367 replies to this topic

[pcextreme]

Hi!

 

Thanx for the great plugin! Using it an all my previous and current boxes. Saves me a lot of time and nerve

I am using VU Zero. The plugin run great on OpenPLI 7.1, but a few days ago I reinstalled my box with OpenPLI 7.3.

Installed the newest version of Your plugin from github. I can make a backup of my box to USB, but when I try to make a backup on my mounted network drive ( just as I always did ) I get an error :

 

 

 

Here are the settings of my mounted network drive :

 

<cifs>
 <mount>
  <active>True</active>
  <hdd_replacement>True</hdd_replacement>
  <ip>192.168.x.x</ip>
  <sharename>HDD</sharename>
  <sharedir>ZERO-Z</sharedir>
  <options>vers=3,sec=ntlmssp,rw</options>
  <username>username</username>
  <password>password</password>
 </mount>
</cifs>

 

I tried playing with the <options> settings ( ntlmv2,ntlm, vers=2.1 ) but the resoult is the same.

The network share did not change since the new installation of my box.

 

Any help would be greatelly appreciated!

[Dimitrij]

pcextreme

Sorry, but I don't know the solution to your problem.
Just use an internal drive or USB stick.

[pcextreme]

Thanx for the quick reply

Sent from my ONEPLUS A6013 using Tapatalk

[hkopp64]

Hello,

 

Has someone experienced and noticed with OpenPLi-8.0 and higher that FullBackUp is still working but after completed image in nfi format, it doesn't boot anymore when you want to used it as recover image.

 

If FullBackup is started in console mode and doing his job, after a few lines I noticed this message: "mount: /var/volatile/tmp/bi/boot: special device / dev / mtdblock / 2 does not exist" and Image is still building completely without errors.

 

When looking into the root path:  "/ dev / mtdblock2" the mtdblock2 is available but without a backslash between mtdblock and 2. Is this the reason or posssible cause that my backup image won't boot

 

In OpenPli-7.x  image I don's have that problem, and backup images are booting perfectly

Edited by hkopp64, 10 February 2023 - 19:29.

[hkopp64]

Forgotten to mention that I am using Auto Full Backup version 7.0 with OpenPli-8.0.

 

Before OpenPli-7.2 with Auto Full Backup version 6.8 was working fine as expected.

[hkopp64]

Also tried it on HDD, CF-Card and USB-Stick and with all got an backup image but doesn't boot when flash it back on the DM8000

[hkopp64]

IF I look into /var/volatile/log/messages;

 

Feb 11 12:38:29 dm8000 user.err kernel: uncorrectable error :
Feb 11 12:38:29 dm8000 user.err kernel: uncorrectable error :
Feb 11 12:38:29 dm8000 user.err kernel: end_request: I/O error, dev mtdblock2, sector 4096
Feb 11 12:38:29 dm8000 user.err kernel: Buffer I/O error on device mtdblock2, logical block 512
Feb 11 12:38:29 dm8000 user.err kernel: uncorrectable error :
Feb 11 12:38:29 dm8000 user.err kernel: uncorrectable error :
Feb 11 12:38:29 dm8000 user.err kernel: end_request: I/O error, dev mtdblock2, sector 4096
Feb 11 12:38:29 dm8000 user.err kernel: Buffer I/O error on device mtdblock2, logical block 512

[hkopp64]

Backup dir is made on /dev/sdc and mounted as /media/cf

 

Backup is made succesfull but tried to boot but is then turning to my DM8000 flash webpage 192.168.1.xx

 

How can I solve this or what is going wrong here, can somebody help me with this

Edited by hkopp64, 11 February 2023 - 13:48.