Same problem here as karl described: 500 OOPS: priv_sock_get_result
No FTP connection.
Should I edit /etc/vsfpd.conf (with Dreamexplorer) ? or any workaround ?
![Photo](https://forums.openpli.org/uploads/profile/photo-9.jpg?_r=0)
OpenPli VU+ Duo2 support
Re: OpenPli VU+ Duo2 support #41
Re: OpenPli VU+ Duo2 support #42
Re: OpenPli VU+ Duo2 support #43
Re: OpenPli VU+ Duo2 support #44
Posted 11 August 2013 - 08:20
Now I cant use rc on either pli or vix after flashing...
Any idea what to do?
Re: OpenPli VU+ Duo2 support #45
Posted 11 August 2013 - 08:56
System Code Change.
You can change the system code of your Vu+ universal RCU according to the Vu+ model that you want to control. The default system code is Mode 2.
Mode 1 : SOLO / DUO
Mode 2 : UNO / Ultimo / SOLO2 / DUO2
Mode 3 & 4 : reserved for future models.
Press <<2 + 7>>, <HELP>, <0001 or 0002 or 0003 or 0004>
Press 2 and 7 for three seconds until LED is on.
Press HELP
Press <0001 or 0002 or 0003 or 0004>
Re: OpenPli VU+ Duo2 support #46
Re: OpenPli VU+ Duo2 support #47
Re: OpenPli VU+ Duo2 support #48
Posted 11 August 2013 - 10:14
Hi!
Can someone confirm that feeds are working now?
cu
KJ
The feeds are working in the sunday morning image. I have loaded that one, but there is a problem with the configuration of the tuners. It is very slow and the raders are turning around on every keyclick from the remote. And that wasn't the case in the image yesterday afternoon. The feeds are working, but the downloaded and installed cams and also other plugins aren't. As far as i can see there is a problem using opkg in this image. Can anyone confirm that?
Re: OpenPli VU+ Duo2 support #49
Re: OpenPli VU+ Duo2 support #50
Posted 11 August 2013 - 14:49
can download both of them
http://openpli.org/download/vuduo2/
maybe a downloadserver was still syncing
on the Glassfibre 1GB DVB-C...
Re: OpenPli VU+ Duo2 support #51
Posted 11 August 2013 - 21:23
The sync to one of the mirrors was broken, but that should be fixed now.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Re: OpenPli VU+ Duo2 support #52
Re: OpenPli VU+ Duo2 support #53
Re: OpenPli VU+ Duo2 support #54
Posted 11 August 2013 - 22:19
I don't think anyone said it was finished. Or ready to use. Or that you should install it. Or that it even works...
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Re: OpenPli VU+ Duo2 support #55
Re: OpenPli VU+ Duo2 support #56
Posted 15 August 2013 - 08:59
Thanks for support this box with wonderful openli image
Installed work pretty good and fast, but two problems I found here
1. I can't grab video shot. Got Bus error
openpli 4 vuduo2 vuduo2 login: root root@vuduo2:~# grab -j 100 AiO Screengrabber 8.4.0 Grabbing 32bit Framebuffer ... 640 ... Framebuffer-Size: 1280 x 720 Grabbing Video ... Bus error root@vuduo2:~#
OSD grabbing is ok
root@vuduo2:~# grab -o -j 100 AiO Screengrabber 8.4.0 Grabbing 32bit Framebuffer ... 640 ... Framebuffer-Size: 1280 x 720 Saving 24 bit /tmp/screenshot.jpg ... ... Done ! root@vuduo2:~#
Re: OpenPli VU+ Duo2 support #57
Posted 17 August 2013 - 13:26
System Code Change.
You can change the system code of your Vu+ universal RCU according to the Vu+ model that you want to control. The default system code is Mode 2.
Mode 1 : SOLO / DUO
Mode 2 : UNO / Ultimo / SOLO2 / DUO2
Mode 3 & 4 : reserved for future models.
Press <<2 + 7>>, <HELP>, <0001 or 0002 or 0003 or 0004>
Press 2 and 7 for three seconds until LED is on.
Press HELP
Press <0001 or 0002 or 0003 or 0004>
Re: OpenPli VU+ Duo2 support #58
Posted 17 August 2013 - 13:32
I think some files from openvix was present. Now my remote control works again.
Re: OpenPli VU+ Duo2 support #59
Posted 17 August 2013 - 20:14
Tried OpenPLI on VU Duo2 and I have many problems.
- Spinner turns like crazy, really fast and box is non-responsive.
- From telnet, I can see that enigma2 is always at 90-100% cpu utilization.
- DVB-C/T combo tuner displays DVB-C and ATSC (instead of DVB-T). When configured as ATSC, I can scan and find DVB-T channels, but then they are greyed in enigma2.
- Tried opkg update ; opkg upgrade but there are some dependency errors for lcd4linux and pyusb
My configuration is one single DVB-S2 tuner (Avalink) and one DVB-C/T combo tuner.
Edited by malakudi, 17 August 2013 - 20:16.
Re: OpenPli VU+ Duo2 support #60
Posted 18 August 2013 - 20:20
My issue with enigma2 100% cpu load and spinner turning like crazy was resolved after I updated the CFE to v2. Other issues (ATSC and dependencies) still remain.
* check_data_file_clashes: Package enigma2-plugin-extensions-lcd4linux wants to install file /usr/lib/python2.7/site-packages/usb/util.py But that file is already provided by package * python-pyusb
Edited by malakudi, 18 August 2013 - 20:24.
5 user(s) are reading this topic
0 members, 5 guests, 0 anonymous users