Jump to content


Photo

today update broke openpli


  • Please log in to reply
266 replies to this topic

Re: today update broke openpli #101 Meega

  • Senior Member
  • 3,000 posts

+51
Good

Posted 24 December 2014 - 08:07

 

IF I do a software update directly from my vu+solo2,does this automatically flash the box to the latest image? 

 

 

No, it updates the box to the latest image.

How old is your image at this moment?

If older than a few day's ,you better flash,as you can read in this topic.

 

 

confused me! you say no then say it updates the box to the latest image? 

not sure if that means is does or doesn't flash the box. 

what I have at the moment is openpli 4,enigma 21.12.14 and my last upgrade was 22.12.14.

so should I proceed with update directly through box? 

 

Updating is not always the same as flashing.

 

Seems it depends when was the last time you flashed (not updated!) your box.

Correct. :)


ET10000+ Openpli 6.1,1m schotel 4x duo-lnb op vaste opstelling.

Momolights teensy 2.0 met 50 leds op een string ,150 channels
DM8000 Openpli 6.1 Release


Re: today update broke openpli #102 greatred

  • Senior Member
  • 268 posts

+2
Neutral

Posted 24 December 2014 - 08:07

Now I`m confused :)

 

So the ext4 modules are not missing in new images for all boxes ?



Re: today update broke openpli #103 Meega

  • Senior Member
  • 3,000 posts

+51
Good

Posted 24 December 2014 - 08:08

Nope,only vu ,i think.


ET10000+ Openpli 6.1,1m schotel 4x duo-lnb op vaste opstelling.

Momolights teensy 2.0 met 50 leds op een string ,150 channels
DM8000 Openpli 6.1 Release


Re: today update broke openpli #104 greatred

  • Senior Member
  • 268 posts

+2
Neutral

Posted 24 December 2014 - 08:14

I see, Thanks for clarifying this. Now I understand why you were referring to piece of cake :)



Re: today update broke openpli #105 Meega

  • Senior Member
  • 3,000 posts

+51
Good

Posted 24 December 2014 - 08:17

:)


ET10000+ Openpli 6.1,1m schotel 4x duo-lnb op vaste opstelling.

Momolights teensy 2.0 met 50 leds op een string ,150 channels
DM8000 Openpli 6.1 Release


Re: today update broke openpli #106 Teesi

  • Member
  • 23 posts

0
Neutral

Posted 25 December 2014 - 13:39

Not a piece of cake for me.

Restoring of the settings leads to crash loop.

 

Full crashlog:

 

<?xml version="1.0" encoding="utf-8"?>
<openpli>
<enigma2>
<crashdate>Thu Jan  1 01:07:14 1970</crashdate>
<compiledate>Dec 22 2014</compiledate>
<contactemail>forum at www.openpli.org</contactemail>
<!-- Please email this crashlog to above address -->
<skin>Default Skin</skin>
<sourcedate>2014-12-21</sourcedate>
<branch>(no branch)</branch>
<rev>ba54e4f</rev>
<version>3.0.0</version>
</enigma2>
<image>
<stbmodel>ultimo</stbmodel>
<kernelversion>
<![CDATA[
Linux vuultimo 3.9.6 #1 SMP Fri Dec 19 20:35:50 CET 2014 mips GNU/Linux
]]>
</kernelversion>
<kernelcmdline>bmem=232M ubi.mtd=0 root=ubi0:rootfs rootfstype=ubifs rw rootflags=sync</kernelcmdline>
<nimsockets>NIM Socket 0:</nimsockets>
<imageversion>
<!-- No such file or directory -->
</imageversion>
<imageissue>
<![CDATA[
openpli 4 %h
 
]]>
</imageissue>
</image>
<software>
<enigma2software>
<![CDATA[
enigma2 - 2.7+git29+ba54e4f06c-r49.0
enigma2-fonts - 2014.12.17-r0
enigma2-meta - 2.7+git31+09851ff6d4-r49.0
enigma2-plugin-extensions-audiosync - experimental-git5+802a267170-r10.14
enigma2-plugin-extensions-autobackup - 2.0+git2+8333c64aba-r0.197
enigma2-plugin-extensions-autotimer - experimental-git5+802a267170-r10.16
enigma2-plugin-extensions-backupsuite - 20+git10+52e864bad5-r0.0
enigma2-plugin-extensions-changerootpassword - 1.0+git0+69babdad57-r1.641
enigma2-plugin-extensions-cutlisteditor - 2.7+git29+ba54e4f06c-r49.0
enigma2-plugin-extensions-epgrefresh - experimental-git5+802a267170-r10.16
enigma2-plugin-extensions-epgsearch - experimental-git5+802a267170-r10.16
enigma2-plugin-extensions-fancontrol2 - experimental-git5+802a267170-r10.16
enigma2-plugin-extensions-filebrowser - experimental-git5+802a267170-r10.16
enigma2-plugin-extensions-foreca - git0+61daf00d51-r0.641
enigma2-plugin-extensions-graphmultiepg - 2.7+git29+ba54e4f06c-r49.0
enigma2-plugin-extensions-mediaplayer - 2.7+git29+ba54e4f06c-r49.0
enigma2-plugin-extensions-mediascanner - 2.7+git29+ba54e4f06c-r49.0
enigma2-plugin-extensions-openwebif - 1+git13+3096f16643-r0.0
enigma2-plugin-extensions-oscamstatus - 0.61-r3
enigma2-plugin-extensions-pictureplayer - 2.7+git29+ba54e4f06c-r49.0
enigma2-plugin-extensions-ppanel - 2.0+git0+4ce6ca5915-r0.689
enigma2-plugin-extensions-webcamviewer - experimental-git5+802a267170-r10.16
enigma2-plugin-pli-softcamsetup - 1.0+git0+6cb700ded8-r7.3
enigma2-plugin-skins-metrixhd-wpstyle-mod-pli - 3.1
enigma2-plugin-skins-pd1loi-hd-full-hd - 3.3
enigma2-plugin-skins-pli-hd - 0.1+git7+1158744212-r1.0
enigma2-plugin-skins-pli-hd-fullnight - 0.1+git3+94fedd03fa-r0.0
enigma2-plugin-softcams-oscam - svn10071-r0.0
enigma2-plugin-systemplugins-automaticcleanup - experimental-git5+802a267170-r10.16
enigma2-plugin-systemplugins-cablescan - 2.7+git29+ba54e4f06c-r49.0
enigma2-plugin-systemplugins-devicemanager-pli3.0 - 1.0-r0
enigma2-plugin-systemplugins-epgcacheselector - 1.2-r0
enigma2-plugin-systemplugins-fastscan - 2.7+git29+ba54e4f06c-r49.0
enigma2-plugin-systemplugins-firmwareupgrade - experimental-git1+b0fb2521ce-r6.0
enigma2-plugin-systemplugins-fpgaupgrade - experimental-git1+b0fb2521ce-r6.0
enigma2-plugin-systemplugins-hdmicec - 2.7+git29+ba54e4f06c-r49.0
enigma2-plugin-systemplugins-hotplug - 2.7+git29+ba54e4f06c-r49.0
enigma2-plugin-systemplugins-ledbrightnesssetup - experimental-git1+b0fb2521ce-r6.0
enigma2-plugin-systemplugins-manualfancontrol - experimental-git1+b0fb2521ce-r6.0
enigma2-plugin-systemplugins-mphelp - experimental-git5+802a267170-r10.16
enigma2-plugin-systemplugins-networkbrowser - experimental-git5+802a267170-r10.14
enigma2-plugin-systemplugins-osd3dsetup - 2.7+git29+ba54e4f06c-r49.0
enigma2-plugin-systemplugins-osdpositionsetup - 2.7+git29+ba54e4f06c-r49.0
enigma2-plugin-systemplugins-positionersetup - 2.7+git29+ba54e4f06c-r49.0
enigma2-plugin-systemplugins-remotecontrolcode - experimental-git1+b0fb2521ce-r6.0
enigma2-plugin-systemplugins-satfinder - 2.7+git29+ba54e4f06c-r49.0
enigma2-plugin-systemplugins-setpasswd - experimental-git5+802a267170-r10.16
enigma2-plugin-systemplugins-skinselector - 2.7+git29+ba54e4f06c-r49.0
enigma2-plugin-systemplugins-softwaremanager - 2.7+git29+ba54e4f06c-r49.0
enigma2-plugin-systemplugins-videomode - 2.7+git29+ba54e4f06c-r49.0
enigma2-plugin-systemplugins-videotune - 2.7+git29+ba54e4f06c-r49.0
enigma2-plugin-systemplugins-vuplus-fancontrol-in-standby - 2011-01-24
enigma2-plugin-systemplugins-wirelesslan - 2.7+git29+ba54e4f06c-r49.0
enigma2-plugins - experimental-git5+802a267170-r10.14
enigma2-plugins-meta - experimental-git5+802a267170-r10.16
enigma2-skins-meta - experimental-git0+472e9d9257-r2.4
]]>
</enigma2software>
<vuplussoftware>
<![CDATA[
vuplus-blindscan-dvbc-utils-vuultimo - 3.6-r3.0
vuplus-dvb-modules-vuultimo - 3.9.6+20141021-r0.0
vuplus-shutdown - 1.0-r1.1
]]>
</vuplussoftware>
<gstreamersoftware>
<![CDATA[
gst-ffmpeg - 0.10.13-r8.4
gst-plugin-libxt - 0.10.0+git0+568b515fa8-r0.4
gst-plugin-subsink - 0.10.0+git0+0cb20d6024-r2.0
gst-plugin-vuplus-dvbmediasink - 0.10+git1+a02fcc119e-r20.1
gst-plugins-bad - 0.10.23.1+git0+fb0d8700e7-r4.3
gst-plugins-bad-cdxaparse - 0.10.23.1+git0+fb0d8700e7-r4.3
gst-plugins-bad-faad - 0.10.23.1+git0+fb0d8700e7-r4.3
gst-plugins-bad-fragmented - 0.10.23.1+git0+fb0d8700e7-r4.3
gst-plugins-bad-mms - 0.10.23.1+git0+fb0d8700e7-r4.3
gst-plugins-bad-mpegdemux - 0.10.23.1+git0+fb0d8700e7-r4.3
gst-plugins-bad-rtmp - 0.10.23.1+git0+fb0d8700e7-r4.3
gst-plugins-bad-vcdsrc - 0.10.23.1+git0+fb0d8700e7-r4.3
gst-plugins-base - 0.10.36.1+git0+bdb3316347-r2.3
gst-plugins-base-alsa - 0.10.36.1+git0+bdb3316347-r2.3
gst-plugins-base-app - 0.10.36.1+git0+bdb3316347-r2.3
gst-plugins-base-audioconvert - 0.10.36.1+git0+bdb3316347-r2.3
gst-plugins-base-audioresample - 0.10.36.1+git0+bdb3316347-r2.3
gst-plugins-base-decodebin - 0.10.36.1+git0+bdb3316347-r2.3
gst-plugins-base-decodebin2 - 0.10.36.1+git0+bdb3316347-r2.3
gst-plugins-base-ogg - 0.10.36.1+git0+bdb3316347-r2.3
gst-plugins-base-playbin - 0.10.36.1+git0+bdb3316347-r2.3
gst-plugins-base-subparse - 0.10.36.1+git0+bdb3316347-r2.3
gst-plugins-base-typefindfunctions - 0.10.36.1+git0+bdb3316347-r2.3
gst-plugins-base-vorbis - 0.10.36.1+git0+bdb3316347-r2.3
gst-plugins-good - 0.10.31.1+git0+7768342230-r9.3
gst-plugins-good-apetag - 0.10.31.1+git0+7768342230-r9.3
gst-plugins-good-audioparsers - 0.10.31.1+git0+7768342230-r9.3
gst-plugins-good-autodetect - 0.10.31.1+git0+7768342230-r9.3
gst-plugins-good-avi - 0.10.31.1+git0+7768342230-r9.3
gst-plugins-good-flac - 0.10.31.1+git0+7768342230-r9.3
gst-plugins-good-flv - 0.10.31.1+git0+7768342230-r9.3
gst-plugins-good-icydemux - 0.10.31.1+git0+7768342230-r9.3
gst-plugins-good-id3demux - 0.10.31.1+git0+7768342230-r9.3
gst-plugins-good-isomp4 - 0.10.31.1+git0+7768342230-r9.3
gst-plugins-good-matroska - 0.10.31.1+git0+7768342230-r9.3
gst-plugins-good-rtp - 0.10.31.1+git0+7768342230-r9.3
gst-plugins-good-rtpmanager - 0.10.31.1+git0+7768342230-r9.3
gst-plugins-good-rtsp - 0.10.31.1+git0+7768342230-r9.3
gst-plugins-good-souphttpsrc - 0.10.31.1+git0+7768342230-r9.3
gst-plugins-good-udp - 0.10.31.1+git0+7768342230-r9.3
gst-plugins-good-wavparse - 0.10.31.1+git0+7768342230-r9.3
gst-plugins-ugly - 0.10.19.1+git0+9afc696e5f-r2.7
gst-plugins-ugly-amrnb - 0.10.19.1+git0+9afc696e5f-r2.7
gst-plugins-ugly-amrwbdec - 0.10.19.1+git0+9afc696e5f-r2.7
gst-plugins-ugly-asf - 0.10.19.1+git0+9afc696e5f-r2.7
gst-plugins-ugly-cdio - 0.10.19.1+git0+9afc696e5f-r2.7
gst-plugins-ugly-dvdsub - 0.10.19.1+git0+9afc696e5f-r2.7
gst-plugins-ugly-mad - 0.10.19.1+git0+9afc696e5f-r2.7
gst-plugins-ugly-mpegaudioparse - 0.10.19.1+git0+9afc696e5f-r2.7
gst-plugins-ugly-mpegstream - 0.10.19.1+git0+9afc696e5f-r2.7
gstreamer - 0.10.36.1+git0+1bcabb9a23-r1.3
]]>
</gstreamersoftware>
</software>
<crashlogs>
<enigma2crashlog>
<![CDATA[
+ (1) Background File Eraser
+ (5) Tuxtxt
+ (8) graphics acceleration manager
+ (9) GFBDC
21600k video mem
 - double buffering available!
10800kB available for acceleration surfaces.
resolution: 1280 x 720 x 32 (stride: 7680)
+ (9) gLCDDC
found OLED display!
lcd buffer 0x7cbcc8 16384 bytes, stride 256
LCD resolution: 256 x 64 x 8 (stride: 256)
+ (9) Font Render Class
[FONT] initializing lib...
[FONT] loading fonts...
[FONT] Intializing font cache, using max. 4MB...
+ (10) gRC
RC thread created successfully
+ (15) eWindowStyleManager
+ (20) DVB-CI UI
+ (20) UHF Modulator
couldnt open /dev/rfmod0!!!!
+ (20) RC Input layer
+ (20) misc options
+ (20) AVSwitch Driver
couldnt open /dev/dbox/fp0 to monitor vcr scart slow blanking changed!
+ (21) input device driver
Input device "dreambox advanced remote control (native)" is a keyboard
Found 1 input devices.
+ (22) Hdmi CEC driver
eHdmiCEC: detected physical address change: 1000 --> 1100
eHdmiCEC: send message 84 11 00 03 
+ (30) eActionMap
+ (35) CI Slots
scanning for common interfaces..
CI Slot 0 setSource(0)
CI Slot 1 setSource(0)
eDVBCIInterfaces->setInputSource(0, 0)
eDVBCIInterfaces->setInputSource(1, 1)
eDVBCIInterfaces->setInputSource(2, 2)
eDVBCIInterfaces->setInputSource(3, 3)
done, found 2 common interface slots
+ (35) CA handler
+ (40) eServiceCenter
settings instance.
+ (41) eServiceFactoryDVD
+ (41) eServiceFactoryHDMI
+ (41) eServiceFactoryM2TS
+ (41) eServiceFactoryMP3
+ (41) eServiceFactoryFS
+ (41) eServiceFactoryDVB
+ (41) Encoders
+ (41) Stream server
reached rl 70
---- opening lame channel db
reading services (version 4)
loaded 37 channels/transponders and 216 services
scanning for frontends..
opening frontend 0
close frontend 0
opening frontend 1
close frontend 1
opening frontend 2
close frontend 2
found 1 adapter, 3 frontends(3 sim) and 9 demux, boxtype 4
RTC not ready... wait for transponder time
[EPGC] Initialized EPGCache (wait for setCacheFile call now)
Loading spinners...
[ePNG] couldn't open /usr/share/enigma2/skin_default/spinner/wait8.png
found 7 spinner!
 
setIoPrio best-effort level 3 ok
Failed to open /dev/dbox/fp0
couldn't open /proc/stb/misc/12V_output
Scanning hardware info
Detected: vuultimo (1200E8)
[Harddisk] enumerating block devices...
new Harddisk sda -> /dev/sda -> /dev/sda
[ePopen] command: ('hdparm', 'hdparm', '-S0', '/dev/sda')
Reading cables.xml
couldn't open /etc/tuxbox/cables.xml!!
Reading terrestrial.xml
sec config cleared
setSlotInfo for dvb frontend 0 to slotid 0, descr Vuplus DVB-C NIM(CXD1978), need rotorworkaround No, enabled Yes, DVB-S2 No
setSlotInfo for dvb frontend 1 to slotid 1, descr Vuplus DVB-C NIM(CXD1978), need rotorworkaround No, enabled Yes, DVB-S2 No
setSlotInfo for dvb frontend 2 to slotid 2, descr Vuplus DVB-C NIM(CXD1978), need rotorworkaround No, enabled Yes, DVB-S2 No
sec config completed
tuner type is already already 0
tuner type is already already 0
tuner type is already already 0
main thread is non-idle! display spinner!
[InfoBar] Failed to load resumepoints: [Errno 2] No such file or directory: '/home/root/resumepoints.pkl'
loading bouquet... /etc/enigma2//bouquets.tv
loading bouquet... /etc/enigma2//userbouquet.talteen__tv_.tv
17 entries in Bouquet userbouquet.talteen__tv_.tv
loading bouquet... /etc/enigma2//userbouquet.Telenor.tv
494 entries in Bouquet userbouquet.Telenor.tv
loading bouquet... /etc/enigma2//userbouquet.niput__tv_.tv
3 entries in Bouquet userbouquet.niput__tv_.tv
loading bouquet... /etc/enigma2//userbouquet.YLE.tv
7 entries in Bouquet userbouquet.YLE.tv
loading bouquet... /etc/enigma2//userbouquet..tv
494 entries in Bouquet userbouquet..tv
loading bouquet... /etc/enigma2//userbouquet.favourites.tv
19 entries in Bouquet userbouquet.favourites.tv
loading bouquet... /etc/enigma2//userbouquet.hd__tv_.tv
7 entries in Bouquet userbouquet.hd__tv_.tv
loading bouquet... /etc/enigma2//userbouquet.tallennettavat__tv_.tv
15 entries in Bouquet userbouquet.tallennettavat__tv_.tv
loading bouquet... /etc/enigma2//userbouquet.LastScanned.tv
167 entries in Bouquet userbouquet.LastScanned.tv
9 entries in Bouquet bouquets.tv
loading bouquet... /etc/enigma2//bouquets.radio
loading bouquet... /etc/enigma2//userbouquet..radio
100 entries in Bouquet userbouquet..radio
loading bouquet... /etc/enigma2//userbouquet.Telenor.radio
100 entries in Bouquet userbouquet.Telenor.radio
loading bouquet... /etc/enigma2//userbouquet.YLE.radio
4 entries in Bouquet userbouquet.YLE.radio
loading bouquet... /etc/enigma2//userbouquet.favourites.radio
0 entries in Bouquet userbouquet.favourites.radio
4 entries in Bouquet bouquets.radio
Renumbering...
[FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (Regular)
[FONT] adding font /usr/share/fonts/andale.ttf...OK (Fixed)
[FONT] adding font /usr/share/fonts/tuxtxt.ttf...OK (Console)
[FONT] adding font /usr/share/fonts/ae_AlMateen.ttf...OK (Replacement)
[FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (Regular)
[FONT] adding font /usr/share/fonts/lcd.ttf...OK (LCD)
[FONT] adding font /usr/share/fonts/tuxtxt.ttf...OK (Console)
[FONT] adding font /usr/share/fonts/andale.ttf...OK (Fixed)
[FONT] adding font /usr/share/fonts/LiberationSans-Regular.ttf...OK (Subs)
[FONT] adding font /usr/share/fonts/LiberationSans-Italic.ttf...OK (Subsi)
[FONT] adding font /usr/share/fonts/LiberationSans-Bold.ttf...OK (Subsb)
[FONT] adding font /usr/share/fonts/LiberationSans-BoldItalic.ttf...OK (Subsz)
[FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (FdLcD)
[FONT] adding font /usr/share/fonts/analog.ttf...FATAL:  failed: Operation not permitted
]]>
</enigma2crashlog>
</crashlogs>
</openpli>

I am using a GigaBlue UHD UE 4k

Re: today update broke openpli #107 WanWizard

  • PLi® Core member
  • 70,220 posts

+1,798
Excellent

Posted 25 December 2014 - 13:49

There is something in your backup (a skin, a custom skin xml) that conflicts with the current OpenPLi.


Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)

Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.

Many answers to your question can be found in our new and improved wiki.


Re: today update broke openpli #108 delavega

  • Senior Member
  • 377 posts

+2
Neutral

Posted 25 December 2014 - 22:49

is the cifs share working on solo for anyone? (with the pkgs installed...)


<p><span style="font-size:18px;"><span style="font-family:'lucida sans unicode', 'lucida grande', sans-serif;"><strong>Vu+ DUO 2</strong></span></span></p>
<p><span style="font-size:18px;"><span style="font-family:'lucida sans unicode', 'lucida grande', sans-serif;"><strong>Vu+ SOLO</strong></span></span>

Re: today update broke openpli #109 maveric

  • Senior Member
  • 126 posts

+2
Neutral

Posted 25 December 2014 - 23:32

is the cifs share working on solo for anyone? (with the pkgs installed...)

All my mounts is gone since last update and it not possible to do new ones. Cant use my boxes to share recorded films or play from NAS :(


Edited by maveric, 25 December 2014 - 23:32.


Re: today update broke openpli #110 Erik Slagter

  • PLi® Core member
  • 46,969 posts

+541
Excellent

Posted 26 December 2014 - 10:04

http://forums.openpl...ge/#entry462905


* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.


Re: today update broke openpli #111 T_I

  • Senior Member
  • 67 posts

0
Neutral

Posted 26 December 2014 - 11:16

Op, update of 23-12 killed my box (VU+ Solo2) as well, as the flash was from way back (0128). Tried to reflash the box with mixed results:

 

OpenPLi-4.0-beta-vusolo2-20141224_usb:

- Hang on 'UBIFS UPGRADE' (gave up after 1 hour, power down and up again)

- Power up gives working receiver, no cifs support, package kernel-module-cifs can't be installed as it's not available according the solo2)

- Tried OpenPLi-4.0-beta-vusolo2-20141221_usb, same result.

 

OpenPLi-4.0-beta-vusolo2-20141218_usb:

- Hang on 'UBIFS UPGRADE' (gave up after 1 hour, power down and up again)

- Power up gives Pli winter image. box listens to ssh, oscam works, enigma dead.

- Tried OpenPLi-4.0-beta-vusolo2-20140128_usb, same result.

 

Tried OpenPLi-4.0-beta-vusolo2-20141224_usb again:

- Hang on 'UBIFS UPGRADE' (gave it 10.5 hours, same result as before)

 

Finally able to download newer version OpenPLi-4.0-beta-vusolo2-20141226_usb:

- Hang on 'UBIFS UPGRADE' (gave it 10.5 hours, same result as before)

- Power up gives working receiver, no cifs support, package kernel-module-cifs can't be installed as it's not available according the solo2)

 

Giving up on cifs (windows crap, back to good old nfs), but the hang on UBIFS UPGRADE still remains. How can I fix this so the flash succeeds?


Jan Huijsmans
VU+ Solo2 + 2 TB netwerk storage, Palm SG-2100A (73E - 58W), Triax 78cm schotel + MTI AP82-XT2N


Re: today update broke openpli #112 Pedro_Newbie

  • Senior Member
  • 4,631 posts

+225
Excellent

Posted 26 December 2014 - 11:54

Does

opkg install cifs
maybe of any help?

Re: today update broke openpli #113 Teesi

  • Member
  • 23 posts

0
Neutral

Posted 26 December 2014 - 12:20

I finally got the upgrade thorough on my vu+ultimo.

 

First I deleted very old unused setting-files from hdd . Then:

 

init 4
opkg update
opkg install kernel
-module-cifs
opgk install kernel
-module-ext4

init 6

 

(Waiting for reboot to finish)

 

init 4
/etc/init.d/settings-restore.sh
/etc/init.d/autoinstall.sh
init
6

 

And box is up and running again. 


I am using a GigaBlue UHD UE 4k

Re: today update broke openpli #114 maveric

  • Senior Member
  • 126 posts

+2
Neutral

Posted 26 December 2014 - 13:08

 

is the cifs share working on solo for anyone? (with the pkgs installed...)

All my mounts is gone since last update and it not possible to do new ones. Cant use my boxes to share recorded films or play from NAS :(

 

 

 

 

 

Tried it on my Duo and it still doesn't  work

Look like this when using telnet

If we can not use VU+ to share from one VU to another or play from NAS 
Openpli is not useful anymore

 

I will go back to Blackhole, that worked 100% when i used it during the time you have problems (beginning of dec)

I do not understand what you are doing. Openpli was the best .. What are you looking for .. Is BSP the way away from a good IMG?

vuduo login: root

root@vuduo:~#

root@vuduo:~# [6nopkg update

Downloading http://downloads.pli...rty/Packages.gz

Updated list of available packages in /var/lib/opkg/openpli-3rd-party.

Downloading http://downloads.pli...duo/Packages.gz

Updated list of available packages in /var/lib/opkg/openpli-3rd-party-vuduo.

Downloading http://downloads.pli...all/Packages.gz

Updated list of available packages in /var/lib/opkg/openpli-all.

Downloading http://downloads.pli...2el/Packages.gz

Updated list of available packages in /var/lib/opkg/openpli-mips32el.

Downloading http://downloads.pli...duo/Packages.gz

Updated list of available packages in /var/lib/opkg/openpli-vuduo.

root@vuduo:~# opkg install kernel-module-cifs

Installing kernel-module-cifs (3.9.6-r5.0.2.1) on root.

Downloading http://downloads.pli...0.2.1_vuduo.ipk

Configuring kernel-module-cifs.

root@vuduo:~# opgk install kernel-module-ext4

-sh: opgk: not found

root@vuduo:~# init 6 # reboot

root@vuduo:~# 

 



Re: today update broke openpli #115 mattiL

  • Senior Member
  • 268 posts

+5
Neutral

Posted 26 December 2014 - 13:13

Oops, it seems that:

 

opgk install kernel-module-ext4 

 

should be

 

opkg install kernel-module-ext4

 

;)



Re: today update broke openpli #116 Pedro_Newbie

  • Senior Member
  • 4,631 posts

+225
Excellent

Posted 26 December 2014 - 13:13

Don't use opgk install kernel-module-ext4 but opkg install kernel-module-ext4

 

So opkg instead of opgk!


Edited by Pedro_Newbie, 26 December 2014 - 13:14.


Re: today update broke openpli #117 delavega

  • Senior Member
  • 377 posts

+2
Neutral

Posted 26 December 2014 - 13:16

been saying that forever... "helpers" keep pasting wrong commands


<p><span style="font-size:18px;"><span style="font-family:'lucida sans unicode', 'lucida grande', sans-serif;"><strong>Vu+ DUO 2</strong></span></span></p>
<p><span style="font-size:18px;"><span style="font-family:'lucida sans unicode', 'lucida grande', sans-serif;"><strong>Vu+ SOLO</strong></span></span>

Re: today update broke openpli #118 delavega

  • Senior Member
  • 377 posts

+2
Neutral

Posted 26 December 2014 - 13:17

vu solo is gonna be droped by openpli?


<p><span style="font-size:18px;"><span style="font-family:'lucida sans unicode', 'lucida grande', sans-serif;"><strong>Vu+ DUO 2</strong></span></span></p>
<p><span style="font-size:18px;"><span style="font-family:'lucida sans unicode', 'lucida grande', sans-serif;"><strong>Vu+ SOLO</strong></span></span>

Re: today update broke openpli #119 Erik Slagter

  • PLi® Core member
  • 46,969 posts

+541
Excellent

Posted 26 December 2014 - 13:22

If the negative attitude remains, it might get very tempting.


* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.


Re: today update broke openpli #120 T_I

  • Senior Member
  • 67 posts

0
Neutral

Posted 26 December 2014 - 13:30

My Solo2 is working again, will see how things develop. Next time, first read posts, then try an upgrade. ;)

 

@Pedro, reinstall of cifs didn't help, I'll stick with what I know, UNIX/Linux based shares. (Been working with the stuff since 1988)


Jan Huijsmans
VU+ Solo2 + 2 TB netwerk storage, Palm SG-2100A (73E - 58W), Triax 78cm schotel + MTI AP82-XT2N



9 user(s) are reading this topic

0 members, 9 guests, 0 anonymous users