Jump to content


Photo

BackupSuite

Started by Pedro_Newbie, 02 Jan 2012 15:35

  • Please log in to reply
1308 replies to this topic

Re: BackupSuite #1121 twol

  • Senior Member
  • 448 posts

+15
Neutral

Posted 28 August 2020 - 17:54

Sorr

 

 

Tried to backup now that I've solved the problems with my receiver but notging to do.

In backupsuite.log file I read that:

*** THIS BACKUP IS CREATED WITH THE BACKUPSUITE PLUGIN ***
*****  https://github.com/OpenVisionE2/BackupSuite  ******

Plugin version     = git504+9967f99
Back-up media      = /media/usb
Filesystem                Size      Used Available Use% Mounted on
/dev/sda1                 3.9G     95.4M      3.8G   2% /media/usb

Back-up = 2020.08.28_15:48
Version = openpli 7.3-release 
Flashed = 2020.08.24_01:00
Updated = 2020.08.28_15:47
Drivers = zgemma-dvb-modules-h9combo - 4.4.35-20200720-r0.0
Enigma2 = 2020-08-21-release-7.3


Working directory  = /media/usb/bi
Not Open Vision, OpenPLi or SatDreamGr maybe?
Non è stato trovato nessun ricevitore supportato!
Creazione dell'immagine FALLITA!

No supported receiver was found

But I read also:

 

Not Open Vision, OpenPLi or SatDreamGr maybe?

 

I'm confused... the problem is the image or the receiver? And if is the image... I read that OpenPLi should be supported :huh:

 

There's no code in Backup Suite to block the plugin from running on other images, that message tells you're using an image which isn't OV so the check files are different.

 

The old generation of Backup Suite uses hard-coded values and pre-defined tables to detect your model so seems it can't detect your model and I think it's because of the new drivers which ruined almost every check, example: https://github.com/E...83c924c422116e5

 

So don't blame me as there's no single reliable company in enigma2 scene with APIs and drivers.

 

The reason we have our own model detection in Open Vision is exactly that we don't care what companies advertise as model name, we do what we think is better for all of our sources.

 

Regards,

Persian Prince

 

When I think of how many receivers both OpenATV & OpenViX backup with their (different) image backup software I find it difficult to understand your point of view


Gigablue Quad 4K & UE 4K, Vu+Uno4KSE, DM900
.........FBC Tuners:
------------------> GT-SAT unicable lnb to 1.5M dish(28.2E)
------------------> Gigablue unicable lnb to 80 cm dish(19.2E)

Octagon sf8008, AX HD61, Edision Osmio 4K+, Zgemma H9Combo using Legacy ports on multiswitches
Zgemma H9twin & Zgemma H9 C/S mode into Giga4K
 

Re: BackupSuite #1122 Persian Prince

  • Senior Member
  • 1,982 posts

+247
Excellent

Posted 28 August 2020 - 18:15

Sorr

 

 

Tried to backup now that I've solved the problems with my receiver but notging to do.

In backupsuite.log file I read that:

*** THIS BACKUP IS CREATED WITH THE BACKUPSUITE PLUGIN ***
*****  https://github.com/OpenVisionE2/BackupSuite  ******

Plugin version     = git504+9967f99
Back-up media      = /media/usb
Filesystem                Size      Used Available Use% Mounted on
/dev/sda1                 3.9G     95.4M      3.8G   2% /media/usb

Back-up = 2020.08.28_15:48
Version = openpli 7.3-release 
Flashed = 2020.08.24_01:00
Updated = 2020.08.28_15:47
Drivers = zgemma-dvb-modules-h9combo - 4.4.35-20200720-r0.0
Enigma2 = 2020-08-21-release-7.3


Working directory  = /media/usb/bi
Not Open Vision, OpenPLi or SatDreamGr maybe?
Non è stato trovato nessun ricevitore supportato!
Creazione dell'immagine FALLITA!

No supported receiver was found

But I read also:

 

Not Open Vision, OpenPLi or SatDreamGr maybe?

 

I'm confused... the problem is the image or the receiver? And if is the image... I read that OpenPLi should be supported :huh:

 

There's no code in Backup Suite to block the plugin from running on other images, that message tells you're using an image which isn't OV so the check files are different.

 

The old generation of Backup Suite uses hard-coded values and pre-defined tables to detect your model so seems it can't detect your model and I think it's because of the new drivers which ruined almost every check, example: https://github.com/E...83c924c422116e5

 

So don't blame me as there's no single reliable company in enigma2 scene with APIs and drivers.

 

The reason we have our own model detection in Open Vision is exactly that we don't care what companies advertise as model name, we do what we think is better for all of our sources.

 

Regards,

Persian Prince

 

When I think of how many receivers both OpenATV & OpenViX backup with their (different) image backup software I find it difficult to understand your point of view

 

What's the relation between my post and ViX or ATV?

 

I have no intention to support those images and they have their own backup tools, there are some similarities between Open Vision and SatDreamGr because of the PLi's enigma2 and also our OEs which are not similar to OE-A

 

Did you even read the above posts? Some users want to run old generation of Backup Suite on hardwares with new drivers and their box won't get detected so how is it related to ViX or ATV?

 

I'm getting tired of seeing posts getting captured to mention OE-A images are better in everyway, ok they're better so good for you.


Edited by Persian Prince, 28 August 2020 - 18:19.

Open Vision sources: https://github.com/OpenVisionE2

Re: BackupSuite #1123 ccs

  • Senior Member
  • 229 posts

+7
Neutral

Posted 28 August 2020 - 18:35

What's the relation between my post and ViX or ATV?

 

 

 

 

None, just that ViX and ATV provide backup support for all the boxes they build images for, you appear to be more selective.


test

Re: BackupSuite #1124 Persian Prince

  • Senior Member
  • 1,982 posts

+247
Excellent

Posted 28 August 2020 - 18:43

 

What's the relation between my post and ViX or ATV?

 

 

 

 

None, just that ViX and ATV provide backup support for all the boxes they build images for, you appear to be more selective.

 

Backup Suite in Open Vision supports everything except SH4 architecture (which is not yet implemented) so there's no exception in our images.

 

It's not my duty to support other images, I'm not a PLi member and I didn't break the plugin to not detect what was ok before so ask for help from the one who broke it.


Edited by Persian Prince, 28 August 2020 - 18:44.

Open Vision sources: https://github.com/OpenVisionE2

Re: BackupSuite #1125 WanWizard

  • PLi® Core member
  • 70,204 posts

+1,798
Excellent

Posted 28 August 2020 - 19:04

Not sure anyone broke it, the H9 Combo and H9 Twin are new boxes in OpenPLi 7.3.


Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)

Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.

Many answers to your question can be found in our new and improved wiki.

Re: BackupSuite #1126 staripper

  • Senior Member
  • 36 posts

0
Neutral

Posted 29 September 2020 - 10:30

Hello,

 

I have Zgemma  H9.2H and BackupSuite stopped working !

 

*** THIS BACKUP IS CREATED WITH THE BACKUPSUITE PLUGIN ***
 
Plugin version     = git504+9967f99
Back-up media      = /media/hdd
Filesystem                Size      Used Available Use% Mounted on
/dev/sda4                 1.8T      1.1T    586.0G  66% /media/hdd
 
Back-up = 2020.09.29_12:15
Version = openpli 7.3-release 
Flashed = 2020.02.10_01:28
Updated = 2020.09.28_22:28
Drivers = zgemma-dvb-modules-h9 - 4.4.35-20200720-r0.0
Enigma2 = 2020-08-29-release-7.3
 
 
Working directory  = /media/hdd/bi
Not Open Vision, OpenPLi or SatDreamGr maybe?
No supported receiver found!
Image creation FAILED!

Re: BackupSuite #1127 Kaizoku

  • Senior Member
  • 65 posts

+6
Neutral

Posted 29 September 2020 - 11:29

I think Pli team should take the direction of oe-a and have their own backup included in image, its never a good idea to rely on someone doing the job you are supposed to do.

Re: BackupSuite #1128 WanWizard

  • PLi® Core member
  • 70,204 posts

+1,798
Excellent

Posted 29 September 2020 - 11:42

If you can provide us with the people to do all that extra work?

 

Besides that, what exactly is the point of a full backup? None of us ever use it. So there isn't much incentive to spend time on it.


Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)

Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.

Many answers to your question can be found in our new and improved wiki.

Re: BackupSuite #1129 fatnasa

  • Senior Member
  • 68 posts

0
Neutral

Posted 29 September 2020 - 23:09

@WanWizard

 

Would you please explain in details  , what is the best way to backup current working configuration ? and how to restore it in case of failure  for any reason

 

thanks in advance.


Currently in use: VU+ Duo2 , Zgemma H9.2H

Re: BackupSuite #1130 Dimmie

  • Senior Member
  • 2,338 posts

+33
Good

Posted 29 September 2020 - 23:31

what exactly is the point of a full backup? None of us ever use it. So there isn't much incentive to spend time on it.

I use this for years now, and also know others that use this for years.

 

So for me it would be highly appriciated when the backupsuite plugin also works after performing a software update in the OpenPLI image.


Re: BackupSuite #1131 WanWizard

  • PLi® Core member
  • 70,204 posts

+1,798
Excellent

Posted 29 September 2020 - 23:54

Would you please explain in details  , what is the best way to backup current working configuration ? and how to restore it in case of failure  for any reason

 

Configure autobackup, and have it make a backup of external storage (disk, usb). Restore is a matter of flashing, the backup will be automatically restored after a flash.

 

( this does not restore ipks that where installed manually, but those can be placed in the backup manually )
 


Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)

Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.

Many answers to your question can be found in our new and improved wiki.

Re: BackupSuite #1132 WanWizard

  • PLi® Core member
  • 70,204 posts

+1,798
Excellent

Posted 29 September 2020 - 23:55

So for me it would be highly appriciated when the backupsuite plugin also works after performing a software update in the OpenPLI image.

 

We're not going to maintain a fork, volunteers welcome.


Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)

Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.

Many answers to your question can be found in our new and improved wiki.

Re: BackupSuite #1133 rantanplan

  • PLi® Contributor
  • 1,857 posts

+87
Good

Posted 30 September 2020 - 16:04

https://github.com/O...ckupsuite.bb#L7

 

default branch is the "develop" and I think that the 'master' branch should be fixed for pli.

 

as already happened in develop

https://github.com/O...ckupsuite.bb#L7


Edited by rantanplan, 30 September 2020 - 16:07.

Re: BackupSuite #1134 WanWizard

  • PLi® Core member
  • 70,204 posts

+1,798
Excellent

Posted 30 September 2020 - 17:19

I think there are no developments in that master branch anymore?


Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)

Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.

Many answers to your question can be found in our new and improved wiki.

Re: BackupSuite #1135 rantanplan

  • PLi® Contributor
  • 1,857 posts

+87
Good

Posted 30 September 2020 - 17:25

Readme develop

https://github.com/O...velop/README.md

Readme master

https://github.com/O...aster/README.md

In the develop PP has adjusted the 'api' things regarding OpenVision.
Therefore it doesn't work for other images.
That's why he changed OpenpliCore develop via pullrequest


Re: BackupSuite #1136 WanWizard

  • PLi® Core member
  • 70,204 posts

+1,798
Excellent

Posted 30 September 2020 - 17:29

If there aren't any required changed in develop that are not in master, I'll backport it for the next release update.

 

Thanks for looking into it.


Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)

Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.

Many answers to your question can be found in our new and improved wiki.

Re: BackupSuite #1137 rantanplan

  • PLi® Contributor
  • 1,857 posts

+87
Good

Posted 30 September 2020 - 17:31

I know it's all a bit crazy because of 'devlop' here and 'master' there, but I think that's exactly the problem in 7.3 right now.


Re: BackupSuite #1138 WanWizard

  • PLi® Core member
  • 70,204 posts

+1,798
Excellent

Posted 30 September 2020 - 17:36

Just backported it. I've started a manual build for the h9.


Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)

Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.

Many answers to your question can be found in our new and improved wiki.

Re: BackupSuite #1139 Persian Prince

  • Senior Member
  • 1,982 posts

+247
Excellent

Posted 30 September 2020 - 19:43

No need for a fork, master branch is for PLi and I just invited you @WanWizard to have write access :)

 

Recent driver changes from Zgemma broke the support I think so you could investigate the new box names presented by Zgemma.

 

develop branch won't work for any other image as we have unique files in Open Vision.


Edited by Persian Prince, 30 September 2020 - 19:45.

Open Vision sources: https://github.com/OpenVisionE2

Re: BackupSuite #1140 WanWizard

  • PLi® Core member
  • 70,204 posts

+1,798
Excellent

Posted 30 September 2020 - 19:55

Invitation accepted. ;)

 

zgemma broke a lot by changing their box names, We needed to adapt code as well.


Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)

Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.

Many answers to your question can be found in our new and improved wiki.

Back to [EN] Enduser support

22 user(s) are reading this topic

0 members, 22 guests, 0 anonymous users

  1. Forums
  2. → PLi® Support
  3. → [EN] Enduser support