Updated Slovak translation (last one I found here was from Aug. 2015). It is still not complete, but I'll try to continue translating it...
Translations for Enigma 2: Please post them here!
Re: Translations for Enigma 2: Please post them here! #1121
Re: Translations for Enigma 2: Please post them here! #1122
Re: Translations for Enigma 2: Please post them here! #1123
Posted 18 April 2016 - 08:45
This thread is about translation for the main core of OpenPLi, for the external plugins please provide the translation in a dedicated post or contact the author and propose your translations for his plugin.
NO SUPPORT by PM, it is a forum make your question public so everybody can benefit from the question/answer.
If you think that my answer helps you, you can press the up arrow in bottom right of the answer.
Wanna help with OpenPLi Translation? Please read our Wiki Information for translators
Sat: Hotbird 13.0E, Astra 19.2E, Eutelsat5A 5.0W
VU+ Solo 4K: 2*DVB-S2 + 2*DVB-C/T/T2 (used in DVB-C) & Duo 4K: 2*DVB-S2X + DVB-C (FBC)
AB-Com: PULSe 4K 1*DVB-S2X (+ DVB-C/T/T2)
Edision OS Mio 4K: 1*DVB-S2X + 1*DVB-C/T/T2
Re: Translations for Enigma 2: Please post them here! #1124
Posted 18 April 2016 - 09:45
This plugin comes with an OpenPLI image for the receivers Formuler F3 and is not in the OpenPLI image of his own localization.
If you put in a folder with the plugin required files for localization, the localization does not occur.
Make it possible to localize, I will open a separate branch and lay out to the localization file.
Edited by !wow!, 18 April 2016 - 09:48.
Re: Translations for Enigma 2: Please post them here! #1125
Re: Translations for Enigma 2: Please post them here! #1126
Posted 23 April 2016 - 16:59
Already pushed by Littlesat
Aan de rand van de afgrond is een stap voorwaarts niet altijd vooruitgang....
On the edge of the abyss, a step forward is not always progress....
Hardware: 2x Daily used Vu+ Ultimo 4K - Vu+ Duo 4K SE and a lot more.... - VisioSat BiBigsat - Jultec Unicable Multiswitch 4 positions: 19.2/23.5/28.2 East - Diseqc motorized flatdish antenna
Software : HomeBuild OpenPLi Develop and Scarthgap builds, local cards driven by OsCam
Press the button on the buttom right of this message
Have you tried our wiki yet? Many answers can be found in our OpenPLi wiki
Re: Translations for Enigma 2: Please post them here! #1127
Posted 28 April 2016 - 13:24
Hi,
2016-04-28: fr.po and enigma2.pot
Regards,
Pr2
Attached Files
NO SUPPORT by PM, it is a forum make your question public so everybody can benefit from the question/answer.
If you think that my answer helps you, you can press the up arrow in bottom right of the answer.
Wanna help with OpenPLi Translation? Please read our Wiki Information for translators
Sat: Hotbird 13.0E, Astra 19.2E, Eutelsat5A 5.0W
VU+ Solo 4K: 2*DVB-S2 + 2*DVB-C/T/T2 (used in DVB-C) & Duo 4K: 2*DVB-S2X + DVB-C (FBC)
AB-Com: PULSe 4K 1*DVB-S2X (+ DVB-C/T/T2)
Edision OS Mio 4K: 1*DVB-S2X + 1*DVB-C/T/T2
Re: Translations for Enigma 2: Please post them here! #1128
Re: Translations for Enigma 2: Please post them here! #1129
Posted 29 April 2016 - 07:40
Commited both French and Greek translations, thanks for the commitment
Aan de rand van de afgrond is een stap voorwaarts niet altijd vooruitgang....
On the edge of the abyss, a step forward is not always progress....
Hardware: 2x Daily used Vu+ Ultimo 4K - Vu+ Duo 4K SE and a lot more.... - VisioSat BiBigsat - Jultec Unicable Multiswitch 4 positions: 19.2/23.5/28.2 East - Diseqc motorized flatdish antenna
Software : HomeBuild OpenPLi Develop and Scarthgap builds, local cards driven by OsCam
Press the button on the buttom right of this message
Have you tried our wiki yet? Many answers can be found in our OpenPLi wiki
Re: Translations for Enigma 2: Please post them here! #1130
Re: Translations for Enigma 2: Please post them here! #1131
Posted 10 May 2016 - 14:54
Updated Lithuanian translation from Pr2 given 2016-04-28 .pot
Pushed.
Aan de rand van de afgrond is een stap voorwaarts niet altijd vooruitgang....
On the edge of the abyss, a step forward is not always progress....
Hardware: 2x Daily used Vu+ Ultimo 4K - Vu+ Duo 4K SE and a lot more.... - VisioSat BiBigsat - Jultec Unicable Multiswitch 4 positions: 19.2/23.5/28.2 East - Diseqc motorized flatdish antenna
Software : HomeBuild OpenPLi Develop and Scarthgap builds, local cards driven by OsCam
Press the button on the buttom right of this message
Have you tried our wiki yet? Many answers can be found in our OpenPLi wiki
Re: Translations for Enigma 2: Please post them here! #1132
Posted 23 May 2016 - 19:05
Hi,
As usual.
2016-05-23: fr.po and enigma2.pot
Regards,
Pr2
Attached Files
NO SUPPORT by PM, it is a forum make your question public so everybody can benefit from the question/answer.
If you think that my answer helps you, you can press the up arrow in bottom right of the answer.
Wanna help with OpenPLi Translation? Please read our Wiki Information for translators
Sat: Hotbird 13.0E, Astra 19.2E, Eutelsat5A 5.0W
VU+ Solo 4K: 2*DVB-S2 + 2*DVB-C/T/T2 (used in DVB-C) & Duo 4K: 2*DVB-S2X + DVB-C (FBC)
AB-Com: PULSe 4K 1*DVB-S2X (+ DVB-C/T/T2)
Edision OS Mio 4K: 1*DVB-S2X + 1*DVB-C/T/T2
Re: Translations for Enigma 2: Please post them here! #1133
Re: Translations for Enigma 2: Please post them here! #1134
Re: Translations for Enigma 2: Please post them here! #1135
Posted 28 May 2016 - 08:03
Hi,
As usual.
2016-05-23: fr.po and enigma2.pot
Regards,
Pr2
Hi.
Norwegian nb update with the latest strings. Thanks to Pr2.
Please update.
Thank you.
Thanks to Pr2 for pot file.
I have a question - do you translate all the strings, which are the same, like En? eg. LNB, or %H:%M, or digits (0, 1, 2...)? With them mo file becomes larger and occupies more memory
Pushed them all.
Aan de rand van de afgrond is een stap voorwaarts niet altijd vooruitgang....
On the edge of the abyss, a step forward is not always progress....
Hardware: 2x Daily used Vu+ Ultimo 4K - Vu+ Duo 4K SE and a lot more.... - VisioSat BiBigsat - Jultec Unicable Multiswitch 4 positions: 19.2/23.5/28.2 East - Diseqc motorized flatdish antenna
Software : HomeBuild OpenPLi Develop and Scarthgap builds, local cards driven by OsCam
Press the button on the buttom right of this message
Have you tried our wiki yet? Many answers can be found in our OpenPLi wiki
Re: Translations for Enigma 2: Please post them here! #1136
Posted 28 May 2016 - 12:45
Thanks to Pr2 for pot file.
I have a question - do you translate all the strings, which are the same, like En? eg. LNB, or %H:%M, or digits (0, 1, 2...)? With them mo file becomes larger and occupies more memory
Hi,
Personally I do, because then it is really easy for me to see only the newly added strings that needs to be translated, otherwise you will always saw those "common" strings and have to look up closely between them which strings are newly added. So my translation are always at 100%. And this is only a few bytes more in the .mo file that doesn't really arm, moreover during OpenPLi installation you can decide to delete all the language files that you don't need.
@Tech,
Many thanks!
Pr2
Edited by Pr2, 28 May 2016 - 12:45.
NO SUPPORT by PM, it is a forum make your question public so everybody can benefit from the question/answer.
If you think that my answer helps you, you can press the up arrow in bottom right of the answer.
Wanna help with OpenPLi Translation? Please read our Wiki Information for translators
Sat: Hotbird 13.0E, Astra 19.2E, Eutelsat5A 5.0W
VU+ Solo 4K: 2*DVB-S2 + 2*DVB-C/T/T2 (used in DVB-C) & Duo 4K: 2*DVB-S2X + DVB-C (FBC)
AB-Com: PULSe 4K 1*DVB-S2X (+ DVB-C/T/T2)
Edision OS Mio 4K: 1*DVB-S2X + 1*DVB-C/T/T2
Re: Translations for Enigma 2: Please post them here! #1137
Re: Translations for Enigma 2: Please post them here! #1138
Posted 1 June 2016 - 11:35
Note it does break build off enigma2.plugins .
since commit :
https://github.com/O...5d006dfdf0a0236
Re: Translations for Enigma 2: Please post them here! #1139
Posted 1 June 2016 - 11:45
also the pli server did not build the last recipes since this has been merged 17 hours ago :
https://github.com/O...296223c25df7a4a
Re: Translations for Enigma 2: Please post them here! #1140
14 user(s) are reading this topic
0 members, 14 guests, 0 anonymous users