I forgot .... all this happens with oscam-emu
355 replies to this topic
Re: OpenPLi 7.3 Release available. #121
-
- Senior Member
- 220 posts
+3
Neutral
Posted 26 July 2020 - 08:59
Re: OpenPLi 7.3 Release available. #122
-
- Member
- 11 posts
0
Neutral
Posted 27 July 2020 - 13:10
Zgemma (should have) fixed the driver issues on the H9, there is a new image online.
My Zgemma H9S now boots ok and seems to work fine (no boot logo now?).
But as the first update to 7.3, the RCA out only displays video with no audio. Tested with 7.2 version and works good both video and audio by RCA out.
Driver issue?
Re: OpenPLi 7.3 Release available. #123
-
- Senior Member
- 115 posts
0
Neutral
Posted 27 July 2020 - 15:15
After updating the OpenPli firmware on my Vu+ Duo 4k from version 7.2 to version 7.3 I cannot connect anymore from my notebook with WinSCP (port 21) or telnet (port 23) to the receiver. Ping from my notebook to Vu+ Duo 4k works fine. Also the Internet access from Duo 4k is working. Did any settings changed, do I have to re-enable external access to the Duo 4k box? Are these ports by default blocked in the new OpenPli image?
Re: OpenPLi 7.3 Release available. #124
-
- Senior Member
- 115 posts
0
Neutral
Posted 27 July 2020 - 17:14
Am I really the only one with this problem?
Re: OpenPLi 7.3 Release available. #125
-
- Senior Member
- 25 posts
0
Neutral
Posted 27 July 2020 - 17:52
Am I really the only one with this problem?
And with another (for example DCC)? I have no problem here and I am in the same environment as you.
Vu+ Duo 4K (DVB-S2X FBC + MTISF) - Uno 4K SE (DVB-S2 FBC + Xbox USB Tuner) - 2x Vu+ Zero 4K (DVB-S2X + Vu+ USB Turbo Tuner) - 13E, 19.2E, 30W & ONT/Meo
Re: OpenPLi 7.3 Release available. #126
-
- Senior Member
- 319 posts
+4
Neutral
Posted 27 July 2020 - 20:32
Re: OpenPLi 7.3 Release available. #127
-
- Senior Member
- 115 posts
0
Neutral
Posted 27 July 2020 - 20:39
I updated 7.3 with the today release, reconfigured the WLAN settings, and now the network is working correctly... Weird...
Re: OpenPLi 7.3 Release available. #128
-
- Senior Member
- 115 posts
0
Neutral
Posted 27 July 2020 - 20:43
Is it possible to install a second soft-cam manually on this image version? I have installed oscam-emu from the feed, but I would like to install also the "pure" oscam 1.20 with some special configuration settings that I use to update my local cards. Is it oscam also available on the soft-cam feed? I see only the oscam-emu there.
Re: OpenPLi 7.3 Release available. #129
-
- Forum Moderator
PLi® Core member - 27,487 posts
+397
Excellent
Posted 27 July 2020 - 21:51
Certainly the regular version of Oscam is on the feed. I expect that you already installed it so logically you don’t see it on the feed anymore. Check via menu - plug-ins - red button softcams. If it’s installed it’s there.
Mijn schotel is een T90 met 10 LNB's. Daarnaast voor de fun nog een draaibaar systeem met een Triax TD 78.
Dreamboxen heb ik niet meer echt actief. Verder heb ik ook nog een een VU+ duo2 met 500Gb harddisk + een VU+ Uno, Zero, Solo 4K, Ultimo 4K, Zero 4K, Uno 4Kse. + ook nog een Xtrend ET7x00. Daarnaast heb ik ook nog diverse andere modellen w.o. een Formuler F4, ET8500, ET7500, Mut@nt 2400HD, Xsarius Fusion HD se en verder nog wel het e.e.a. waarmee op verzoek vanalles wordt getest. Iemand moet het tenslotte doen. 
Los van de eerder genoemde modellen heb ik nog wel een rits aan testsamples als Mut@nt 2400HD, HD60, GB UE4K, GB Trio4K, Maxitec Multibox combo en Twin, Octagon sf8008, sf8008 mini en last but nog least enkele modellen van het Grieks Duitse Edision.
Voor centrale opslag van media gebruik ik een Qnap 219P met tweemaal 2 Tb harddisks + een Synology DS414 met 12 Tb Totale opslag.
-------------------------------------------------------------------------------------------
Many answers to your question can be found in our wiki: Just one click away from this "solutioncentre".
Als ik alles al wist hoefde ik ook niets te vragen. If I had all the knowledge I had no questions at all.
Re: OpenPLi 7.3 Release available. #130
-
- Senior Member
- 115 posts
0
Neutral
Posted 28 July 2020 - 08:14
Certainly the regular version of Oscam is on the feed. I expect that you already installed it so logically you don’t see it on the feed anymore. Check via menu - plug-ins - red button softcams. If it’s installed it’s there.
You are right, indeed! Thanks!
Re: OpenPLi 7.3 Release available. #131
-
- Senior Member
- 171 posts
+21
Neutral
Posted 29 July 2020 - 11:59
I put OpenVix 5.0.39 today in flash...OpenPli 7.3 put in 4 slot...After entering the OpenPli 7.3 I can't see any slots....he writes no mimage found in multiboot.....I point out this problem all the time, but it's as if you don't understand or don't want to understand the problem..
I no longer want to test something that makes no sense...
Zgemma H7S
Re: OpenPLi 7.3 Release available. #132
-
- PLi® Core member
- 70,220 posts
+1,798
Excellent
Posted 29 July 2020 - 12:11
Someone with an H7 needs to look at it. As I don't own one, it won't be me.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Re: OpenPLi 7.3 Release available. #133
-
- Forum Moderator
PLi® Core member - 27,487 posts
+397
Excellent
Posted 29 July 2020 - 12:13
@sportfootbol
AFAIK you already received a reply from Wanwizard regarding this specific issue.
Possibly you didn’t receive more detailed answers on your ‘request’ due to the fact that it’s holiday time so more of our members that owe a H7S enjoy their holiday.
I do not own a Zgemma H7s so I am not able to test.
You might also try to put OpenPLi 7.3 in flash and test whether your issue is still present?
Mijn schotel is een T90 met 10 LNB's. Daarnaast voor de fun nog een draaibaar systeem met een Triax TD 78.
Dreamboxen heb ik niet meer echt actief. Verder heb ik ook nog een een VU+ duo2 met 500Gb harddisk + een VU+ Uno, Zero, Solo 4K, Ultimo 4K, Zero 4K, Uno 4Kse. + ook nog een Xtrend ET7x00. Daarnaast heb ik ook nog diverse andere modellen w.o. een Formuler F4, ET8500, ET7500, Mut@nt 2400HD, Xsarius Fusion HD se en verder nog wel het e.e.a. waarmee op verzoek vanalles wordt getest. Iemand moet het tenslotte doen.
Los van de eerder genoemde modellen heb ik nog wel een rits aan testsamples als Mut@nt 2400HD, HD60, GB UE4K, GB Trio4K, Maxitec Multibox combo en Twin, Octagon sf8008, sf8008 mini en last but nog least enkele modellen van het Grieks Duitse Edision.
Voor centrale opslag van media gebruik ik een Qnap 219P met tweemaal 2 Tb harddisks + een Synology DS414 met 12 Tb Totale opslag.
-------------------------------------------------------------------------------------------
Many answers to your question can be found in our wiki: Just one click away from this "solutioncentre".
Als ik alles al wist hoefde ik ook niets te vragen. If I had all the knowledge I had no questions at all.
Re: OpenPLi 7.3 Release available. #134
-
- Senior Member
- 171 posts
+21
Neutral
Posted 29 July 2020 - 12:18
OpenPli 7.2 normally responds to multiboot...OpenPli 7.3 is not compatible with any image-Pure 6.5,OpenAtv 6.4,Open Vix 5.039,
Re: OpenPLi 7.3 Release available. #135
-
- PLi® Core member
- 70,220 posts
+1,798
Excellent
Posted 29 July 2020 - 12:36
It looks like the boxmode code has been removed from the Multiboot code. This could interfere with detection of the multiboot partitions (probably also an issue on the VS1500 then).
So this needs looking at.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Re: OpenPLi 7.3 Release available. #136
-
- Senior Member
- 1,258 posts
+86
Good
Posted 29 July 2020 - 12:36
the other way round, OpenPLi in flash, the others as multiboot
https://forums.openp...dpost&p=1236122
Re: OpenPLi 7.3 Release available. #137
-
- PLi® Core member
- 70,220 posts
+1,798
Excellent
Posted 29 July 2020 - 12:42
That shouldn't be needed if the image currently in flash is of the new multiboot format type.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Re: OpenPLi 7.3 Release available. #138
-
- Senior Member
- 171 posts
+21
Neutral
Posted 29 July 2020 - 12:48
It looks like the boxmode code has been removed from the Multiboot code. This could interfere with detection of the multiboot partitions (probably also an issue on the VS1500 then).
So this needs looking at.
That's right .... Will someone solve this problem ...
OpenPli 7.2 works normally in multiboot..
Re: OpenPLi 7.3 Release available. #139
-
- PLi® Core member
- 70,220 posts
+1,798
Excellent
Posted 29 July 2020 - 13:03
I've checked with the developer.
Between 7.2 and 7.3, the multiboot system has been changed. Together with the vendors and other image makers we have unified the mechanism, instead of every vendor and image maker using their own system.
From that I understand, OE-A images are backwards compatible, and OpenPLi is not.
Which means my initial comments still stand: OpenPLi 7.3+ needs a new multiboot type image in flash. That doesn't have to be OpenPLi, any of the others will do to. But if you have say ATV 6.2 in flash, you'll have this problem.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Re: OpenPLi 7.3 Release available. #140
-
- PLi® Core member
- 70,220 posts
+1,798
Excellent
Posted 29 July 2020 - 13:10
A quick check:
mkdir /tmp/bdev mount /dev/mmcblk0p7 /tmp/bdev ls -l /tmp/bdev umount /tmp/bdev
A new multiboot partition scheme should have directories for STARTUP_LINUX_2_BOXMODE_1, STARTUP_LINUX_3_BOXMODE_1, STARTUP_LINUX_4_BOXMODE_1 and STARTUP_LINUX_2_BOXMODE_12, STARTUP_LINUX_3_BOXMODE_12, STARTUP_LINUX_4_BOXMODE_12.
If it doesn't, or you can't mount that partition, your flashed image is too old.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Also tagged with one or more of these keywords: release
De OpenPLi Release 8.2 is inmiddels beschikbaar in de downloadsectie.Started by Frenske, 23 May 2022  OpenPLi, Release, 8.2
|
|
|
||
info: openpli for Amiko viper 4k v20Started by ness1, 24 Jan 2021 openpli, release, amiko, viper and 1 more...
|
|
|
||
Upgrade VU+ Uno 4k SE 6.1rc --> 6.1 releaseStarted by kemozcwu, 16 Jan 2018 upgrade, VU+ Uno 4k SE, STABLE and 1 more...
|
|
|
||
Release
Open-PLI 1 oder 2Started by no-test, 11 Dec 2010 Release
|
|
|
||
Release
PLi®'s OpenPLi v1.0 Enigma1&2 OpenEmbedded images onlineStarted by hemertje, 24 Sep 2010 Release
|
|
|
11 user(s) are reading this topic
0 members, 11 guests, 0 anonymous users
