By.Bob

I greet your team openpli

At the same time we turn to you asking for advice ..
Type owned satellite receiver VU + Ultimo. Recently here have bought a new DVB-T2, T, C tuner.
Until now I had a second receiver DVB-S2, S tuners. Mounted here to the third DVB-T2, T, c according to the instructions as given in the manual, as it advises manufacturers. In my receiver I have installed the latest version of the image E2 20150125
My problem is as follows:
I did a scan new DVB T tuner. I adjusted to the PC via DREMBOXEDIT new setinng. How I wanted him to send over dremboxedit stb. we are unable to send him, transmission starts, but is interrupted. In dreamedit here to verify name, password ll be fine.
I have a feeling that it does not find the file "lamedb". He asks it since I scan DVB-T2, T, C Tuner ..

It did not help remove the item DVB-T from favorites .. or upload old setting.
Once I've done on the stb. automatic scan for all tuners. How box complete scan and continued scan DVB-T2, T, C tuner, so we do imageE2 Pli "greenhorn" ..
Installed new flash here several times and found here that the DVB-T2, T, C tuner does not understand a known and verified image E2 nor openPLI. About VU + Ultimo do not fit together 2- tuners DVB-S2 and DVB-T2 1, T, C tuners.
Then here uploaded a new image VTI 8.0 and it was the same. Again a new openPLI, to me it looks like a mistake driver..pro new DVB-T2, T, C tuner.
Thanks for your help

Hello
I am the owner Xtrend ET7500HD and I have a problem with tuning on Thor 0.8W directly on freesat.
I have a 120 cm dish and motor. I Global moderator http://forum.techneteuweb.eu
The signal on my dish receiver on the other is 95% but ET7500 signal is only 47% I exchanged LNB and parabola but the problem persists. I replaced setellites.xml and made a new scan channels but the problem is still the same unchanged. At first I thought that this was not a problem Enigma2 and therefore I have tried all the Images for a given receiving ET7500 but the result is a wall. The problem persists.
Another receiver signal 95% on Thor 0.8W at ET7500 47% and it is too little. At 23.5E skylink signal is acceptable but also a little bit weaker but normal.
I am not alone who has the same problem. I informed at independent owners of these receivers Xtrend ET7500HD and have the same problem.
I wonder if it's a problem or a hardware tuner and if I complain receiver or whether developers about how to solve the problem and know the problem.
Furthermore, the problem is that plays classic videos in AVI format. The image is cut, shake and you can not rewind. But this is the problem with most receivers. The big problem is with a tuner and it is a serious problem.
I am aware that it is a novelty, but a problem with the Tuner is a serious and this should be addressed quickly.
Thank you in advance for your answer. Sincerely By.Bob