Thank for the link i think it is a old version that only transcode to hdmi.
Iám looking for the leatest transcode source from oe-aliance what i found
is the original from vu+
Posted 24 July 2023 - 16:51
Thank for the link i think it is a old version that only transcode to hdmi.
Iám looking for the leatest transcode source from oe-aliance what i found
is the original from vu+
Posted 24 July 2023 - 19:05
Pfff i have found the problem ,the different between GB and VU
Gb use a extra pid
HAVE_EXT_PID is for GB
els for VU
Edited by luisteraar, 24 July 2023 - 19:06.
Posted 24 July 2023 - 19:08
PR ?
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 24 July 2023 - 19:13
I don't care about this plugin, which, as mentioned before, should not be needed in OpenPLi as OpenPLi does transcoding internally.
So if that doesn't work in OpenPLi on a GB, it needs to be fixed in OpenPLi, instead of constantly coming up with workarounds in plugins.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 24 July 2023 - 19:20
Ok.
If so, then we're back to "why is this plugin needed anyway" ?
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 24 July 2023 - 19:20
I don't care about this plugin, which, as mentioned before, should not be needed in OpenPLi as OpenPLi does transcoding internally.
So if that doesn't work in OpenPLi on a GB, it needs to be fixed in OpenPLi, instead of constantly coming up with workarounds in plugins.
That depends whether this is caused by outdated GB drivers. As we are aware GB doesn’t offer us any BSP updates since long ago.
Mijn schotel is een T90 met 10 LNB's. Daarnaast voor de fun nog een draaibaar systeem met een Triax TD 78.
Dreamboxen heb ik niet meer echt actief. Verder heb ik ook nog een een VU+ duo2 met 500Gb harddisk + een VU+ Uno, Zero, Solo 4K, Ultimo 4K, Zero 4K, Uno 4Kse. + ook nog een Xtrend ET7x00. Daarnaast heb ik ook nog diverse andere modellen w.o. een Formuler F4, ET8500, ET7500, Mut@nt 2400HD, Xsarius Fusion HD se en verder nog wel het e.e.a. waarmee op verzoek vanalles wordt getest. Iemand moet het tenslotte doen.
Los van de eerder genoemde modellen heb ik nog wel een rits aan testsamples als Mut@nt 2400HD, HD60, GB UE4K, GB Trio4K, Maxitec Multibox combo en Twin, Octagon sf8008, sf8008 mini en last but nog least enkele modellen van het Grieks Duitse Edision.
Voor centrale opslag van media gebruik ik een Qnap 219P met tweemaal 2 Tb harddisks + een Synology DS414 met 12 Tb Totale opslag.
-------------------------------------------------------------------------------------------
Many answers to your question can be found in our wiki: Just one click away from this "solutioncentre".
Als ik alles al wist hoefde ik ook niets te vragen. If I had all the knowledge I had no questions at all.
Posted 24 July 2023 - 23:14
What is internet transcode? Afaik no box can hardware transcode an internet stream?
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 26 July 2023 - 17:05
stick to the truth.
i just said transcode doesn't work on gigablue .
If it doesn't work, it's crap
oe-aliance has a good working .
my question was can it get into the feed.
No more and no less.
It means the interface and implementation on GB is "crap" "no more and no less", in your words. If you can point me to the code which needs to be changed to be "compliant" with the deviating interface of GB and it still remains fully working on VU+, I'll happily change it.
Obviously you don't have a clue. The difference in IOCTL ids is between older and newer versions of the Broadcom SDK. It has nothing to do with VU+ or GB. There is no way to know from the code, so it will try both. And obviously, it the old SDK is used in the drivers (probable with GB), then the first try will give an error. The next try with the old ID will succeed, no problems there.
The amount of transcoders is also something you got completely wrong. It's dependent on the hardware and the drivers. Here also there is no other way to know than simply try, as VU+ (and GB probably too) will always create two transcoding devices, even if only one is supported, so some "internal" errors are to be expected.
Also, are we talking about the streamproxy here, or the broadcom transcoding I built into enigma? It's a whole different world.
IIRC we already added the original VU+ transstreamproxy in the feed long ago, for those who like to try their luck. It's an executable, not a plugin. The plugin is just to satisfy the OWIF.
Edited by Erik Slagter, 26 July 2023 - 17:12.
* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.
Posted 26 July 2023 - 17:52
Many thanks for the awnser
ik mis reply on mij last post
i think i found the problem.it looks like gigablue only has 1 decoder vu 4can someone check this in /proc/stb/encoder/the openpli method occupies 2 encoders per transcodestreamproxy only uses 1 because it gets the input with stream from local host.
If I start transcode op GB ik got the error
[eEncoder] no encoders free
it is generated here
Edited by luisteraar, 26 July 2023 - 17:53.
Posted 26 July 2023 - 19:53
The support for transcoding for Broadcom (VU+, GB...) within Enigma is highly experimental, for two reasons:
- there are (of course undocumented) differences in the interfaces between VU+ and GB (and other manufacturers) that make it difficult to make it work on all of them. Change it to work on one, it stops working on another.
- the interface of the "Xtrend" transcoding, which is supported by enigma natively, is quite different to the Broadcom one. It's not so hard to implement in Enigma because a lot of the work is already done within the hardware and drivers. Adding Broadcom support to enigma was non-trivial because there are critically timed required parallel sections, which is hard to implement in the framework of Enigma. Also the Enigma framework is supplying functions for recording from a demuxer device to a file device, which perfectly fits the "Xtrend" transcoding interface. It doesn't fit the Broadcom interface, let me assure you. I've had to make changes in the recording code that broke normal recording at totally random events, but only one some receivers, which of course is unacceptable. I now have it on a level where normal recording doesn't seem to break, so I am not to keen on making changes there. What needs to be done is duplicate the recording framework of Enigma and tailor it for transcoding, so they do not share code anymore. That's not so easy as it sounds because there are hardcoded assumptions sprinkled all over the code in Enigma, so that all would need to be fixed. Personally I am not up to that task. If someone with a thorough understanding of the internals of Enigma would step up, I'd gladly join though.
So in short, for Xtrend type transcoding, use the internal Enigma support. For VU+ the internal Enigma support should be fine too, but may be a little less robust than the streamproxy. Otherwise, and for GB, use streamproxy. If it doesn't work on GB, and someone can point me to the culprit there, I'd happily make a workaround. Streamproxy was from the start designed to be fully parameterised (i.o.w. designed for workarounding) and it should be possible to create a workaround one way or another, without affecting other manufacturer's functionality.
* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.
Posted 26 July 2023 - 20:09
Edited by luisteraar, 26 July 2023 - 20:12.
Posted 27 July 2023 - 13:57
It's time to work more on de drivers.
Posted 27 July 2023 - 14:55
You can forget it being GPL, whatever is shown. The Broadcom SDK has one of the strickest NDA's in the business.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 27 July 2023 - 18:28
Have you actuially checked what it is?
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
![]() Missing Softcams PluginStarted by MifPT, 12 Jan 2024 ![]() |
|
![]() |
||
openpli 9 and Xtream pluginStarted by frossie, 10 Dec 2023 ![]() |
|
![]() |
||
![]() Plugin - Power LNB/ToneBurst in standby for FBC tunersStarted by Dimitrij, 6 Apr 2022 ![]() |
|
![]() |
||
imdb plugin
![]() IMDB plugin issuesStarted by scriptmelvin †, 1 Jun 2021 ![]() |
|
![]() |
||
![]() Streamlink [-27] InstallerStarted by dreamboxco, 2 Apr 2021 ![]() |
|
![]() |
0 members, 0 guests, 0 anonymous users