OpenVix 5.039 it's in my flash...Give a recommendation on what to put in the flashto have in multiboot Pure 6.5 ,OpenAtv 6.4,OpenVix 5.039 and OpenPli 7.3
Which of these image in the flash..
Posted 29 July 2020 - 13:23
What will happen if the flesh put OpenPLi 7.3?
Secondly, the other slots are put latest published version of images: OpenATV 6.4 or 6.5, Pure 6.5, OpenVIX 5 0 39, etc. What does it mean that they have no new multiboot type?
I think it would be fairer to say that we are trying to OpenPLi not work in multoboot with Pure and maybe some other images. I've gained such an impression ...
I've checked with the developer.
Between 7.2 and 7.3, the multiboot system has been changed. Together with the vendors and other image makers we have unified the mechanism, instead of every vendor and image maker using their own system.
From that I understand, OE-A images are backwards compatible, and OpenPLi is not.
Which means my initial comments still stand: OpenPLi 7.3+ needs a new multiboot type image in flash. That doesn't have to be OpenPLi, any of the others will do to. But if you have say ATV 6.2 in flash, you'll have this problem.
Posted 29 July 2020 - 13:33
As far I'm informed OE-A did adapt the code... the old STARTUP files did include a kind of faulty information. To avoid if box x then do y code in our image it could not be made backwards compatible. Anyway it is also better to switch to the new system instead of keeping the ancient system. Why do you want latest images and forgot to update to the latest multiboot system. When I put a version number on this part nobody is arguing
Edited by littlesat, 29 July 2020 - 13:54.
WaveFrontier 28.2E | 23.5E | 19.2E | 16E | 13E | 10/9E | 7E | 5E | 1W | 4/5W | 15W
Posted 29 July 2020 - 13:52
Flash OpenPLI in flash to get the new system (maybe also flash newer VIX or OPENATV), then reflash the slots again with the images you prefer.
OpenVix 5.039 it's in my flash...Latest version...Slot 2-Pure 6.5 Slot 3-OpenAtv 6.4 Slot 4-OpenPli 7.2 because if I put OpenPli 7.3..and go to the image OpenPli 7.3 i can no longer return to any image because no slot is visible...I talk about it all the time
Posted 29 July 2020 - 17:22
Could you please post the output of the commands I posted? That will show immediately how the flashed image has partitioned the box.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 29 July 2020 - 20:59
OpenVix 5.3.039. in flash...Insert image for the next slot to folder imagebackups..Multiboot see it that way...can also online, except Pure 6.5...Insert the image into the slot 2-Pure 6.5,slot-3 OpenAtv 6.4 and slot -4 OpenPli 7.3...( slot 1-Open Vix 5.3.039)...In any image you enter you see other slots,only in OpenPli 7.3 stands no image found to multiboot ...You can then flash from OpenPli 7.3 with the image from OpenPli 7.2 to slot 4 to see other slots or partitions...
Essentially OpenPli 7.2 recognizes slots (partitions),OpenPli 7.3 does not see after inserting into any slot...
Crash log does not exist..
Posted 29 July 2020 - 21:11
Could you please post the output of the commands I posted? That will show immediately how the flashed image has partitioned the box.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 29 July 2020 - 22:14
A quick check:
mkdir /tmp/bdev mount /dev/mmcblk0p7 /tmp/bdev ls -l /tmp/bdev umount /tmp/bdevA new multiboot partition scheme should have directories for STARTUP_LINUX_2_BOXMODE_1, STARTUP_LINUX_3_BOXMODE_1, STARTUP_LINUX_4_BOXMODE_1 and STARTUP_LINUX_2_BOXMODE_12, STARTUP_LINUX_3_BOXMODE_12, STARTUP_LINUX_4_BOXMODE_12.
If it doesn't, or you can't mount that partition, your flashed image is too old.
Posted 29 July 2020 - 23:10
That looks odd. I've asked the developer for feedback.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 30 July 2020 - 06:30
Edited by littlesat, 30 July 2020 - 06:32.
WaveFrontier 28.2E | 23.5E | 19.2E | 16E | 13E | 10/9E | 7E | 5E | 1W | 4/5W | 15W
Posted 30 July 2020 - 19:53
No, it is not. So let me repeat yet again:
You need an image in flash that uses the new partition scheme. And to get an image in flash, you need to flash the USB image. Flashing a multiboot image in slot 1 is NOT the same!!!
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
De OpenPLi Release 8.2 is inmiddels beschikbaar in de downloadsectie.Started by Frenske, 23 May 2022 OpenPLi, Release, 8.2 |
|
|||
info: openpli for Amiko viper 4k v20Started by ness1, 24 Jan 2021 openpli, release, amiko, viper and 1 more... |
|
|||
Upgrade VU+ Uno 4k SE 6.1rc --> 6.1 releaseStarted by kemozcwu, 16 Jan 2018 upgrade, VU+ Uno 4k SE, STABLE and 1 more... |
|
|||
Release
Open-PLI 1 oder 2Started by no-test, 11 Dec 2010 Release |
|
|||
Release
PLi®'s OpenPLi v1.0 Enigma1&2 OpenEmbedded images onlineStarted by hemertje, 24 Sep 2010 Release |
|
0 members, 10 guests, 0 anonymous users