Via putty/console and type the lines wte is giving?
Xbox USB Tuner
Started by p.rodrigues, 03 May 2020 14:11
66 replies to this topic
Re: Xbox USB Tuner #21
-
- PLi® Core member
- 57,163 posts
+698
Excellent
Posted 16 May 2020 - 16:40
WaveFrontier 28.2E | 23.5E | 19.2E | 16E | 13E | 10/9E | 7E | 5E | 1W | 4/5W | 15W
Re: Xbox USB Tuner #22
-
- Senior Member
- 125 posts
0
Neutral
Posted 16 May 2020 - 16:51
Oh, sorry, the vu turbo tuner works for me. I think it is an xbox tuner.
Re: Xbox USB Tuner #23
-
- Senior Member
- 125 posts
0
Neutral
Re: Xbox USB Tuner #24
-
- Senior Member
- 125 posts
0
Neutral
Posted 16 May 2020 - 16:58
http://www.kepfeltol...74xboxtuner.png
And if we are here, what is this green icon?
https://kepkuldes.co...ae7fa0ccd11.jpg
And if we are here, what is this green icon?
https://kepkuldes.co...ae7fa0ccd11.jpg
Re: Xbox USB Tuner #25
-
- Forum Moderator
PLi® Core member - 27,494 posts
+397
Excellent
Posted 16 May 2020 - 17:28
It means there are available subchannels. You could have pushed the button yourself, don‘t you think? 
Mijn schotel is een T90 met 10 LNB's. Daarnaast voor de fun nog een draaibaar systeem met een Triax TD 78.
Dreamboxen heb ik niet meer echt actief. Verder heb ik ook nog een een VU+ duo2 met 500Gb harddisk + een VU+ Uno, Zero, Solo 4K, Ultimo 4K, Zero 4K, Uno 4Kse. + ook nog een Xtrend ET7x00. Daarnaast heb ik ook nog diverse andere modellen w.o. een Formuler F4, ET8500, ET7500, Mut@nt 2400HD, Xsarius Fusion HD se en verder nog wel het e.e.a. waarmee op verzoek vanalles wordt getest. Iemand moet het tenslotte doen. 
Los van de eerder genoemde modellen heb ik nog wel een rits aan testsamples als Mut@nt 2400HD, HD60, GB UE4K, GB Trio4K, Maxitec Multibox combo en Twin, Octagon sf8008, sf8008 mini en last but nog least enkele modellen van het Grieks Duitse Edision.
Voor centrale opslag van media gebruik ik een Qnap 219P met tweemaal 2 Tb harddisks + een Synology DS414 met 12 Tb Totale opslag.
-------------------------------------------------------------------------------------------
Many answers to your question can be found in our wiki: Just one click away from this "solutioncentre".
Als ik alles al wist hoefde ik ook niets te vragen. If I had all the knowledge I had no questions at all.
Re: Xbox USB Tuner #26
-
- Senior Member
- 25 posts
0
Neutral
Posted 16 May 2020 - 17:33
http://www.kepfeltol...74xboxtuner.png
And if we are here, what is this green icon?
https://kepkuldes.co...ae7fa0ccd11.jpg
Press the green button....
Edited by p.rodrigues, 16 May 2020 - 17:33.
Vu+ Duo 4K (DVB-S2X FBC + MTISF) - Uno 4K SE (DVB-S2 FBC + Xbox USB Tuner) - 2x Vu+ Zero 4K (DVB-S2X + Vu+ USB Turbo Tuner) - 13E, 19.2E, 30W & ONT/Meo
Re: Xbox USB Tuner #27
-
- Senior Member
- 125 posts
0
Neutral
Posted 16 May 2020 - 17:35
But which button?
I think the 2 green oblong, not the red, green, yellow, blue.
I think the 2 green oblong, not the red, green, yellow, blue.
Re: Xbox USB Tuner #28
-
- Senior Member
- 25 posts
0
Neutral
Posted 16 May 2020 - 17:37
But which button?
I think the 2 green oblong, not the red, green, yellow, blue.
There is only one green button on the RCU ....
Vu+ Duo 4K (DVB-S2X FBC + MTISF) - Uno 4K SE (DVB-S2 FBC + Xbox USB Tuner) - 2x Vu+ Zero 4K (DVB-S2X + Vu+ USB Turbo Tuner) - 13E, 19.2E, 30W & ONT/Meo
Re: Xbox USB Tuner #29
-
- Senior Member
- 125 posts
0
Neutral
Posted 16 May 2020 - 18:12
Yes, it is on my receiver for hotkey, netradio.
How can reach without green button?
How can reach without green button?
Re: Xbox USB Tuner #30
-
- Senior Member
- 125 posts
0
Neutral
Posted 20 May 2020 - 16:40
Do something pli!
Re: Xbox USB Tuner #31
-
- Senior Member
- 25 posts
0
Neutral
Posted 20 May 2020 - 18:41
I don't know anything about drivers, software and maybe that's why I ask the question:
This tuner works on OBH / BH / OpenVIX / OpenATV and possibly on other systems ....
The answer posted here leads us to Vu ... OBH / BH is VuPlus, but the others are not.
Could it be that the solution of the other two teams was also to send users of their images in the same way?
We know that nobody is forced to do anything ... this is a hobby.
I at OpenAtv already had two Xbox connected to a 4K Duo ... I wanted to put the box with OpenPLI but my hardware is not compatible ... or I buy an MTSIF ...
Vu+ Duo 4K (DVB-S2X FBC + MTISF) - Uno 4K SE (DVB-S2 FBC + Xbox USB Tuner) - 2x Vu+ Zero 4K (DVB-S2X + Vu+ USB Turbo Tuner) - 13E, 19.2E, 30W & ONT/Meo
Re: Xbox USB Tuner #32
-
- Senior Member
- 125 posts
0
Neutral
Posted 20 May 2020 - 20:02
I will change my image to opanatv too, because i want to use my tuner.
I hope pli will found solution for this problem, and i will come back if i won't habit that image.
I hope pli will found solution for this problem, and i will come back if i won't habit that image.
Re: Xbox USB Tuner #33
-
- PLi® Core member
- 70,498 posts
+1,810
Excellent
Posted 20 May 2020 - 20:42
I thought this was pretty clear:
https://www.linuxtv....igital_TV_Tuner
First box need to have minimal kernel 4.16 so this means the kernel need to have a patch which added the USB-ID(045e:02d5)
Second need follow packages: MN88472, TDA18250B, DIB0700 and firmware file dvb-usb-dib0700-1.20.fw
So,
- if you have a box with a kernel >= 4.16, you need to install kernel-module-mn88472, kernel-module-tda18250 and enigma2-plugin-drivers-dvb-usb-dib0700
- if you have a box with a kernel < 4.16, you are out of luck, because the kernel needs to be patched, and only the manufacturer can do that
Other images don't have a vendor supported BSP, and can make changes themselfs.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Re: Xbox USB Tuner #34
-
- PLi® Contributor
- 2,498 posts
+64
Good
Posted 21 May 2020 - 05:37
Seems all patches are in the vu+ BSP branch. So you need probably to install all packages.
opkg install kernel-module-mn88472
opkg install firmware-mn8847x
opkg install kernel-module-dvb-usb-dib0700
opkg install firmware-dvb-usb-dib0700-1.20
opkg install kernel-module-tda18250
Many thanks. It shows up. I have not tested the reception yet, but hopefully wont be an issue.
[ 5.322821] dvb-usb: found a 'Microsoft Xbox One Digital TV Tuner' in cold state, will try to load a firmware [ 5.333961] dvb-usb: downloading firmware from file 'dvb-usb-dib0700-1.20.fw' [ 5.405579] dib0700: firmware started successfully. [ 5.482841] brcm-systemport 9300000.ethernet sys0: Link is Up - 1Gbps/Full - flow control off [ 5.910936] dvb-usb: found a 'Microsoft Xbox One Digital TV Tuner' in warm state. [ 5.918626] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. [ 5.927082] DVB: registering new adapter (Microsoft Xbox One Digital TV Tuner) [ 6.092440] mn88472: module is from the staging directory, the quality is unknown, you have been warned. [ 6.103326] mn88472 0-0018: Panasonic MN88472 successfully identified [ 6.113173] tda18250 0-0060: NXP TDA18250BHN/M successfully identified [ 6.121159] usb 1-1.2: DVB: registering adapter 1 frontend 0 (Panasonic MN88472)... [ 6.128930] dvb-usb: Microsoft Xbox One Digital TV Tuner successfully initialized and connected. [ 6.137852] usbcore: registered new interface driver dvb_usb_dib0700
Is there a way to install this through the GUI only?
Attached Files
-
Duo 4K PLI XBOX Tuner.jpg 96.62KB
5 downloads
Edited by Abu Baniaz, 21 May 2020 - 06:25.
Re: Xbox USB Tuner #35
-
- Senior Member
- 125 posts
0
Neutral
Posted 21 May 2020 - 06:40
root@vuuno4kse:~# opkg install kernel-module-mn88472
Couldn't find anything to satisfy 'kernel-module-mn88472'.
No packages installed or removed.
root@vuuno4kse:~# opkg install kernel-module-tda18250
Couldn't find anything to satisfy 'kernel-module-tda18250'.
No packages installed or removed.
root@vuuno4kse:~#
modules:4.1.20-1.9
Re: Xbox USB Tuner #36
-
- PLi® Core member
- 57,163 posts
+698
Excellent
Posted 21 May 2020 - 06:58
...
Edited by littlesat, 21 May 2020 - 06:59.
WaveFrontier 28.2E | 23.5E | 19.2E | 16E | 13E | 10/9E | 7E | 5E | 1W | 4/5W | 15W
Re: Xbox USB Tuner #37
-
- Senior Member
- 25 posts
0
Neutral
Posted 21 May 2020 - 12:00
Seems all patches are in the vu+ BSP branch. So you need probably to install all packages.
opkg install kernel-module-mn88472
opkg install firmware-mn8847x
opkg install kernel-module-dvb-usb-dib0700
opkg install firmware-dvb-usb-dib0700-1.20
opkg install kernel-module-tda18250
Many thanks. It shows up. I have not tested the reception yet, but hopefully wont be an issue.
[ 5.322821] dvb-usb: found a 'Microsoft Xbox One Digital TV Tuner' in cold state, will try to load a firmware [ 5.333961] dvb-usb: downloading firmware from file 'dvb-usb-dib0700-1.20.fw' [ 5.405579] dib0700: firmware started successfully. [ 5.482841] brcm-systemport 9300000.ethernet sys0: Link is Up - 1Gbps/Full - flow control off [ 5.910936] dvb-usb: found a 'Microsoft Xbox One Digital TV Tuner' in warm state. [ 5.918626] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. [ 5.927082] DVB: registering new adapter (Microsoft Xbox One Digital TV Tuner) [ 6.092440] mn88472: module is from the staging directory, the quality is unknown, you have been warned. [ 6.103326] mn88472 0-0018: Panasonic MN88472 successfully identified [ 6.113173] tda18250 0-0060: NXP TDA18250BHN/M successfully identified [ 6.121159] usb 1-1.2: DVB: registering adapter 1 frontend 0 (Panasonic MN88472)... [ 6.128930] dvb-usb: Microsoft Xbox One Digital TV Tuner successfully initialized and connected. [ 6.137852] usbcore: registered new interface driver dvb_usb_dib0700Is there a way to install this through the GUI only?
It is better to test ... it comes to recognize but does not work.
I also have a Uno 4K SE and this one doesn't even recognize it.
These two do not produce results:
Couldn't find anything to satisfy 'kernel-module-mn88472'.
Couldn't find anything to satisfy 'kernel-module-tda18250'.
Vu+ Duo 4K (DVB-S2X FBC + MTISF) - Uno 4K SE (DVB-S2 FBC + Xbox USB Tuner) - 2x Vu+ Zero 4K (DVB-S2X + Vu+ USB Turbo Tuner) - 13E, 19.2E, 30W & ONT/Meo
Re: Xbox USB Tuner #38
-
- PLi® Core member
- 70,498 posts
+1,810
Excellent
Posted 21 May 2020 - 13:11
Is there a way to install this through the GUI only?
There is a package in the drivers section for dib0700, which contains them all except the tda or mn drivers, which (as seen above) are not present on all boxes, so the dependency can't be made.
All packages can be installed via the GUI through software management, package management.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Re: Xbox USB Tuner #39
-
- PLi® Core member
- 70,498 posts
+1,810
Excellent
Posted 21 May 2020 - 13:14
Couldn't find anything to satisfy 'kernel-module-tda18250'.
Couldn't find anything to satisfy 'kernel-module-mn88472'.
None of the VU+ boxes have these available, I assume their kernel defconfig needs updating.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Re: Xbox USB Tuner #40
-
- Senior Member
- 125 posts
0
Neutral
Posted 28 June 2020 - 17:58
Xbox tuner works with the openpli 7.3? Uno4k se.
3 user(s) are reading this topic
0 members, 3 guests, 0 anonymous users
