De vraag is nu: Waarom helpt het?
Willy
Vastlopers van VU Duo + sinds kernel en software update!
Started by Wijkkie, 06 Feb 2012 01:03
1176 replies to this topic
Re: Vastlopers van VU Duo + sinds kernel en software update! #101
-
- Rytec EPG Team
- 17,369 posts
+657
Excellent
Posted 14 February 2012 - 13:59
~~Rytec Team~~
Maxytec Multibox SE OpenPli (used as mediaplayer)
Mutant HD2400 OpenPli
Vu+ Duo OpenPli (backup)
Synology NAS
Sat: 13E, 19.2E, 23.5E and 28.2E
*Pli/Rytec EPG POWERED*
Re: Vastlopers van VU Duo + sinds kernel en software update! #102
-
- Senior Member
- 7,766 posts
+184
Excellent
Posted 14 February 2012 - 14:04
Vanwege die meldingen dat ook geprobeerd: helpt geen snars.Installeren van swap file helpt.
Ik heb dit al eens gesuggeerd: Installeren van een swap file schijnt te helpen.
Ik heb dat nu een maand en ik heb geen problemen meer gehad.
En ook CCcam terug naar 2.1 was niet de oplossing, hoewel de box wel ineens 4 dagen gedraaid heeft (liep 'normaal' zo'n tweemaal per dag vast).
Re: Vastlopers van VU Duo + sinds kernel en software update! #103
-
- Senior Member
- 508 posts
+6
Neutral
Posted 14 February 2012 - 14:50
Alstublieft..
[list]
[*]
[/list]If you have any inquiry regarding Vu+ products, please send an email with the address below.
[/left][list]
[*]Sales: sales@vuplus.com
[*]Suggestion or bug report: support@vuplus.com
[/list]
Daar stuur je de klachten heen
Re: Vastlopers van VU Duo + sinds kernel en software update! #104
-
- PLi® Core member
- 32,766 posts
+245
Excellent
Posted 14 February 2012 - 19:04
De vraag is nu: Waarom helpt het?
Willy
Vermoedelijk ergens een memory leak in de drivers.
Met een swapfile hou je het zo veel langer vol.
Re: Vastlopers van VU Duo + sinds kernel en software update! #105
-
- Senior Member
- 508 posts
+6
Neutral
Posted 14 February 2012 - 20:53
Mijn ervaring is dat het vastlopen eerder of makkelijker lijkt te gebeuren als er meerdere processen draaien.
Zoals gister bij mij, zoeken in een bouquet terwijl er een opname draait die met CCcam wordt gedecodeerd.
Dus er draaien dan feitenlijk 2 tuners die beide gedecodeerd worden tegelijk.
Daarnaast vraag je met het doorzoeken van een bouquet ook nog van alles op.
zou in zo'n situatie een swapfile dan behulpzaam zijn als er sprake is van een memory leak?
Zoals gister bij mij, zoeken in een bouquet terwijl er een opname draait die met CCcam wordt gedecodeerd.
Dus er draaien dan feitenlijk 2 tuners die beide gedecodeerd worden tegelijk.
Daarnaast vraag je met het doorzoeken van een bouquet ook nog van alles op.
zou in zo'n situatie een swapfile dan behulpzaam zijn als er sprake is van een memory leak?
Re: Vastlopers van VU Duo + sinds kernel en software update! #106
-
- Rytec EPG Team
- 1,082 posts
+22
Neutral
Posted 14 February 2012 - 20:54
ik startte net een opname manueel, ik ging daarna naar een andere zender op tuner B en hopla, weer de tandwielen in beeld met als gevolg VU+duo in het display en een enigma herstart.
en geen crashlog te vinden.
openpli versie 2.1 en kernel versie 3.1.1 12/02/2012 en oscam 6388
en geen crashlog te vinden.
openpli versie 2.1 en kernel versie 3.1.1 12/02/2012 en oscam 6388
Edited by rytec, 14 February 2012 - 20:56.
~~Rytec Team~~ VU Ultimo / VU Uno / VU Solo / Panasonic TH42-PV700 *Pli/Rytec EPG POWERED*
Re: Vastlopers van VU Duo + sinds kernel en software update! #107
-
- Senior Member
- 4,631 posts
+225
Excellent
Posted 14 February 2012 - 21:06
Als experiment heb ik nu weer ge-update naar de stand van vandaag maar heb daar de eerste kernel 3.1.1. drivers in gekopieerd, die van 22-12-2011, eens kijken wat dat voor verschijnselen gaat vertonen
Re: Vastlopers van VU Duo + sinds kernel en software update! #108
-
- PLi® Core member
- 46,969 posts
+541
Excellent
Posted 14 February 2012 - 21:07
Wat heel belangrijk is, is onderscheid maken tussen een box / linux kernel die is gecrasht (ging ping meer), of enigma die crasht. In het eerste geval is er een hardware of een driver probleem, kan niet anders. In het tweede geval kan er een probleem met enigma, een plugin, enz. zijn. Als enigma crasht zonder crashlog, dan kan het een randgevalletje zijn, dan gaarne even inloggen en "dmesg" intypen en hier neerzetten.
* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.
Re: Vastlopers van VU Duo + sinds kernel en software update! #109
-
- Senior Member
- 4,631 posts
+225
Excellent
Posted 14 February 2012 - 21:16
De keren dat ik een "vastloper" constateerde stond die ook echt vast, in standby en geen ;leevn in te krijgen, ook via telnet geen enkele communicatie mogelijk dus dat maakt het er allemaal niet makkelijker op.
Vandaar dat ik gewoon eens voor de lol het probeer met de oude drivers, het blijft natuurlijk weinig wetenschappelijk aangezien de vastlopers met de huidige image en drivers aan deze zijde nou ook niet heel frequent waren.
Misschien kan iemand die echt dagelijks vastlopers heeft ditzelfde proberen, niet dat het iets oplost en het kan bijna niet anders als de drivers zijn maar dan weten we misschien iets meer.
Vandaar dat ik gewoon eens voor de lol het probeer met de oude drivers, het blijft natuurlijk weinig wetenschappelijk aangezien de vastlopers met de huidige image en drivers aan deze zijde nou ook niet heel frequent waren.
Misschien kan iemand die echt dagelijks vastlopers heeft ditzelfde proberen, niet dat het iets oplost en het kan bijna niet anders als de drivers zijn maar dan weten we misschien iets meer.
Re: Vastlopers van VU Duo + sinds kernel en software update! #110
-
- Rytec EPG Team
- 1,082 posts
+22
Neutral
Posted 14 February 2012 - 21:26
hier de dmesg info:
AUD]: AUDIO_STOP 1
[AUD]: AUDIO_CONTINUE 1 0 audio pid_hndl : 0x0
[AUD]: AUDIO_CONTINUE:bcm7335->audio_pid_hndl is null 0 0
================= FAN is OFF ==============================
[AUD]: AUDIO_SET_MUTE 0
FE tune
dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
[AUD]: AUDIO_SET_BYPASS_MODE 1
[AUD]: proc_get_ac3 1 audio_passthrough_spdif : 0
[AUD]: AUDIO_PAUSE 1
[AUD]: AUDIO_PLAY 1 decoder start : 0
[AUD]: AUDIO_CONTINUE 1 1 audio pid_hndl : 0xc0b35fcc
[AUD]: setting mute : 0
[VID]: VIDEO_SELECT_SOURCE 1
[VID]: VIDEO_SET_STREAMTYPE 0
[VID]: VIDEO_PLAY 0 2 0
[VID]: VIDEO_CONTINUE 0 1
[VID]: VIDEO_CLEAR_BUFFER 0 1 0
dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
[AUD]: AUDIO_CONTINUE 1 1 audio pid_hndl : 0xc0b35fcc
[AUD]: setting mute : 0
[VID]: VIDEO_SELECT_SOURCE 1
[VID]: VIDEO_SET_STREAMTYPE 0
[VID]: VIDEO_PLAY 0 2 1
[VID]: VIDEO_CONTINUE 0 1
[VID]: VIDEO_CLEAR_BUFFER 0 1 0
[VID]: VIDEO_STOP 0 1
[VID]: VIDEO_SELECT_SOURCE 0
[AUD]: AUDIO_STOP 1
[AUD]: AUDIO_CONTINUE 1 0 audio pid_hndl : 0x0
[AUD]: AUDIO_CONTINUE:bcm7335->audio_pid_hndl is null 0 0
================= FAN is OFF ==============================
[AUD]: AUDIO_SET_MUTE 0
FE tune
dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
[AUD]: AUDIO_SET_BYPASS_MODE 1
[AUD]: proc_get_ac3 1 audio_passthrough_spdif : 0
[AUD]: AUDIO_PAUSE 1
[AUD]: AUDIO_PLAY 1 decoder start : 0
[AUD]: AUDIO_CONTINUE 1 1 audio pid_hndl : 0xc0b35fcc
[AUD]: setting mute : 0
[VID]: VIDEO_SELECT_SOURCE 1
[VID]: VIDEO_SET_STREAMTYPE 0
[VID]: VIDEO_PLAY 0 2 0
[VID]: VIDEO_CONTINUE 0 1
[VID]: VIDEO_CLEAR_BUFFER 0 1 0
dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
[AUD]: AUDIO_CONTINUE 1 1 audio pid_hndl : 0xc0b35fcc
[AUD]: setting mute : 0
[VID]: VIDEO_SELECT_SOURCE 1
[VID]: VIDEO_SET_STREAMTYPE 0
[VID]: VIDEO_PLAY 0 2 1
[VID]: VIDEO_CONTINUE 0 1
[VID]: VIDEO_CLEAR_BUFFER 0 1 0
[VID]: VIDEO_STOP 0 1
[VID]: VIDEO_SELECT_SOURCE 0
[AUD]: AUDIO_STOP 1
[AUD]: AUDIO_CONTINUE 1 0 audio pid_hndl : 0x0
[AUD]: AUDIO_CONTINUE:bcm7335->audio_pid_hndl is null 0 0
================= FAN is OFF ==============================
FE tune
[AUD]: AUDIO_SET_MUTE 0
FE tune
dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
[AUD]: AUDIO_SET_BYPASS_MODE 1
[AUD]: proc_get_ac3 1 audio_passthrough_spdif : 0
[AUD]: AUDIO_PAUSE 1
[AUD]: AUDIO_PLAY 1 decoder start : 0
[AUD]: AUDIO_CONTINUE 1 1 audio pid_hndl : 0xc0b361ac
[AUD]: setting mute : 0
[VID]: VIDEO_SELECT_SOURCE 1
[VID]: VIDEO_SET_STREAMTYPE 0
[VID]: VIDEO_PLAY 0 2 0
[VID]: VIDEO_CONTINUE 0 1
[VID]: VIDEO_CLEAR_BUFFER 0 1 0
[VID]: VIDEO_STOP 0 1
[VID]: VIDEO_SELECT_SOURCE 0
dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
[AUD]: AUDIO_CONTINUE 1 1 audio pid_hndl : 0xc0b361ac
[AUD]: setting mute : 0
[VID]: VIDEO_SELECT_SOURCE 1
[VID]: VIDEO_SET_STREAMTYPE 0
[VID]: VIDEO_PLAY 0 2 0
[VID]: VIDEO_CONTINUE 0 1
[VID]: VIDEO_CLEAR_BUFFER 0 1 0
[VID]: VIDEO_STOP 0 1
[VID]: VIDEO_SELECT_SOURCE 0
[AUD]: AUDIO_STOP 1
[AUD]: AUDIO_CONTINUE 1 0 audio pid_hndl : 0x0
[AUD]: AUDIO_CONTINUE:bcm7335->audio_pid_hndl is null 0 0
bcm7335: hotplug_callback():
Hotplug - status.connected 1
bcm7335: hotplug_callback():
Hotplug - connecting HDMI to display 0xf
FE tune
[AUD]: AUDIO_SET_BYPASS_MODE 1
[AUD]: proc_get_ac3 1 audio_passthrough_spdif : 0
[AUD]: AUDIO_PAUSE 1
[AUD]: AUDIO_PLAY 1 decoder start : 0
[VID]: VIDEO_SET_STREAMTYPE 1
[VID]: VIDEO_FREEZE 1 0
[VID]: VIDEO_PLAY 1 5 2
[VID]: VIDEO_SLOWMOTION 0 1
[VID]: VIDEO_FAST_FORWARD 0 1
[VID]: VIDEO_CONTINUE 1 1
[AUD]: AUDIO_CONTINUE 1 1 audio pid_hndl : 0xc0b3620c
[AUD]: setting mute : 0
[VID]: VIDEO_GET_SIZE src w: 1280 h:720 display w:1280 h:720
[VID]: VIDEO_GET_SIZE aspect: 1 6
[VID]: VIDEO_STOP 1 1
[AUD]: AUDIO_STOP 1
[AUD]: AUDIO_CONTINUE 1 0 audio pid_hndl : 0x0
[AUD]: AUDIO_CONTINUE:bcm7335->audio_pid_hndl is null 0 0
[AUD]: AUDIO_SET_BYPASS_MODE 1
[AUD]: proc_get_ac3 1 audio_passthrough_spdif : 0
[AUD]: AUDIO_PAUSE 1
[AUD]: AUDIO_PLAY 1 decoder start : 0
[VID]: VIDEO_SET_STREAMTYPE 1
[VID]: VIDEO_FREEZE 1 0
[VID]: VIDEO_PLAY 1 5 2
[VID]: VIDEO_SLOWMOTION 0 1
[VID]: VIDEO_FAST_FORWARD 0 1
[VID]: VIDEO_CONTINUE 1 1
[AUD]: AUDIO_CONTINUE 1 1 audio pid_hndl : 0xc0b361dc
[AUD]: setting mute : 0
[VID]: VIDEO_GET_SIZE src w: 0 h:0 display w:0 h:0
[VID]: VIDEO_GET_SIZE aspect: 1 0
[VID]: VIDEO_STOP 1 1
[AUD]: AUDIO_STOP 1
[AUD]: AUDIO_CONTINUE 1 0 audio pid_hndl : 0x0
[AUD]: AUDIO_CONTINUE:bcm7335->audio_pid_hndl is null 0 0
FE tune
[AUD]: AUDIO_SET_BYPASS_MODE 1
[AUD]: proc_get_ac3 1 audio_passthrough_spdif : 0
[AUD]: AUDIO_PAUSE 1
[AUD]: AUDIO_PLAY 1 decoder start : 0
[VID]: VIDEO_SET_STREAMTYPE 1
[VID]: VIDEO_FREEZE 1 0
[VID]: VIDEO_PLAY 1 5 2
[VID]: VIDEO_SLOWMOTION 0 1
[VID]: VIDEO_FAST_FORWARD 0 1
[VID]: VIDEO_CONTINUE 1 1
[AUD]: AUDIO_CONTINUE 1 1 audio pid_hndl : 0xc0b3602c
[AUD]: setting mute : 0
[VID]: VIDEO_GET_SIZE src w: 0 h:0 display w:0 h:0
[VID]: VIDEO_GET_SIZE aspect: 1 0
[VID]: VIDEO_STOP 1 1
[AUD]: AUDIO_STOP 1
[AUD]: AUDIO_CONTINUE 1 0 audio pid_hndl : 0x0
[AUD]: AUDIO_CONTINUE:bcm7335->audio_pid_hndl is null 0 0
FE tune
[AUD]: AUDIO_SET_BYPASS_MODE 1
[AUD]: proc_get_ac3 1 audio_passthrough_spdif : 0
[AUD]: AUDIO_PAUSE 1
[AUD]: AUDIO_PLAY 1 decoder start : 0
enigma2 invoked oom-killer: gfp_mask=0xd0, order=3, oom_adj=0, oom_score_adj=0
Call Trace:
[<8056a0bc>] dump_stack+0x8/0x34
[<80087f34>] T.557+0x88/0x1ac
[<800881c0>] T.556+0x168/0x3a8
[<80088654>] out_of_memory+0x254/0x460
[<8008cf74>] __alloc_pages_nodemask+0x664/0x678
[<800beb84>] cache_alloc_refill+0x3d4/0x6d4
[<800befd8>] __kmalloc+0x154/0x15c
[<c07be900>] BRAP_FWIF_P_GenerateCitInput+0x7c/0x2308 [dvb_bcm7335]
[<c07b9fe8>] BRAP_DSPCHN_P_Start+0x920/0x1894 [dvb_bcm7335]
[<c07dead0>] BRAP_P_StartDecPath+0x3cc/0x47c [dvb_bcm7335]
[<c07a8c64>] BRAP_StartChannel+0x6cc/0x784 [dvb_bcm7335]
[<c084d764>] NEXUS_AudioDecoder_P_Start+0x750/0x97c [dvb_bcm7335]
[<c084defc>] NEXUS_AudioDecoder_Start_impl+0x56c/0x6a8 [dvb_bcm7335]
[<c0743f30>] NEXUS_AudioDecoder_Start+0x30/0x50 [dvb_bcm7335]
[<c0706f98>] bcm7335_audio_ioctl+0x5a4/0x122c [dvb_bcm7335]
[<803ee26c>] dvb_usercopy+0x124/0x204
[<800d6504>] do_vfs_ioctl+0xa0/0x6c0
[<800d6b68>] sys_ioctl+0x44/0xa8
[<8000e9fc>] stack_done+0x20/0x40
Mem-Info:
Normal per-cpu:
CPU 0: hi: 90, btch: 15 usd: 8
CPU 1: hi: 90, btch: 15 usd: 76
active_anon:23307 inactive_anon:106 isolated_anon:0
active_file:13 inactive_file:41 isolated_file:0
unevictable:0 dirty:0 writeback:0 unstable:0
free:4549 slab_reclaimable:587 slab_unreclaimable:2141
mapped:122 shmem:240 pagetables:130 bounce:0
Normal free:18196kB min:2036kB low:2544kB high:3052kB active_anon:93228kB inactive_anon:424kB active_file:52kB inactive_file:164kB unevictable:0kB isolated(anon):0kB isolated(file):0kB present:260096kB mlocked:0kB dirty:0kB writeback:0kB mapped:488kB shmem:960kB slab_reclaimable:2348kB slab_unreclaimable:8564kB kernel_stack:760kB pagetables:520kB unstable:0kB bounce:0kB writeback_tmp:0kB pages_scanned:292 all_unreclaimable? yes
lowmem_reserve[]: 0 0
Normal: 2163*4kB 809*8kB 174*16kB 9*32kB 0*64kB 0*128kB 0*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB = 18196kB
326 total pagecache pages
0 pages in swap cache
Swap cache stats: add 0, delete 0, find 0/0
Free swap = 0kB
Total swap = 0kB
65536 pages RAM
30975 pages reserved
665 pages shared
29128 pages non-shared
[ pid ] uid tgid total_vm rss cpu oom_adj oom_score_adj name
[ 349] 0 349 737 18 1 0 0 udhcpc
[ 358] 1 358 446 18 1 0 0 portmap
[ 375] 100 375 708 37 0 0 0 dbus-daemon
[ 382] 0 382 606 22 0 0 0 dropbear
[ 385] 0 385 828 23 0 0 0 inetd
[ 388] 0 388 3394 203 1 0 0 smbd
[ 390] 0 390 3394 145 0 0 0 smbd
[ 391] 0 391 1742 114 1 0 0 nmbd
[ 394] 0 394 753 31 1 0 0 syslogd
[ 396] 0 396 736 58 0 0 0 klogd
[ 400] 0 400 488 22 0 0 0 usbtunerhelper
[ 410] 101 410 875 54 1 0 0 avahi-daemon
[ 411] 101 411 875 43 1 0 0 avahi-daemon
[ 416] 0 416 737 18 0 0 0 enigma2.sh
[ 420] 0 420 42596 22037 1 0 0 enigma2
[ 3611] 0 3611 3414 183 1 0 0 smbd
[ 9370] 0 9370 3414 199 1 0 0 smbd
[10465] 0 10465 3414 196 1 0 0 smbd
[14795] 0 14795 1326 50 1 0 0 oscam-experimen
[14796] 0 14796 4351 312 1 0 0 oscam-experimen
Out of memory: Kill process 420 (enigma2) score 608 or sacrifice child
Killed process 420 (enigma2) total-vm:170384kB, anon-rss:88144kB, file-rss:4kB
[CI]:ci_dev_release
[CI]:ci_dev_release
[VID]: VIDEO_SET_STREAMTYPE 0
[VID]: VIDEO_SELECT_SOURCE 1
[VID]: VIDEO_PLAY 1 2 0
[VID]: VIDEO_CONTINUE 1 1
[VID]: VIDEO_CLEAR_BUFFER 1 1 0
[VID]: VIDEO_STOP 0 1
[VID]: VIDEO_SELECT_SOURCE 0
[CI]:ci_dev_open
[CI]:ci1_dev_open
[CI]:NEXUS_Remux_Start
[CI]:>>close_mpod tuner:0
[CI]:remux stop
[CI]:get_remux_startcnt() count : 0
[CI]:get_remux_startcnt() count : 0
[CI]:>>close_mpod tuner:1
[CI]:remux stop
[CI]:get_remux_startcnt() count : 0
[CI]:get_remux_startcnt() count : 0
CIFS VFS: cifs_mount failed w/return code = -6
CIFS VFS: cifs_mount failed w/return code = -6
[AUD]: AUDIO_SET_MUTE 0
[AUD]: AUDIO_SET_MIXER -2006827536
[AUD]: AUDIO_SET_MIXER : amixl 0, amixr 0
[AUD]: AUDIO_SET_MIXER : next left volume -200, right volume -200
[AUD]: AUDIO_SET_MIXER : next left volume -200, right volume -200
[AUD]: AUDIO_SET_MIXER -2006827536
[AUD]: AUDIO_SET_MIXER : amixl 0, amixr 0
[AUD]: AUDIO_SET_MIXER : next left volume -200, right volume -200
[AUD]: AUDIO_SET_MIXER : next left volume -200, right volume -200
FE tune
[AUD]: AUDIO_SET_BYPASS_MODE 1
[AUD]: AUDIO_SET_BYPASS_MODE Stopping decoder
[AUD]: proc_get_ac3 1 audio_passthrough_spdif : 0
[AUD]: AUDIO_SET_BYPASS_MODE ReStart decoder
[AUD]: AUDIO_PAUSE 1
[AUD]: AUDIO_PLAY 1 decoder start : 1
[VID]: VIDEO_SET_STREAMTYPE 1
[VID]: VIDEO_FREEZE 1 0
[VID]: VIDEO_PLAY 1 5 2
[VID]: VIDEO_SLOWMOTION 0 1
[VID]: VIDEO_FAST_FORWARD 0 1
[VID]: VIDEO_CONTINUE 1 1
[AUD]: AUDIO_CONTINUE 1 1 audio pid_hndl : 0xc0b3602c
[AUD]: setting mute : 0
[AUD]: AUDIO_CHANNEL_SELECT 0
[VID]: VIDEO_GET_SIZE src w: 1280 h:720 display w:1280 h:720
[VID]: VIDEO_GET_SIZE aspect: 1 6
[VID]: VIDEO_STOP 1 1
[AUD]: AUDIO_STOP 1
[AUD]: AUDIO_CONTINUE 1 0 audio pid_hndl : 0x0
[AUD]: AUDIO_CONTINUE:bcm7335->audio_pid_hndl is null 0 0
FE tune
[AUD]: AUDIO_SET_BYPASS_MODE 1
[AUD]: proc_get_ac3 1 audio_passthrough_spdif : 0
[AUD]: AUDIO_PAUSE 1
[AUD]: AUDIO_PLAY 1 decoder start : 0
[VID]: VIDEO_SET_STREAMTYPE 1
[VID]: VIDEO_FREEZE 1 0
[VID]: VIDEO_PLAY 1 5 2
[VID]: VIDEO_SLOWMOTION 0 1
[VID]: VIDEO_FAST_FORWARD 0 1
[VID]: VIDEO_CONTINUE 1 1
[AUD]: AUDIO_CONTINUE 1 1 audio pid_hndl : 0xc0b3602c
[AUD]: setting mute : 0
[VID]: VIDEO_GET_SIZE src w: 0 h:0 display w:0 h:0
[VID]: VIDEO_GET_SIZE aspect: 1 0
[VID]: VIDEO_STOP 1 1
[AUD]: AUDIO_STOP 1
[AUD]: AUDIO_CONTINUE 1 0 audio pid_hndl : 0x0
[AUD]: AUDIO_CONTINUE:bcm7335->audio_pid_hndl is null 0 0
FE tune
[AUD]: AUDIO_SET_BYPASS_MODE 1
[AUD]: proc_get_ac3 1 audio_passthrough_spdif : 0
[AUD]: AUDIO_PAUSE 1
[AUD]: AUDIO_PLAY 1 decoder start : 0
[VID]: VIDEO_SET_STREAMTYPE 0
[VID]: VIDEO_FREEZE 1 0
[VID]: VIDEO_PLAY 1 2 2
[VID]: VIDEO_SLOWMOTION 0 1
[VID]: VIDEO_FAST_FORWARD 0 1
[VID]: VIDEO_CONTINUE 1 1
[AUD]: AUDIO_CONTINUE 1 1 audio pid_hndl : 0xc0b3629c
[AUD]: setting mute : 0
[VID]: VIDEO_GET_SIZE src w: 0 h:0 display w:0 h:0
[VID]: VIDEO_GET_SIZE aspect: 1 0
[VID]: VIDEO_STOP 1 1
[AUD]: AUDIO_STOP 1
[AUD]: AUDIO_CONTINUE 1 0 audio pid_hndl : 0x0
[AUD]: AUDIO_CONTINUE:bcm7335->audio_pid_hndl is null 0 0
[AUD]: AUDIO_SET_BYPASS_MODE 1
[AUD]: proc_get_ac3 1 audio_passthrough_spdif : 0
[AUD]: AUDIO_PAUSE 1
[AUD]: AUDIO_PLAY 1 decoder start : 0
[VID]: VIDEO_SET_STREAMTYPE 0
[VID]: VIDEO_FREEZE 1 0
[VID]: VIDEO_PLAY 1 2 2
[VID]: VIDEO_SLOWMOTION 0 1
[VID]: VIDEO_FAST_FORWARD 0 1
[VID]: VIDEO_CONTINUE 1 1
[AUD]: AUDIO_CONTINUE 1 1 audio pid_hndl : 0xc0b3635c
[AUD]: setting mute : 0
[VID]: VIDEO_GET_SIZE src w: 0 h:0 display w:0 h:0
[VID]: VIDEO_GET_SIZE aspect: 1 0
[VID]: VIDEO_STOP 1 1
[AUD]: AUDIO_STOP 1
[AUD]: AUDIO_CONTINUE 1 0 audio pid_hndl : 0x0
[AUD]: AUDIO_CONTINUE:bcm7335->audio_pid_hndl is null 0 0
[AUD]: AUDIO_SET_BYPASS_MODE 1
[AUD]: proc_get_ac3 1 audio_passthrough_spdif : 0
[AUD]: AUDIO_PAUSE 1
[AUD]: AUDIO_PLAY 1 decoder start : 0
[VID]: VIDEO_SET_STREAMTYPE 1
[VID]: VIDEO_FREEZE 1 0
[VID]: VIDEO_PLAY 1 5 2
[VID]: VIDEO_SLOWMOTION 0 1
[VID]: VIDEO_FAST_FORWARD 0 1
[VID]: VIDEO_CONTINUE 1 1
[AUD]: AUDIO_CONTINUE 1 1 audio pid_hndl : 0xc0b3602c
[AUD]: setting mute : 0
[VID]: VIDEO_GET_SIZE src w: 0 h:0 display w:0 h:0
[VID]: VIDEO_GET_SIZE aspect: 1 0
[VID]: VIDEO_STOP 1 1
[AUD]: AUDIO_STOP 1
[AUD]: AUDIO_CONTINUE 1 0 audio pid_hndl : 0x0
[AUD]: AUDIO_CONTINUE:bcm7335->audio_pid_hndl is null 0 0
[CI]:ci_dev_release
[CI]:ci_dev_release
[VID]: VIDEO_SET_STREAMTYPE 0
[VID]: VIDEO_SELECT_SOURCE 1
[VID]: VIDEO_PLAY 1 2 0
[VID]: VIDEO_CONTINUE 1 1
[VID]: VIDEO_CLEAR_BUFFER 1 1 0
[VID]: VIDEO_STOP 0 1
[VID]: VIDEO_SELECT_SOURCE 0
[CI]:ci_dev_open
[CI]:ci1_dev_open
[CI]:NEXUS_Remux_Start
[CI]:>>close_mpod tuner:0
[CI]:remux stop
[CI]:get_remux_startcnt() count : 0
[CI]:get_remux_startcnt() count : 0
[CI]:>>close_mpod tuner:1
[CI]:remux stop
[CI]:get_remux_startcnt() count : 0
[CI]:get_remux_startcnt() count : 0
CIFS VFS: cifs_mount failed w/return code = -6
CIFS VFS: cifs_mount failed w/return code = -6
[AUD]: AUDIO_SET_MUTE 0
[AUD]: AUDIO_SET_MIXER -2128241168
[AUD]: AUDIO_SET_MIXER : amixl 0, amixr 0
[AUD]: AUDIO_SET_MIXER : next left volume -200, right volume -200
[AUD]: AUDIO_SET_MIXER : next left volume -200, right volume -200
[AUD]: AUDIO_SET_MIXER -2128241168
[AUD]: AUDIO_SET_MIXER : amixl 0, amixr 0
[AUD]: AUDIO_SET_MIXER : next left volume -200, right volume -200
[AUD]: AUDIO_SET_MIXER : next left volume -200, right volume -200
FE tune
[AUD]: AUDIO_SET_BYPASS_MODE 1
[AUD]: proc_get_ac3 1 audio_passthrough_spdif : 0
[AUD]: AUDIO_PAUSE 1
[AUD]: AUDIO_PLAY 1 decoder start : 0
[VID]: VIDEO_SET_STREAMTYPE 1
[VID]: VIDEO_FREEZE 1 0
[VID]: VIDEO_PLAY 1 5 2
[VID]: VIDEO_SLOWMOTION 0 1
[VID]: VIDEO_FAST_FORWARD 0 1
[VID]: VIDEO_CONTINUE 1 1
[AUD]: AUDIO_CONTINUE 1 1 audio pid_hndl : 0xc0b3602c
[AUD]: setting mute : 0
[AUD]: AUDIO_CHANNEL_SELECT 0
[VID]: VIDEO_GET_SIZE src w: 1280 h:720 display w:1280 h:720
[VID]: VIDEO_GET_SIZE aspect: 1 6
AUD]: AUDIO_STOP 1
[AUD]: AUDIO_CONTINUE 1 0 audio pid_hndl : 0x0
[AUD]: AUDIO_CONTINUE:bcm7335->audio_pid_hndl is null 0 0
================= FAN is OFF ==============================
[AUD]: AUDIO_SET_MUTE 0
FE tune
dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
[AUD]: AUDIO_SET_BYPASS_MODE 1
[AUD]: proc_get_ac3 1 audio_passthrough_spdif : 0
[AUD]: AUDIO_PAUSE 1
[AUD]: AUDIO_PLAY 1 decoder start : 0
[AUD]: AUDIO_CONTINUE 1 1 audio pid_hndl : 0xc0b35fcc
[AUD]: setting mute : 0
[VID]: VIDEO_SELECT_SOURCE 1
[VID]: VIDEO_SET_STREAMTYPE 0
[VID]: VIDEO_PLAY 0 2 0
[VID]: VIDEO_CONTINUE 0 1
[VID]: VIDEO_CLEAR_BUFFER 0 1 0
dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
[AUD]: AUDIO_CONTINUE 1 1 audio pid_hndl : 0xc0b35fcc
[AUD]: setting mute : 0
[VID]: VIDEO_SELECT_SOURCE 1
[VID]: VIDEO_SET_STREAMTYPE 0
[VID]: VIDEO_PLAY 0 2 1
[VID]: VIDEO_CONTINUE 0 1
[VID]: VIDEO_CLEAR_BUFFER 0 1 0
[VID]: VIDEO_STOP 0 1
[VID]: VIDEO_SELECT_SOURCE 0
[AUD]: AUDIO_STOP 1
[AUD]: AUDIO_CONTINUE 1 0 audio pid_hndl : 0x0
[AUD]: AUDIO_CONTINUE:bcm7335->audio_pid_hndl is null 0 0
================= FAN is OFF ==============================
[AUD]: AUDIO_SET_MUTE 0
FE tune
dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
[AUD]: AUDIO_SET_BYPASS_MODE 1
[AUD]: proc_get_ac3 1 audio_passthrough_spdif : 0
[AUD]: AUDIO_PAUSE 1
[AUD]: AUDIO_PLAY 1 decoder start : 0
[AUD]: AUDIO_CONTINUE 1 1 audio pid_hndl : 0xc0b35fcc
[AUD]: setting mute : 0
[VID]: VIDEO_SELECT_SOURCE 1
[VID]: VIDEO_SET_STREAMTYPE 0
[VID]: VIDEO_PLAY 0 2 0
[VID]: VIDEO_CONTINUE 0 1
[VID]: VIDEO_CLEAR_BUFFER 0 1 0
dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
[AUD]: AUDIO_CONTINUE 1 1 audio pid_hndl : 0xc0b35fcc
[AUD]: setting mute : 0
[VID]: VIDEO_SELECT_SOURCE 1
[VID]: VIDEO_SET_STREAMTYPE 0
[VID]: VIDEO_PLAY 0 2 1
[VID]: VIDEO_CONTINUE 0 1
[VID]: VIDEO_CLEAR_BUFFER 0 1 0
[VID]: VIDEO_STOP 0 1
[VID]: VIDEO_SELECT_SOURCE 0
[AUD]: AUDIO_STOP 1
[AUD]: AUDIO_CONTINUE 1 0 audio pid_hndl : 0x0
[AUD]: AUDIO_CONTINUE:bcm7335->audio_pid_hndl is null 0 0
================= FAN is OFF ==============================
FE tune
[AUD]: AUDIO_SET_MUTE 0
FE tune
dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
[AUD]: AUDIO_SET_BYPASS_MODE 1
[AUD]: proc_get_ac3 1 audio_passthrough_spdif : 0
[AUD]: AUDIO_PAUSE 1
[AUD]: AUDIO_PLAY 1 decoder start : 0
[AUD]: AUDIO_CONTINUE 1 1 audio pid_hndl : 0xc0b361ac
[AUD]: setting mute : 0
[VID]: VIDEO_SELECT_SOURCE 1
[VID]: VIDEO_SET_STREAMTYPE 0
[VID]: VIDEO_PLAY 0 2 0
[VID]: VIDEO_CONTINUE 0 1
[VID]: VIDEO_CLEAR_BUFFER 0 1 0
[VID]: VIDEO_STOP 0 1
[VID]: VIDEO_SELECT_SOURCE 0
dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
[AUD]: AUDIO_CONTINUE 1 1 audio pid_hndl : 0xc0b361ac
[AUD]: setting mute : 0
[VID]: VIDEO_SELECT_SOURCE 1
[VID]: VIDEO_SET_STREAMTYPE 0
[VID]: VIDEO_PLAY 0 2 0
[VID]: VIDEO_CONTINUE 0 1
[VID]: VIDEO_CLEAR_BUFFER 0 1 0
[VID]: VIDEO_STOP 0 1
[VID]: VIDEO_SELECT_SOURCE 0
[AUD]: AUDIO_STOP 1
[AUD]: AUDIO_CONTINUE 1 0 audio pid_hndl : 0x0
[AUD]: AUDIO_CONTINUE:bcm7335->audio_pid_hndl is null 0 0
bcm7335: hotplug_callback():
Hotplug - status.connected 1
bcm7335: hotplug_callback():
Hotplug - connecting HDMI to display 0xf
FE tune
[AUD]: AUDIO_SET_BYPASS_MODE 1
[AUD]: proc_get_ac3 1 audio_passthrough_spdif : 0
[AUD]: AUDIO_PAUSE 1
[AUD]: AUDIO_PLAY 1 decoder start : 0
[VID]: VIDEO_SET_STREAMTYPE 1
[VID]: VIDEO_FREEZE 1 0
[VID]: VIDEO_PLAY 1 5 2
[VID]: VIDEO_SLOWMOTION 0 1
[VID]: VIDEO_FAST_FORWARD 0 1
[VID]: VIDEO_CONTINUE 1 1
[AUD]: AUDIO_CONTINUE 1 1 audio pid_hndl : 0xc0b3620c
[AUD]: setting mute : 0
[VID]: VIDEO_GET_SIZE src w: 1280 h:720 display w:1280 h:720
[VID]: VIDEO_GET_SIZE aspect: 1 6
[VID]: VIDEO_STOP 1 1
[AUD]: AUDIO_STOP 1
[AUD]: AUDIO_CONTINUE 1 0 audio pid_hndl : 0x0
[AUD]: AUDIO_CONTINUE:bcm7335->audio_pid_hndl is null 0 0
[AUD]: AUDIO_SET_BYPASS_MODE 1
[AUD]: proc_get_ac3 1 audio_passthrough_spdif : 0
[AUD]: AUDIO_PAUSE 1
[AUD]: AUDIO_PLAY 1 decoder start : 0
[VID]: VIDEO_SET_STREAMTYPE 1
[VID]: VIDEO_FREEZE 1 0
[VID]: VIDEO_PLAY 1 5 2
[VID]: VIDEO_SLOWMOTION 0 1
[VID]: VIDEO_FAST_FORWARD 0 1
[VID]: VIDEO_CONTINUE 1 1
[AUD]: AUDIO_CONTINUE 1 1 audio pid_hndl : 0xc0b361dc
[AUD]: setting mute : 0
[VID]: VIDEO_GET_SIZE src w: 0 h:0 display w:0 h:0
[VID]: VIDEO_GET_SIZE aspect: 1 0
[VID]: VIDEO_STOP 1 1
[AUD]: AUDIO_STOP 1
[AUD]: AUDIO_CONTINUE 1 0 audio pid_hndl : 0x0
[AUD]: AUDIO_CONTINUE:bcm7335->audio_pid_hndl is null 0 0
FE tune
[AUD]: AUDIO_SET_BYPASS_MODE 1
[AUD]: proc_get_ac3 1 audio_passthrough_spdif : 0
[AUD]: AUDIO_PAUSE 1
[AUD]: AUDIO_PLAY 1 decoder start : 0
[VID]: VIDEO_SET_STREAMTYPE 1
[VID]: VIDEO_FREEZE 1 0
[VID]: VIDEO_PLAY 1 5 2
[VID]: VIDEO_SLOWMOTION 0 1
[VID]: VIDEO_FAST_FORWARD 0 1
[VID]: VIDEO_CONTINUE 1 1
[AUD]: AUDIO_CONTINUE 1 1 audio pid_hndl : 0xc0b3602c
[AUD]: setting mute : 0
[VID]: VIDEO_GET_SIZE src w: 0 h:0 display w:0 h:0
[VID]: VIDEO_GET_SIZE aspect: 1 0
[VID]: VIDEO_STOP 1 1
[AUD]: AUDIO_STOP 1
[AUD]: AUDIO_CONTINUE 1 0 audio pid_hndl : 0x0
[AUD]: AUDIO_CONTINUE:bcm7335->audio_pid_hndl is null 0 0
FE tune
[AUD]: AUDIO_SET_BYPASS_MODE 1
[AUD]: proc_get_ac3 1 audio_passthrough_spdif : 0
[AUD]: AUDIO_PAUSE 1
[AUD]: AUDIO_PLAY 1 decoder start : 0
enigma2 invoked oom-killer: gfp_mask=0xd0, order=3, oom_adj=0, oom_score_adj=0
Call Trace:
[<8056a0bc>] dump_stack+0x8/0x34
[<80087f34>] T.557+0x88/0x1ac
[<800881c0>] T.556+0x168/0x3a8
[<80088654>] out_of_memory+0x254/0x460
[<8008cf74>] __alloc_pages_nodemask+0x664/0x678
[<800beb84>] cache_alloc_refill+0x3d4/0x6d4
[<800befd8>] __kmalloc+0x154/0x15c
[<c07be900>] BRAP_FWIF_P_GenerateCitInput+0x7c/0x2308 [dvb_bcm7335]
[<c07b9fe8>] BRAP_DSPCHN_P_Start+0x920/0x1894 [dvb_bcm7335]
[<c07dead0>] BRAP_P_StartDecPath+0x3cc/0x47c [dvb_bcm7335]
[<c07a8c64>] BRAP_StartChannel+0x6cc/0x784 [dvb_bcm7335]
[<c084d764>] NEXUS_AudioDecoder_P_Start+0x750/0x97c [dvb_bcm7335]
[<c084defc>] NEXUS_AudioDecoder_Start_impl+0x56c/0x6a8 [dvb_bcm7335]
[<c0743f30>] NEXUS_AudioDecoder_Start+0x30/0x50 [dvb_bcm7335]
[<c0706f98>] bcm7335_audio_ioctl+0x5a4/0x122c [dvb_bcm7335]
[<803ee26c>] dvb_usercopy+0x124/0x204
[<800d6504>] do_vfs_ioctl+0xa0/0x6c0
[<800d6b68>] sys_ioctl+0x44/0xa8
[<8000e9fc>] stack_done+0x20/0x40
Mem-Info:
Normal per-cpu:
CPU 0: hi: 90, btch: 15 usd: 8
CPU 1: hi: 90, btch: 15 usd: 76
active_anon:23307 inactive_anon:106 isolated_anon:0
active_file:13 inactive_file:41 isolated_file:0
unevictable:0 dirty:0 writeback:0 unstable:0
free:4549 slab_reclaimable:587 slab_unreclaimable:2141
mapped:122 shmem:240 pagetables:130 bounce:0
Normal free:18196kB min:2036kB low:2544kB high:3052kB active_anon:93228kB inactive_anon:424kB active_file:52kB inactive_file:164kB unevictable:0kB isolated(anon):0kB isolated(file):0kB present:260096kB mlocked:0kB dirty:0kB writeback:0kB mapped:488kB shmem:960kB slab_reclaimable:2348kB slab_unreclaimable:8564kB kernel_stack:760kB pagetables:520kB unstable:0kB bounce:0kB writeback_tmp:0kB pages_scanned:292 all_unreclaimable? yes
lowmem_reserve[]: 0 0
Normal: 2163*4kB 809*8kB 174*16kB 9*32kB 0*64kB 0*128kB 0*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB = 18196kB
326 total pagecache pages
0 pages in swap cache
Swap cache stats: add 0, delete 0, find 0/0
Free swap = 0kB
Total swap = 0kB
65536 pages RAM
30975 pages reserved
665 pages shared
29128 pages non-shared
[ pid ] uid tgid total_vm rss cpu oom_adj oom_score_adj name
[ 349] 0 349 737 18 1 0 0 udhcpc
[ 358] 1 358 446 18 1 0 0 portmap
[ 375] 100 375 708 37 0 0 0 dbus-daemon
[ 382] 0 382 606 22 0 0 0 dropbear
[ 385] 0 385 828 23 0 0 0 inetd
[ 388] 0 388 3394 203 1 0 0 smbd
[ 390] 0 390 3394 145 0 0 0 smbd
[ 391] 0 391 1742 114 1 0 0 nmbd
[ 394] 0 394 753 31 1 0 0 syslogd
[ 396] 0 396 736 58 0 0 0 klogd
[ 400] 0 400 488 22 0 0 0 usbtunerhelper
[ 410] 101 410 875 54 1 0 0 avahi-daemon
[ 411] 101 411 875 43 1 0 0 avahi-daemon
[ 416] 0 416 737 18 0 0 0 enigma2.sh
[ 420] 0 420 42596 22037 1 0 0 enigma2
[ 3611] 0 3611 3414 183 1 0 0 smbd
[ 9370] 0 9370 3414 199 1 0 0 smbd
[10465] 0 10465 3414 196 1 0 0 smbd
[14795] 0 14795 1326 50 1 0 0 oscam-experimen
[14796] 0 14796 4351 312 1 0 0 oscam-experimen
Out of memory: Kill process 420 (enigma2) score 608 or sacrifice child
Killed process 420 (enigma2) total-vm:170384kB, anon-rss:88144kB, file-rss:4kB
[CI]:ci_dev_release
[CI]:ci_dev_release
[VID]: VIDEO_SET_STREAMTYPE 0
[VID]: VIDEO_SELECT_SOURCE 1
[VID]: VIDEO_PLAY 1 2 0
[VID]: VIDEO_CONTINUE 1 1
[VID]: VIDEO_CLEAR_BUFFER 1 1 0
[VID]: VIDEO_STOP 0 1
[VID]: VIDEO_SELECT_SOURCE 0
[CI]:ci_dev_open
[CI]:ci1_dev_open
[CI]:NEXUS_Remux_Start
[CI]:>>close_mpod tuner:0
[CI]:remux stop
[CI]:get_remux_startcnt() count : 0
[CI]:get_remux_startcnt() count : 0
[CI]:>>close_mpod tuner:1
[CI]:remux stop
[CI]:get_remux_startcnt() count : 0
[CI]:get_remux_startcnt() count : 0
CIFS VFS: cifs_mount failed w/return code = -6
CIFS VFS: cifs_mount failed w/return code = -6
[AUD]: AUDIO_SET_MUTE 0
[AUD]: AUDIO_SET_MIXER -2006827536
[AUD]: AUDIO_SET_MIXER : amixl 0, amixr 0
[AUD]: AUDIO_SET_MIXER : next left volume -200, right volume -200
[AUD]: AUDIO_SET_MIXER : next left volume -200, right volume -200
[AUD]: AUDIO_SET_MIXER -2006827536
[AUD]: AUDIO_SET_MIXER : amixl 0, amixr 0
[AUD]: AUDIO_SET_MIXER : next left volume -200, right volume -200
[AUD]: AUDIO_SET_MIXER : next left volume -200, right volume -200
FE tune
[AUD]: AUDIO_SET_BYPASS_MODE 1
[AUD]: AUDIO_SET_BYPASS_MODE Stopping decoder
[AUD]: proc_get_ac3 1 audio_passthrough_spdif : 0
[AUD]: AUDIO_SET_BYPASS_MODE ReStart decoder
[AUD]: AUDIO_PAUSE 1
[AUD]: AUDIO_PLAY 1 decoder start : 1
[VID]: VIDEO_SET_STREAMTYPE 1
[VID]: VIDEO_FREEZE 1 0
[VID]: VIDEO_PLAY 1 5 2
[VID]: VIDEO_SLOWMOTION 0 1
[VID]: VIDEO_FAST_FORWARD 0 1
[VID]: VIDEO_CONTINUE 1 1
[AUD]: AUDIO_CONTINUE 1 1 audio pid_hndl : 0xc0b3602c
[AUD]: setting mute : 0
[AUD]: AUDIO_CHANNEL_SELECT 0
[VID]: VIDEO_GET_SIZE src w: 1280 h:720 display w:1280 h:720
[VID]: VIDEO_GET_SIZE aspect: 1 6
[VID]: VIDEO_STOP 1 1
[AUD]: AUDIO_STOP 1
[AUD]: AUDIO_CONTINUE 1 0 audio pid_hndl : 0x0
[AUD]: AUDIO_CONTINUE:bcm7335->audio_pid_hndl is null 0 0
FE tune
[AUD]: AUDIO_SET_BYPASS_MODE 1
[AUD]: proc_get_ac3 1 audio_passthrough_spdif : 0
[AUD]: AUDIO_PAUSE 1
[AUD]: AUDIO_PLAY 1 decoder start : 0
[VID]: VIDEO_SET_STREAMTYPE 1
[VID]: VIDEO_FREEZE 1 0
[VID]: VIDEO_PLAY 1 5 2
[VID]: VIDEO_SLOWMOTION 0 1
[VID]: VIDEO_FAST_FORWARD 0 1
[VID]: VIDEO_CONTINUE 1 1
[AUD]: AUDIO_CONTINUE 1 1 audio pid_hndl : 0xc0b3602c
[AUD]: setting mute : 0
[VID]: VIDEO_GET_SIZE src w: 0 h:0 display w:0 h:0
[VID]: VIDEO_GET_SIZE aspect: 1 0
[VID]: VIDEO_STOP 1 1
[AUD]: AUDIO_STOP 1
[AUD]: AUDIO_CONTINUE 1 0 audio pid_hndl : 0x0
[AUD]: AUDIO_CONTINUE:bcm7335->audio_pid_hndl is null 0 0
FE tune
[AUD]: AUDIO_SET_BYPASS_MODE 1
[AUD]: proc_get_ac3 1 audio_passthrough_spdif : 0
[AUD]: AUDIO_PAUSE 1
[AUD]: AUDIO_PLAY 1 decoder start : 0
[VID]: VIDEO_SET_STREAMTYPE 0
[VID]: VIDEO_FREEZE 1 0
[VID]: VIDEO_PLAY 1 2 2
[VID]: VIDEO_SLOWMOTION 0 1
[VID]: VIDEO_FAST_FORWARD 0 1
[VID]: VIDEO_CONTINUE 1 1
[AUD]: AUDIO_CONTINUE 1 1 audio pid_hndl : 0xc0b3629c
[AUD]: setting mute : 0
[VID]: VIDEO_GET_SIZE src w: 0 h:0 display w:0 h:0
[VID]: VIDEO_GET_SIZE aspect: 1 0
[VID]: VIDEO_STOP 1 1
[AUD]: AUDIO_STOP 1
[AUD]: AUDIO_CONTINUE 1 0 audio pid_hndl : 0x0
[AUD]: AUDIO_CONTINUE:bcm7335->audio_pid_hndl is null 0 0
[AUD]: AUDIO_SET_BYPASS_MODE 1
[AUD]: proc_get_ac3 1 audio_passthrough_spdif : 0
[AUD]: AUDIO_PAUSE 1
[AUD]: AUDIO_PLAY 1 decoder start : 0
[VID]: VIDEO_SET_STREAMTYPE 0
[VID]: VIDEO_FREEZE 1 0
[VID]: VIDEO_PLAY 1 2 2
[VID]: VIDEO_SLOWMOTION 0 1
[VID]: VIDEO_FAST_FORWARD 0 1
[VID]: VIDEO_CONTINUE 1 1
[AUD]: AUDIO_CONTINUE 1 1 audio pid_hndl : 0xc0b3635c
[AUD]: setting mute : 0
[VID]: VIDEO_GET_SIZE src w: 0 h:0 display w:0 h:0
[VID]: VIDEO_GET_SIZE aspect: 1 0
[VID]: VIDEO_STOP 1 1
[AUD]: AUDIO_STOP 1
[AUD]: AUDIO_CONTINUE 1 0 audio pid_hndl : 0x0
[AUD]: AUDIO_CONTINUE:bcm7335->audio_pid_hndl is null 0 0
[AUD]: AUDIO_SET_BYPASS_MODE 1
[AUD]: proc_get_ac3 1 audio_passthrough_spdif : 0
[AUD]: AUDIO_PAUSE 1
[AUD]: AUDIO_PLAY 1 decoder start : 0
[VID]: VIDEO_SET_STREAMTYPE 1
[VID]: VIDEO_FREEZE 1 0
[VID]: VIDEO_PLAY 1 5 2
[VID]: VIDEO_SLOWMOTION 0 1
[VID]: VIDEO_FAST_FORWARD 0 1
[VID]: VIDEO_CONTINUE 1 1
[AUD]: AUDIO_CONTINUE 1 1 audio pid_hndl : 0xc0b3602c
[AUD]: setting mute : 0
[VID]: VIDEO_GET_SIZE src w: 0 h:0 display w:0 h:0
[VID]: VIDEO_GET_SIZE aspect: 1 0
[VID]: VIDEO_STOP 1 1
[AUD]: AUDIO_STOP 1
[AUD]: AUDIO_CONTINUE 1 0 audio pid_hndl : 0x0
[AUD]: AUDIO_CONTINUE:bcm7335->audio_pid_hndl is null 0 0
[CI]:ci_dev_release
[CI]:ci_dev_release
[VID]: VIDEO_SET_STREAMTYPE 0
[VID]: VIDEO_SELECT_SOURCE 1
[VID]: VIDEO_PLAY 1 2 0
[VID]: VIDEO_CONTINUE 1 1
[VID]: VIDEO_CLEAR_BUFFER 1 1 0
[VID]: VIDEO_STOP 0 1
[VID]: VIDEO_SELECT_SOURCE 0
[CI]:ci_dev_open
[CI]:ci1_dev_open
[CI]:NEXUS_Remux_Start
[CI]:>>close_mpod tuner:0
[CI]:remux stop
[CI]:get_remux_startcnt() count : 0
[CI]:get_remux_startcnt() count : 0
[CI]:>>close_mpod tuner:1
[CI]:remux stop
[CI]:get_remux_startcnt() count : 0
[CI]:get_remux_startcnt() count : 0
CIFS VFS: cifs_mount failed w/return code = -6
CIFS VFS: cifs_mount failed w/return code = -6
[AUD]: AUDIO_SET_MUTE 0
[AUD]: AUDIO_SET_MIXER -2128241168
[AUD]: AUDIO_SET_MIXER : amixl 0, amixr 0
[AUD]: AUDIO_SET_MIXER : next left volume -200, right volume -200
[AUD]: AUDIO_SET_MIXER : next left volume -200, right volume -200
[AUD]: AUDIO_SET_MIXER -2128241168
[AUD]: AUDIO_SET_MIXER : amixl 0, amixr 0
[AUD]: AUDIO_SET_MIXER : next left volume -200, right volume -200
[AUD]: AUDIO_SET_MIXER : next left volume -200, right volume -200
FE tune
[AUD]: AUDIO_SET_BYPASS_MODE 1
[AUD]: proc_get_ac3 1 audio_passthrough_spdif : 0
[AUD]: AUDIO_PAUSE 1
[AUD]: AUDIO_PLAY 1 decoder start : 0
[VID]: VIDEO_SET_STREAMTYPE 1
[VID]: VIDEO_FREEZE 1 0
[VID]: VIDEO_PLAY 1 5 2
[VID]: VIDEO_SLOWMOTION 0 1
[VID]: VIDEO_FAST_FORWARD 0 1
[VID]: VIDEO_CONTINUE 1 1
[AUD]: AUDIO_CONTINUE 1 1 audio pid_hndl : 0xc0b3602c
[AUD]: setting mute : 0
[AUD]: AUDIO_CHANNEL_SELECT 0
[VID]: VIDEO_GET_SIZE src w: 1280 h:720 display w:1280 h:720
[VID]: VIDEO_GET_SIZE aspect: 1 6
~~Rytec Team~~ VU Ultimo / VU Uno / VU Solo / Panasonic TH42-PV700 *Pli/Rytec EPG POWERED*
Re: Vastlopers van VU Duo + sinds kernel en software update! #111
-
- Rytec EPG Team
- 1,082 posts
+22
Neutral
Posted 14 February 2012 - 21:39
hoe kom je in dat ppanel menu om een swap file aan te maken? ik heb het geïnstalleerd alleen vind ik het niet terug in de applications lijst of bij systeem. ofwel kijk ik weer eens met de neus...
~~Rytec Team~~ VU Ultimo / VU Uno / VU Solo / Panasonic TH42-PV700 *Pli/Rytec EPG POWERED*
Re: Vastlopers van VU Duo + sinds kernel en software update! #112
-
- Senior Member
- 4,631 posts
+225
Excellent
Posted 14 February 2012 - 21:44
Blauwe knop -> Ppanels -> Systemtools
Re: Vastlopers van VU Duo + sinds kernel en software update! #113
-
- Rytec EPG Team
- 1,082 posts
+22
Neutral
Posted 14 February 2012 - 22:40
Blauwe knop -> Ppanels -> Systemtools
tiens tiens, zie ik niet staan met blauwe knop
als ik het goed zie staat er ergens in die dmesg log een regel "out of memory" is dat die eventuele memory leak waar men het over heeft?Wat heel belangrijk is, is onderscheid maken tussen een box / linux kernel die is gecrasht (ging ping meer), of enigma die crasht. In het eerste geval is er een hardware of een driver probleem, kan niet anders. In het tweede geval kan er een probleem met enigma, een plugin, enz. zijn. Als enigma crasht zonder crashlog, dan kan het een randgevalletje zijn, dan gaarne even inloggen en "dmesg" intypen en hier neerzetten.
~~Rytec Team~~ VU Ultimo / VU Uno / VU Solo / Panasonic TH42-PV700 *Pli/Rytec EPG POWERED*
Re: Vastlopers van VU Duo + sinds kernel en software update! #114
-
- Senior Member
- 7,766 posts
+184
Excellent
Posted 15 February 2012 - 09:04
Precies, dat is het verschijnsel. Vandaar dat ik het steeds een 'freeze' noem. Ook een kernel log toont helemaal geen bijzonderheden (en die stopt uiteraard ook op het moment van bevriezen).De keren dat ik een "vastloper" constateerde stond die ook echt vast, in standby en geen ;leevn in te krijgen, ook via telnet geen enkele communicatie mogelijk dus dat maakt het er allemaal niet makkelijker op.
Ik heb nu van alles en nog wat geprobeerd, maar niets helpt (alleen oudere drivers heb ik nog niet gedaan).
En omdat het soms een paar dagen duurt voordat het probleem zich manifesteert, maak je jezelf soms blij met een dode mus.
Edited by SatKiekerd, 15 February 2012 - 09:05.
Re: Vastlopers van VU Duo + sinds kernel en software update! #115
-
- Rytec EPG Team
- 1,082 posts
+22
Neutral
Posted 15 February 2012 - 09:37
ik ga gewoon nog een keer de duo helemaal opnieuw flashen zonder ook maar enige backups of dergelijke en de minimaal benodigde plugins
~~Rytec Team~~ VU Ultimo / VU Uno / VU Solo / Panasonic TH42-PV700 *Pli/Rytec EPG POWERED*
Re: Vastlopers van VU Duo + sinds kernel en software update! #116
-
- Senior Member
- 7,766 posts
+184
Excellent
Posted 15 February 2012 - 09:41
LoL, ik heb dat inmiddels al een aantal malen gedaan (en alleen channelsettings en CCcam geïnstalleerd): echt helemaal niets helpt.ik ga gewoon nog een keer de duo helemaal opnieuw flashen zonder ook maar enige backups of dergelijke en de minimaal benodigde plugins
Re: Vastlopers van VU Duo + sinds kernel en software update! #117
-
- PLi® Core member
- 32,766 posts
+245
Excellent
Posted 15 February 2012 - 11:04
hier de dmesg info:
Out of memory: Kill process 420 (enigma2) score 608 or sacrifice child
Dat is duidelijk, geheugen op.
Mogelijk een memory leak (of je hebt het beperkte werkgeheugen te vol gepropt met epg data)
Re: Vastlopers van VU Duo + sinds kernel en software update! #118
-
- PLi® Core member
- 46,969 posts
+541
Excellent
Posted 15 February 2012 - 11:30
Beste procedure bij een vastloper (imho).De keren dat ik een "vastloper" constateerde stond die ook echt vast, in standby en geen ;leevn in te krijgen, ook via telnet geen enkele communicatie mogelijk dus dat maakt het er allemaal niet makkelijker op.
1: ping, als die het niet doet kun je stoppen, dan staat de box helemaal vast
2: telnet, als die het nog doet, draait linux in ieder geval nog goed, als je "connection refused" krijgt, dan draait linux goed, maar de telnet daemon is gestopt (mogelijk door geheugen op) (idem ssh)
3: is er een crashlog? dan die overnemen
4: geen crashlog? neem de output van dmesg over
5: kijk of je enigma weer kunt starten (init 4; init 3)
Als je enigma weer aan de gang kunt krijgen (zonder rebooten), is de kans klein op een driver/linux issue niet zo groot. Met een crashlog idem. Zonder crashlog is het wel waarschijnlijk een linux/driver issue en dan is dmesg erg interessant.
* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.
Re: Vastlopers van VU Duo + sinds kernel en software update! #119
-
- Senior Member
- 7,766 posts
+184
Excellent
Posted 15 February 2012 - 12:00
Zoals Pedro en ik al aangaven: het ding is dan echt helemaal dood. Niks pingen, niks telnet, niks crashlog; gewoon spanning er af en weer opstarten.
Re: Vastlopers van VU Duo + sinds kernel en software update! #120
-
- Rytec EPG Team
- 1,082 posts
+22
Neutral
Posted 15 February 2012 - 12:46
hier de dmesg info:
Out of memory: Kill process 420 (enigma2) score 608 or sacrifice child
Dat is duidelijk, geheugen op.
Mogelijk een memory leak (of je hebt het beperkte werkgeheugen te vol gepropt met epg data)
dank je! ik hoop dat een herflash zal wonderen
~~Rytec Team~~ VU Ultimo / VU Uno / VU Solo / Panasonic TH42-PV700 *Pli/Rytec EPG POWERED*
7 user(s) are reading this topic
0 members, 6 guests, 0 anonymous users
-
Bing (1)
