Posted 11 December 2015 - 19:43
Edited by littlesat, 11 December 2015 - 19:45.
WaveFrontier 28.2E | 23.5E | 19.2E | 16E | 13E | 10/9E | 7E | 5E | 1W | 4/5W | 15W
Posted 11 December 2015 - 21:23
(3rd) party plugins with binaries will be a bit more difficult.... because VU+4K is on ARM.
Almost all plugins all actually only python code, even though their arch says mips32el.
* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.
Posted 11 December 2015 - 21:25
Great. So now the only OpenTV capable downloader has now been removed from OpenPLi.(3rd) party plugins with binaries will be a bit more difficult.... because VU+4K is on ARM.
I don't understand, it won't work on any non-mips32el stb anyway.
Why can't they just make a version without binary blobs? As soon as the binary blob is gone, I will re-enable it. I have no grudge whatsoever against crossepg. I do have a grudge agains closed binary blobs in an open source environment, especially when it breaks a build.
* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.
Posted 11 December 2015 - 21:26
P.S. and still I think something like openTV should be implemented in plain Enigma2.. just like and next to FastScan and CableScan...
What's holding you back.
It won't solve the problem though.
* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.
Posted 11 December 2015 - 21:27
Only binaries I can see in the repo are the MHW2 readers, so they won't work. For the rest it looks like source is available.
So... why is mhw2 reader "secret"?
* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.
Posted 12 December 2015 - 12:07
Good question. This is the last commit of those binaries: https://github.com/E...cf0d117256ec1d1
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 12 December 2015 - 13:31
mhw2epgdownloader is not a core part of CrossEPG. It is a contributed 3rd party script, unfortunately only in binary form. I guess we can remove this from the feed and let the rest of the plugin to be built.
Posted 12 December 2015 - 13:44
The core-part of Cross is 'only' the open-TV reader (and parser). All the rest can be left out.
Edited by Rob van der Does, 12 December 2015 - 13:44.
Posted 12 December 2015 - 13:51
Ideally that isn't part of an external plugin at all, but part of Enigma. Like all other EPG readers...
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 12 December 2015 - 14:03
Rob is right. The only useful part of Cross is OpenTV.What's holding you back.
It won't solve the problem though.
Posted 12 December 2015 - 14:07
The will is absolutely there, the problem is the current reader code, and the EPG implementation in general, is a mess, so that requires cleanup first.
Unfortunately, that's quite a bit of work, nobody has picked that up yet, so we're in a chicken-and-egg situation at the moment.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 12 December 2015 - 14:29
Edited by Huevos, 12 December 2015 - 14:30.
Posted 12 December 2015 - 14:30
Back to the issue. I repeat once more, when the binary blob is removed, I'd happily re-enable cross-epg.
* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.
Posted 12 December 2015 - 16:45
Other things have been added without worrying about the chicken and egg, for example, Freesat and Virgin. We are talking 10 or 20 lines of code here by someone who knows what they are doing. Does that really have to wait in the queue behind a complete rewrite of OpenPLi EPG which currently is not even on the horizon?
I just repeat what has been said. I'm not a developer, so I can't comment. As a SKY UK viewer, I would be favour of integrating it now.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 13 December 2015 - 15:29
image vu solo 4k ?
Posted 13 December 2015 - 16:50
NICE 
VU+ Ultimo 4K OpenPli 8.3 latest 1TB
Gigablue ULTRA UHD OpenPli 8.3
VU+ Zero 4K OpenPli 8.3
Samsung 65” Neo QLED 8K 65QN900A
Bose Soundbar 900 White
Synology 218+ Play 2x 3TB
Posted 14 December 2015 - 18:37
image vu solo 4k ?
read posts?
* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.
Posted 17 December 2015 - 16:29
image vu solo 4k ?
read posts?
I cannot find the downloadlink. Is it broken?
Posted 17 December 2015 - 18:02
It means the first step in the process of support.
Today we reached the second step: the BSP now builds okay, unfortunately that means the crossepg plugin can't be built anymore.
Now we're going to do some QA tests internally and only when we think the outcome is satisfactory, the images will start building.
on the Glassfibre 1GB DVB-C...
0 members, 31 guests, 0 anonymous users
