -q http://127.0.0.1/web...tate?newstate=4
wget -O /dev/null -q http://127.0.0.1/web...tate?newstate=5

#Managing SSH key's here via Dropbear server

https://www.world-of...ll=1#post447298

Is that it?

I would much prefer, if I could Back Up the settings from CLI,

rather then via the RCU/TV.

Same for the tuning, re-scanning the channels and generally managing

the device ........

Can someone please help me to get my box (Vu+ ULTIMO 4K) working with the %sub%?

I have in the "top" slot:

Irdeto PC Card - with "skylink ready" logo and irdeto CI+/cslink irdeto/SECURE PLUS HD @SMIT
Smart Card is Irdeto B.V. | IRDETO 01 | PIN: 0000 | 1 006 xxx xxx x

Just need it to decode back the TV channels as no back up made