You ask for the alaw codec, and my reply is "it is in the feeds, just install it".
2520 replies to this topic
Re: GStreamer 1.0 #2501
-
- PLi® Core member
- 70,563 posts
+1,816
Excellent
Posted 23 October 2017 - 11:25
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Re: GStreamer 1.0 #2502
-
- Senior Member
- 131 posts
+3
Neutral
Posted 23 October 2017 - 12:09
You ask for the alaw codec, and my reply is "it is in the feeds, just install it".
opkg install gstreamer1.0-plugins-good-alaw
theres nothing there
Re: GStreamer 1.0 #2503
-
- PLi® Core member
- 70,563 posts
+1,816
Excellent
Posted 23 October 2017 - 13:03
What image are you running?
root@h3:~# opkg install gstreamer1.0-plugins-good-alaw Installing gstreamer1.0-plugins-good-alaw (1.12.00+git16633+27f40ec) on root. Downloading http://downloads.openpli.org/feeds/openpli-6-release/mips32el/gstreamer1.0-plugins-good-alaw_1.12.00+git16633+27f40ec-r0.0_mips32el.ipk. Configuring gstreamer1.0-plugins-good-alaw. root@h3:~#
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Re: GStreamer 1.0 #2504
-
- Senior Member
- 1,128 posts
+34
Good
Posted 23 October 2017 - 15:02
Hi,
why riddle? Did you take a look with
opkg list | grep alaw
to see if it is on the feed and if it is simply install it?
When I tried to activate my FosCam WiFi-Cam I had the same problem and I had to install on that image alaw also by hand.
ciao
Re: GStreamer 1.0 #2505
-
- PLi® Core member
- 70,563 posts
+1,816
Excellent
Posted 23 October 2017 - 15:46
No riddles whatsover:
root@hd2400:~# opkg list | grep alaw gstreamer1.0-plugins-good-alaw - 1.12.00+git16633+27f40ec-r0.0 - GStreamer plugin for alaw GStreamer plugin for alaw root@hd2400:~#
If you are not clear about what you do, and don't answer questions like what box and what image you're using, how do you expect people to help you?
And yes, you do need to install it by hand, by default an OpenPLi image only installed what is absolutely nessecary, contrary to other images, which install everything but the kitchen sink, and as a result are slow as a snail...
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Re: GStreamer 1.0 #2506
-
- Senior Member
- 131 posts
+3
Neutral
Posted 26 October 2017 - 15:42
anyway after piss balling about trying to get the alaw codec from the feed
i got it and installed it
it dont work so i used readelf to open the .so
i think a lot more files are needed for this alaw codec to work
see file below
Attached Files
-
so.out.txt 17.08KB
14 downloads
Re: GStreamer 1.0 #2507
-
- PLi® Core member
- 70,563 posts
+1,816
Excellent
Posted 26 October 2017 - 15:46
Quite possible. Gstreamer isn't my thing, so I have to pass you on to someone with more knowledge about the subject.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Re: GStreamer 1.0 #2508
-
- Senior Member
- 624 posts
+18
Neutral
Posted 26 October 2017 - 18:14
And can you give a couple of audio files for testing?
Re: GStreamer 1.0 #2509
-
- New Member
- 1 posts
0
Neutral
Posted 31 October 2019 - 15:16
Hi
I am new to the forum I have problem with gstreamer 1.0 on wetek play 2 here is the dcc screen shot attachment it gives dependency error if any one could help me to resolve this issue ll be appreciated
thanks
DCC Screen.JPG 97.3KB
9 downloads
Re: GStreamer 1.0 #2510
-
- Forum Moderator
PLi® Core member - 27,495 posts
+397
Excellent
Posted 31 October 2019 - 15:22
Wetek Play isn't supported by OpenPLi anymore and certainly not the Wetek Play 2. Sorry but you'll have to seek for support somewhere else.
Perhaps the one that created that specific image for your Wetek Play 2, as our latest image is OpenPLi 4 from 12/2018.
Mijn schotel is een T90 met 10 LNB's. Daarnaast voor de fun nog een draaibaar systeem met een Triax TD 78.
Dreamboxen heb ik niet meer echt actief. Verder heb ik ook nog een een VU+ duo2 met 500Gb harddisk + een VU+ Uno, Zero, Solo 4K, Ultimo 4K, Zero 4K, Uno 4Kse. + ook nog een Xtrend ET7x00. Daarnaast heb ik ook nog diverse andere modellen w.o. een Formuler F4, ET8500, ET7500, Mut@nt 2400HD, Xsarius Fusion HD se en verder nog wel het e.e.a. waarmee op verzoek vanalles wordt getest. Iemand moet het tenslotte doen. 
Los van de eerder genoemde modellen heb ik nog wel een rits aan testsamples als Mut@nt 2400HD, HD60, GB UE4K, GB Trio4K, Maxitec Multibox combo en Twin, Octagon sf8008, sf8008 mini en last but nog least enkele modellen van het Grieks Duitse Edision.
Voor centrale opslag van media gebruik ik een Qnap 219P met tweemaal 2 Tb harddisks + een Synology DS414 met 12 Tb Totale opslag.
-------------------------------------------------------------------------------------------
Many answers to your question can be found in our wiki: Just one click away from this "solutioncentre".
Als ik alles al wist hoefde ik ook niets te vragen. If I had all the knowledge I had no questions at all.
Re: GStreamer 1.0 #2511
-
- PLi® Core member
- 70,563 posts
+1,816
Excellent
Posted 31 October 2019 - 15:41
The main reason btw for dropping support was that the manufacturer failed to implement gstreamer 1.0, which is why we couldn't release an OpenPLi 6 image for the Wetek Play.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Re: GStreamer 1.0 #2512
-
- Senior Member
- 1,128 posts
+34
Good
Posted 31 October 2019 - 20:42
Hi,
the plugins do not start with gst anymore instead gstreamer1.0 is used so you cannot find gst-plugins for >=1.0
ciao
Re: GStreamer 1.0 #2513
-
- Member
- 9 posts
0
Neutral
Posted 24 December 2019 - 22:47
VC-1 (in mkv) and wmv playing.
Is this possible?
openpli 7.1
gstreamer - 1.14.4
Re: GStreamer 1.0 #2514
-
- PLi® Core member
- 46,969 posts
+542
Excellent
Posted 26 December 2019 - 10:38
IIRC there are known issues with VC1 on VU+. I have reported it some time ago.
Edited by Erik Slagter, 26 December 2019 - 10:39.
* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.
Re: GStreamer 1.0 #2515
-
- PLi® Core member
- 57,224 posts
+701
Excellent
Posted 26 December 2019 - 12:35
Latest broadcom drivers do not support older codex anymore.
WaveFrontier 28.2E | 23.5E | 19.2E | 16E | 13E | 10/9E | 7E | 5E | 1W | 4/5W | 15W
Re: GStreamer 1.0 #2516
-
- Senior Member
- 1,297 posts
+41
Good
Posted 26 December 2019 - 13:29
We can expect that more and more devices will lost support for older codecs in the future. "Xvid" for example.
Sent from my HTC U11 using Tapatalk
Sent from my HTC U11 using Tapatalk
Army MoodBlue HD skin modification by me: https://github.com/T...-MoodBlueHD-mod
Matrix10 MH-HD2 skin modification by me: https://github.com/B...-MX-HD2-OpenPli
MetrixHD skin modification by me: https://github.com/T...xHD-WPstyle-mod
Slovenian translation for OpenPLi E2: https://github.com/T...ion-for-OpenPLi
Matrix10 MH-HD2 skin modification by me: https://github.com/B...-MX-HD2-OpenPli
MetrixHD skin modification by me: https://github.com/T...xHD-WPstyle-mod
Slovenian translation for OpenPLi E2: https://github.com/T...ion-for-OpenPLi
Re: GStreamer 1.0 #2517
-
- PLi® Core member
- 46,969 posts
+542
Excellent
Posted 27 December 2019 - 10:22
"xvid" = "divx" = "mpeg 4 asp" = actually mpeg 4 video codec (as opposed to mpeg 4 advanced video codec = h264).
The dm800 already didn't support mpeg4 vc. Mpeg4 vc is a disaster (according to the DVB guys...), it's an "improved" version of mpeg2, but the improvements are marginal and it also imposes all sorts of limitations. That's why DVB never adopted it. And nowadays it's also very obsoleted (released end 1990's, and it already has TWO successors).
So I think it can be very well defended that support for mpeg 4 vc is dropped. Mpeg2 is still supported as it's still part of DVB, which mpeg4 vc isn't.
On the other hand, VC-1 is still actual. It was meant to be a competitor to h264 from Microsoft, but never got really foothold. But it's still actual. But also it has never been part of DVB so manufacturers are free to not implement support.
* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.
Re: GStreamer 1.0 #2518
-
- Member
- 9 posts
0
Neutral
Posted 27 December 2019 - 20:04
On the other hand, VC-1 is still actual.
It can be found (VC-1) in many blyray discs (and remuxes), and can not be played on VU+
By the way, wmv 9 codec is playable, but wmv 8 can not be played. May be it can be possible in the future?
Re: GStreamer 1.0 #2519
-
- PLi® Core member
- 70,563 posts
+1,816
Excellent
Posted 27 December 2019 - 20:22
Blueray rips you mean?
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Re: GStreamer 1.0 #2520
-
- PLi® Core member
- 7,185 posts
+323
Excellent
Posted 27 December 2019 - 23:22
Better don’t expect that it will be possible in future. Buy a real mediaplayer. A satellite receiver is build to playback DVB content and wmv, vc-1,... are no codecs used in DVB streams. Manufacturer don’t want to pay license fees for something that is not really “necessary”.
Xtrend ET-9200, ET-8000, ET-10000, OpenPliPC on Ubuntu 12.04
Also tagged with one or more of these keywords: gstreamer, 1.0, openpli
DVB subtitles support in eServiceMP3/GStreamerStarted by DimitarCC, 17 Oct 2024  DVB, Subtitles, GStreamer
|
|
|
||
Change from openvix to openpli - lose existing hdd recordings?Started by xdoktor, 30 Dec 2023 openpli, openvix, hdd, recordings
|
|
|
||
Having Trouble While Installing This SoftwareStarted by CharleyDavis, 27 Jun 2023 OpenPLi
|
|
|
||
Faild to flash or update OPENPLIStarted by dede_one, 8 Oct 2022 openpli
|
|
|
||
hd+ funktioneret nichtStarted by JeppeG, 29 Sep 2022 Vu+, hd+, oscam, openpli
|
|
|
7 user(s) are reading this topic
0 members, 6 guests, 0 anonymous users
-
Bing (1)
