Hey guys !
I have problem with lcd4linux at Openpli 8.0 (zgemma h9s se). After installation I gets this error: "No module named Image". Any help would be greatly appreciated.
28 replies to this topic
Re: Lcd4linux problem #2
-
- Senior Member
- 5,516 posts
+115
Excellent
Posted 5 August 2021 - 16:00
Do you use an external display? Thé Zgemma had no build in LCD...
Met één been in het graf..... Helaas
Re: Lcd4linux problem #3
-
- New Member
- 4 posts
0
Neutral
Posted 5 August 2021 - 16:04
Yes I use Samsung photo frame spf 87h. I run it correctly with openatv but I want it usable at openpli.
Re: Lcd4linux problem #4
-
- PLi® Core member
- 7,185 posts
+323
Excellent
Posted 5 August 2021 - 16:49
Try to install python-image via telnet:
opkg update
opkg install python-image
Xtrend ET-9200, ET-8000, ET-10000, OpenPliPC on Ubuntu 12.04
Re: Lcd4linux problem #5
-
- Senior Member
- 137 posts
0
Neutral
Posted 5 August 2021 - 17:47
I have the same on my new Vu Duo 4K SE and also on Ultimo 4K , I was going to start a topic here concerning , why this great plugin Lcd4Linux doesn't work anymore on the best receivers ???? On Ultimo 4K clock and picons are too small on open pli 8.0 than on Duo 4K SE !!! This is stupid so on larger screen Ultimo 4K elements are so small.This plugin might solved this silly problem.
Sony OLED 83' A90J 
Panasonic UHD UB9000 , DENON AVC-A1H, Atmos 7.1.4 , VU+ DUO 4K SE ,VU+ Ultimo 4K Full config, 180 cm Parabolic DISH/ Dual LNB - Full orbit 75E-45W , 80 cm offset dish with unicable LNB for Hot Bird. Humax Icord HD , DUNE HD Max Vision 4K.
Re: Lcd4linux problem #6
-
- PLi® Contributor
- 6,178 posts
+261
Excellent
Posted 5 August 2021 - 18:04
@ROMAN42
VU+ LCD skin has been reworked, you can try OpenPLI Nightly Build to check if you are now satisfied with the VU+ LCD Display.
NO SUPPORT by PM, it is a forum make your question public so everybody can benefit from the question/answer.
If you think that my answer helps you, you can press the up arrow in bottom right of the answer.
Wanna help with OpenPLi Translation? Please read our Wiki Information for translators
Sat: Hotbird 13.0E, Astra 19.2E, Eutelsat5A 5.0W
VU+ Solo 4K: 2*DVB-S2 + 2*DVB-C/T/T2 (used in DVB-C) & Duo 4K: 2*DVB-S2X + DVB-C (FBC)
AB-Com: PULSe 4K 1*DVB-S2X (+ DVB-C/T/T2)
Edision OS Mio 4K: 1*DVB-S2X + 1*DVB-C/T/T2
Re: Lcd4linux problem #7
-
- New Member
- 4 posts
0
Neutral
Posted 5 August 2021 - 18:15
Try to install python-image via telnet:
opkg update
opkg install python-image
Thanks for advice but don't work for me. Any other solutions?
Re: Lcd4linux problem #8
-
- Senior Member
- 137 posts
0
Neutral
Posted 5 August 2021 - 18:22
Ok i will try it and send my thought about it.Thanks.@ROMAN42
VU+ LCD skin has been reworked, you can try OpenPLI Nightly Build to check if you are now satisfied with the VU+ LCD Display.
Sony OLED 83' A90J Panasonic UHD UB9000 , DENON AVC-A1H, Atmos 7.1.4 , VU+ DUO 4K SE ,VU+ Ultimo 4K Full config, 180 cm Parabolic DISH/ Dual LNB - Full orbit 75E-45W , 80 cm offset dish with unicable LNB for Hot Bird. Humax Icord HD , DUNE HD Max Vision 4K.
Re: Lcd4linux problem #9
-
- Senior Member
- 137 posts
0
Neutral
Posted 5 August 2021 - 18:43
Ok i just try latest night build for Ultimo 4k and i don' t see any differance !! Plugin also not make any changes , however seems to displays different values but they don't do any modifications.
Sony OLED 83' A90J Panasonic UHD UB9000 , DENON AVC-A1H, Atmos 7.1.4 , VU+ DUO 4K SE ,VU+ Ultimo 4K Full config, 180 cm Parabolic DISH/ Dual LNB - Full orbit 75E-45W , 80 cm offset dish with unicable LNB for Hot Bird. Humax Icord HD , DUNE HD Max Vision 4K.
Re: Lcd4linux problem #10
-
- PLi® Contributor
- 6,178 posts
+261
Excellent
Posted 5 August 2021 - 19:52
Which skin are you using?
NO SUPPORT by PM, it is a forum make your question public so everybody can benefit from the question/answer.
If you think that my answer helps you, you can press the up arrow in bottom right of the answer.
Wanna help with OpenPLi Translation? Please read our Wiki Information for translators
Sat: Hotbird 13.0E, Astra 19.2E, Eutelsat5A 5.0W
VU+ Solo 4K: 2*DVB-S2 + 2*DVB-C/T/T2 (used in DVB-C) & Duo 4K: 2*DVB-S2X + DVB-C (FBC)
AB-Com: PULSe 4K 1*DVB-S2X (+ DVB-C/T/T2)
Edision OS Mio 4K: 1*DVB-S2X + 1*DVB-C/T/T2
Re: Lcd4linux problem #11
-
- Senior Member
- 137 posts
0
Neutral
Posted 5 August 2021 - 22:42
Pli Full night Hd
Sony OLED 83' A90J Panasonic UHD UB9000 , DENON AVC-A1H, Atmos 7.1.4 , VU+ DUO 4K SE ,VU+ Ultimo 4K Full config, 180 cm Parabolic DISH/ Dual LNB - Full orbit 75E-45W , 80 cm offset dish with unicable LNB for Hot Bird. Humax Icord HD , DUNE HD Max Vision 4K.
Re: Lcd4linux problem #12
-
- PLi® Contributor
- 6,178 posts
+261
Excellent
Posted 6 August 2021 - 07:37
Can you take a photo of the LCD screen to show us what you are complaining about?
NO SUPPORT by PM, it is a forum make your question public so everybody can benefit from the question/answer.
If you think that my answer helps you, you can press the up arrow in bottom right of the answer.
Wanna help with OpenPLi Translation? Please read our Wiki Information for translators
Sat: Hotbird 13.0E, Astra 19.2E, Eutelsat5A 5.0W
VU+ Solo 4K: 2*DVB-S2 + 2*DVB-C/T/T2 (used in DVB-C) & Duo 4K: 2*DVB-S2X + DVB-C (FBC)
AB-Com: PULSe 4K 1*DVB-S2X (+ DVB-C/T/T2)
Edision OS Mio 4K: 1*DVB-S2X + 1*DVB-C/T/T2
Re: Lcd4linux problem #13
-
- PLi® Contributor
- 2,496 posts
+64
Good
Posted 6 August 2021 - 14:43
I am not using Linux4LCD plugin, here is a picture of the LCD on the front panel of my Duo 4K. I am also using PLI Full night HD
Attached Files
-
IMG_20210806_143935.jpg 63.46KB
10 downloads
Re: Lcd4linux problem #14
-
- PLi® Core member
- 70,371 posts
+1,807
Excellent
Posted 6 August 2021 - 15:20
There are now two different discussions running in parallel here. Not handy, please open a new topic for a new problem.
Thanks for advice but don't work for me. Any other solutions?
Does that mean the error is still the same?
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Re: Lcd4linux problem #15
-
- Senior Member
- 137 posts
0
Neutral
Posted 6 August 2021 - 17:27
I am not using Linux4LCD plugin, here is a picture of the LCD on the front panel of my Duo 4K. I am also using PLI Full night HD
On Ultimo 4k looks like this and main reason to complain is in stand by mode.
Sony OLED 83' A90J Panasonic UHD UB9000 , DENON AVC-A1H, Atmos 7.1.4 , VU+ DUO 4K SE ,VU+ Ultimo 4K Full config, 180 cm Parabolic DISH/ Dual LNB - Full orbit 75E-45W , 80 cm offset dish with unicable LNB for Hot Bird. Humax Icord HD , DUNE HD Max Vision 4K.
Re: Lcd4linux problem #16
-
- Senior Member
- 5,516 posts
+115
Excellent
Posted 6 August 2021 - 18:26
But what exactly is the problem? Standby screen is defined by the skin. What do you want on your standby screen when the box is in standby?
Met één been in het graf..... Helaas
Re: Lcd4linux problem #17
-
- Senior Member
- 137 posts
0
Neutral
Posted 6 August 2021 - 19:09
in a nutshell , i want the same proportion on lcd in stand by and working mode like those use on Duo 4K SE .Ultimo 4k screen is larger and clock is too small in stand by mode. Also rec icon should be larger and picon. I watch tv from 3,5 meter and vu screen is harder to read.
Edited by ROMAN42, 6 August 2021 - 19:12.
Sony OLED 83' A90J Panasonic UHD UB9000 , DENON AVC-A1H, Atmos 7.1.4 , VU+ DUO 4K SE ,VU+ Ultimo 4K Full config, 180 cm Parabolic DISH/ Dual LNB - Full orbit 75E-45W , 80 cm offset dish with unicable LNB for Hot Bird. Humax Icord HD , DUNE HD Max Vision 4K.
Re: Lcd4linux problem #18
-
- PLi® Contributor
- 6,178 posts
+261
Excellent
Posted 6 August 2021 - 19:21
The LCD is not displaying the same informations when in operation than when in stand by, so it is the normal the screen are different and the clock is smaller in operation.
If you search on the forum use google with search pattern site:openpli.org
And you will find where the front LCD display skin.xml is located and you can start tuning it to fit your needs.
NO SUPPORT by PM, it is a forum make your question public so everybody can benefit from the question/answer.
If you think that my answer helps you, you can press the up arrow in bottom right of the answer.
Wanna help with OpenPLi Translation? Please read our Wiki Information for translators
Sat: Hotbird 13.0E, Astra 19.2E, Eutelsat5A 5.0W
VU+ Solo 4K: 2*DVB-S2 + 2*DVB-C/T/T2 (used in DVB-C) & Duo 4K: 2*DVB-S2X + DVB-C (FBC)
AB-Com: PULSe 4K 1*DVB-S2X (+ DVB-C/T/T2)
Edision OS Mio 4K: 1*DVB-S2X + 1*DVB-C/T/T2
Re: Lcd4linux problem #19
-
- Senior Member
- 137 posts
0
Neutral
Posted 6 August 2021 - 19:50
Ok thanks i will try to fit for my needs.
Sony OLED 83' A90J Panasonic UHD UB9000 , DENON AVC-A1H, Atmos 7.1.4 , VU+ DUO 4K SE ,VU+ Ultimo 4K Full config, 180 cm Parabolic DISH/ Dual LNB - Full orbit 75E-45W , 80 cm offset dish with unicable LNB for Hot Bird. Humax Icord HD , DUNE HD Max Vision 4K.
Re: Lcd4linux problem #20
-
- Guest
- 396 posts
+2
Neutral
Posted 6 August 2021 - 22:40
The Friends of PLi should have all the decoders to fix everything, but it is not possible. Decoders that have a display like our vu + unfortunately need help from those who own it. For example, I have a 4K one if I worked on the .xml file to optimize everything. In your case you should do this job and turn them the optimized file like I did, in fact it was put in the reposity as good.in a nutshell , i want the same proportion on lcd in stand by and working mode like those use on Duo 4K SE .Ultimo 4k screen is larger and clock is too small in stand by mode. Also rec icon should be larger and picon. I watch tv from 3,5 meter and vu screen is harder to read.
Il mio telefono!
Also tagged with one or more of these keywords: openpli 8.0, lcd4linux, error
Mutant HD60 werkt niet meerStarted by vikinger1953, 1 Jul 2021  Openpli 8.0
|
|
|
||
Worden VU+ Duo2 en SoloSE nog ondersteunt?Started by Lutz, 29 Jun 2021 OpenPLi 8.0
|
|
|
||
favorieten over een of twee regels: hoe omschakelen?Started by Lutz, 20 Jun 2021 openpli 8.0
|
|
|
||
Afstemmen mislukt soms van T2 naar SatStarted by sirius, 15 Jan 2021 OpenPLi 8.0
|
|
|
||
iptables error (modinfo module not found)Started by ReceiverM, 14 Dec 2020 iptables, kernel, error, module and 1 more...
|
|
|
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
