Jump to content


Photo

Enigma2 and BBC/ITV at 27.5W Intelsat - a big challenge


  • Please log in to reply
1651 replies to this topic

Re: Enigma2 and BBC/ITV at 27.5W Intelsat - a big challenge #1641 sleepy

  • Senior Member
  • 28 posts

0
Neutral

Posted 9 February 2021 - 13:50

Also in my place in Italy, signal seems to have decreased. I cannot give the figure in dB, since my OpenPLI in a GigaBlue insists on giving me only the %, whatever I try and set, but I am down to 55% from 65% in clear sky and dangerously down to 45-48% in downpours. Margins have reduced a lot. 1.8 m Channel Master. Sleepy

Re: Enigma2 and BBC/ITV at 27.5W Intelsat - a big challenge #1642 twol

  • Senior Member
  • 381 posts

+9
Neutral

Posted 10 February 2021 - 20:20

We have cloud cover at the moment(snowing) but still reading 11.0 dB (70%) and haven‘t noticed much difference over the months 90cm dish in  Southern Bavaria, Germany attached to GigaBlue UHD 4K


Edited by twol, 10 February 2021 - 20:20.

Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> DUR-Line DCR 5-1-8-L4 Multiswitch to 1.5M dish(28.2E)
------------------> Spaun SUS 5581/33 NFA Multiswitch to 80 cm dish(19.2E)
.........DVB-S2X into 90cm dish (27.5W)

Octagon sf8008, AX HD61, Edision Osmio 4K+, Zgemma H9Combo using Legacy ports on multiswitches
Zgemma H9twin & Zgemma H9 C/S mode into Giga4K
 


Re: Enigma2 and BBC/ITV at 27.5W Intelsat - a big challenge #1643 pecorazza

  • Senior Member
  • 100 posts

0
Neutral

Posted 11 February 2021 - 11:13

Maybe the signal is reduced only at the edges of the beam.

In Italy I noticed a further but smaller reduction of the signal

Veneto region - close to Venice



Re: Enigma2 and BBC/ITV at 27.5W Intelsat - a big challenge #1644 jpuigs

  • Senior Member
  • 1,089 posts

+28
Good

Posted 11 February 2021 - 17:49

In North Spain signal has decreased, S/N dB from 10.5 to 8.5


Spoiler

Re: Enigma2 and BBC/ITV at 27.5W Intelsat - a big challenge #1645 fcgd

  • New Member
  • 1 posts

0
Neutral

Posted 14 February 2021 - 00:12

Ive noticed that here in Stockholm too. With Triax TD65 65 cm antenna, 11495 V was 8.6dB, it went down to 7,3dB - 7.7dB

 

One of my strongest signals on this bird is/was 11608 V (Icelandic TVs) i had 11.8dB -12,2dB. And now i get 8.0dB - 8-5dB.

 

i havent tested with my other antennas. Ill try a Selfsat 50D4 next weekend but i do expect similar numbers. 



Re: Enigma2 and BBC/ITV at 27.5W Intelsat - a big challenge #1646 dog-man

  • Senior Member
  • 381 posts

+2
Neutral

Posted 23 February 2021 - 13:28

Could somebody provide an up to date LameDB please.

I think it's about time I tried to get this working on my receiver.



Re: Enigma2 and BBC/ITV at 27.5W Intelsat - a big challenge #1647 Maneto

  • New Member
  • 1 posts

0
Neutral

Posted 10 March 2021 - 14:34

Search Re: Enigma2 and BBC / ITV at 27.5 W Intelsat - big challenge # 1601
There you have a file.zip


Re: Enigma2 and BBC/ITV at 27.5W Intelsat - a big challenge #1648 dog-man

  • Senior Member
  • 381 posts

+2
Neutral

Posted 10 March 2021 - 14:44

 

Search Re: Enigma2 and BBC / ITV at 27.5 W Intelsat - big challenge # 1601
There you have a file.zip

 

Thank You.



Re: Enigma2 and BBC/ITV at 27.5W Intelsat - a big challenge #1649 bitje

  • Member
  • 4 posts

0
Neutral

Posted 1 April 2021 - 09:03

Goodday,....

 

If i understand you need only by openpli ( ihave 8.3 and running oscam-emu) the lamedb and softcam.key

when i download the channels not a lot works,...

This is my log

 

  • 2021/04/01 10:07:30 00000000 s (main) Host name = lunix4k
  • 2021/04/01 10:07:30 00000000 s (main) Release = 4.1.20
  • 2021/04/01 10:07:30 00000000 s (main) Version = #1 SMP Fri Dec 25 04:34:38 UTC 2020
  • 2021/04/01 10:07:30 00000000 s (main) Machine = armv7l
  • 2021/04/01 10:07:30 00000000 s (main) Stb model = dm8000
  • 2021/04/01 10:07:30 00000000 s (main) Stb vumodel = vuuno4k
  • 2021/04/01 10:07:30 00000000 s (main) Stb boxtype = dm8000
  • 2021/04/01 10:07:30 00000000 s (main) creating pidfile /tmp/oscam-emu.pid with pid 2812
  • 2021/04/01 10:07:30 00000000 s (emu) OSCam-Emu version 798
  • 2021/04/01 10:07:30 00000000 s (config) userdb reloaded: 2 accounts loaded, 0 expired, 0 disabled
  • 2021/04/01 10:07:30 00000000 s (main) signal handling initialized
  • 2021/04/01 10:07:30 00000000 s (config) 10 provid's loaded
  • 2021/04/01 10:07:30 00000000 s (config) 164 service-id's loaded in 0 ms
  • 2021/04/01 10:07:30 00000000 s (net) cs378x: initialized (fd=3, port=12005)
  • 2021/04/01 10:07:30 00000000 s (reader) lower_card [internal] creating thread for device /dev/sci0
  • 2021/04/01 10:07:30 00000000 s (reader) emulator [emu] creating thread for device emulator
  • 2021/04/01 10:07:30 00000000 s (main) waiting for local card init
  • 2021/04/01 10:07:30 0EF0621F r (emu) Stream key delayer initialized
  • 2021/04/01 10:07:30 0EF0621F r (emu) Stream relay server initialized
  • 2021/04/01 10:07:30 0EF0621F r (reader) emulator [emu] Reader initialized (device=emulator, detect=cd, mhz=357, cardmhz=357)
  • 2021/04/01 10:07:30 3A8E8341 r (reader) lower_card [internal] Reader initialized (device=/dev/sci0, detect=cd, pll max=27.00 MHz, wanted mhz=3.57 MHz)
  • 2021/04/01 10:07:30 3A8E8341 r (reader) lower_card [internal] Reader sci internal, detected box type: dm8000
  • 2021/04/01 10:07:30 00000000 (emu) INFO: FFDecsa parallel mode = 32
  • 2021/04/01 10:07:30 62DFD210 h (webif) webif: decompressed 176175 bytes back into 425256 bytes
  • 2021/04/01 10:07:30 62DFD210 h (webif) HTTP Server running. ip=:: port=8081
  • 2021/04/01 10:07:31 0EF0621F r (reader) emulator [emu] card detected
  • 2021/04/01 10:07:32 0EF0621F r (reader) emulator [emu] found card system emu
  • 2021/04/01 10:07:32 0EF0621F r (reader) emulator [emu] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max allotted of 1
  • 2021/04/01 10:07:32 0EF0621F r (emu) Reading key file: /etc/tuxbox/config/oscam-emu/SoftCam.Key
  • 2021/04/01 10:07:32 0EF0621F r (emu) Total keys in memory: W:0 V:0 N:0 I:0 F:30 G:0 P:0 T:0 A:0
  • 2021/04/01 10:07:32 00000000 s (main) init for all local cards done
  • 2021/04/01 10:07:32 00000000 s (emmcache) loaded 0 emmcache records from /tmp/.oscam/oscam.emmcache in 0 ms
  • 2021/04/01 10:07:32 00000000 s (emmcache) loaded 0 emmstat records from /tmp/.oscam/oscam.emmstat in 0 ms
  • 2021/04/01 10:07:32 196BB19D c (client) plain dvbapi-client granted (dvbapiau, au=auto (6 reader))
  • 2021/04/01 10:07:32 196BB19D c (dvbapi) dvbapi channelcache loaded from /etc/tuxbox/config/oscam-emu/oscam.ccache
  • 2021/04/01 10:07:32 196BB19D c (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1 maximum number of filters is 64 (oscam limit is 64)
  • 2021/04/01 10:07:32 196BB19D c (dvbapi) PMT mode 6: Connecting to enigma CA PMT listen socket...
  • 2021/04/01 10:07:32 196BB19D c (dvbapi) PMT mode 6: Successfully connected to CA PMT server (fd 11)


Re: Enigma2 and BBC/ITV at 27.5W Intelsat - a big challenge #1650 twol

  • Senior Member
  • 381 posts

+9
Neutral

Posted 1 April 2021 - 12:57

Provided you have the modified lamedb and using the key correctly in Oscam, then basically Yes


Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> DUR-Line DCR 5-1-8-L4 Multiswitch to 1.5M dish(28.2E)
------------------> Spaun SUS 5581/33 NFA Multiswitch to 80 cm dish(19.2E)
.........DVB-S2X into 90cm dish (27.5W)

Octagon sf8008, AX HD61, Edision Osmio 4K+, Zgemma H9Combo using Legacy ports on multiswitches
Zgemma H9twin & Zgemma H9 C/S mode into Giga4K
 


Re: Enigma2 and BBC/ITV at 27.5W Intelsat - a big challenge #1651 bitje

  • Member
  • 4 posts

0
Neutral

Posted 8 April 2021 - 14:36

Ok have found the problem,... in this line i have to change from F4 to F5

can anybody explane why ?

 

for example 

 

Channel 5 HD
p:BBC,c:001901,c:031901,c:050001, c:121902,C:2600,f:4         has to be f:5
4680:0cfdace7:1000:0001:25:0:0


Re: Enigma2 and BBC/ITV at 27.5W Intelsat - a big challenge #1652 twol

  • Senior Member
  • 381 posts

+9
Neutral

Posted 9 April 2021 - 15:53

 

Ok have found the problem,... in this line i have to change from F4 to F5

can anybody explane why ?

 

for example 

 

Channel 5 HD
p:BBC,c:001901,c:031901,c:050001, c:121902,C:2600,f:4         has to be f:5
4680:0cfdace7:1000:0001:25:0:0

 

I have:
p:BBC,c:001901,c:031901,c:121902,c:050001,C:2600,f:400,f:05
4680:0cfdace7:1000:0001:25:0


Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> DUR-Line DCR 5-1-8-L4 Multiswitch to 1.5M dish(28.2E)
------------------> Spaun SUS 5581/33 NFA Multiswitch to 80 cm dish(19.2E)
.........DVB-S2X into 90cm dish (27.5W)

Octagon sf8008, AX HD61, Edision Osmio 4K+, Zgemma H9Combo using Legacy ports on multiswitches
Zgemma H9twin & Zgemma H9 C/S mode into Giga4K
 





0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users