Jump to content


Photo

OpenPli 8.2 Release online in the downloadsection.

Started by gspock, 22 May 2022 13:47

  • Please log in to reply
152 replies to this topic

Re: OpenPli 8.2 Release online in the downloadsection. #61 WanWizard

  • PLi® Core member
  • 70,453 posts

+1,809
Excellent

Posted 5 June 2022 - 21:39

If it happens on every restart, restart Enigma in debug mode, and post the debuglog here, from /home/root.


Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)

Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.

Many answers to your question can be found in our new and improved wiki.

Re: OpenPli 8.2 Release online in the downloadsection. #62 oskardto

  • Member
  • 10 posts

0
Neutral

Posted 5 June 2022 - 21:52

Debug log is very big (46Mb)

There is last xx lines:

Getting attribute  netmask  for adapter wg0
nameservers: [[192, 168, 1, 1], [8, 8, 8, 8]]
read configured interface: {}
self.ifaces after loading: {'wg0': {'preup': False, 'predown': False, 'ip': [0, 0, 0, 0], 'up': True, 'netmask': [0, 0, 0, 0], 'dhcp': True, 'gateway': [0, 0, 0, 0]}, 'wlan3': {'preup': '\tpre-up wl-config.sh -m unencrypted -k ********* -s "artcom_6633" \n', 'predown': '\tpost-down wl-down.sh\n', 'ip': [0, 0, 0, 0], 'up': False, 'netmask': [0, 0, 0, 0], 'dhcp': True, 'gateway': [0, 0, 0, 0]}, 'eth0': {'preup': False, 'predown': False, 'ip': [192, 168, 1, 45], 'up': True, 'mac': u'00:1d:ec:17:2f:c6', 'netmask': [255, 255, 255, 0], 'dhcp': False, 'bcast': [192, 168, 1, 45], 'gateway': [192, 168, 1, 1]}}
Getting attribute  gateway  for adapter wg0
nameservers: [[192, 168, 1, 1], [8, 8, 8, 8]]
read configured interface: {}
self.ifaces after loading: {'wg0': {'preup': False, 'predown': False, 'ip': [0, 0, 0, 0], 'up': True, 'netmask': [0, 0, 0, 0], 'dhcp': True, 'gateway': [0, 0, 0, 0]}, 'wlan3': {'preup': '\tpre-up wl-config.sh -m unencrypted -k ********* -s "artcom_6633" \n', 'predown': '\tpost-down wl-down.sh\n', 'ip': [0, 0, 0, 0], 'up': False, 'netmask': [0, 0, 0, 0], 'dhcp': True, 'gateway': [0, 0, 0, 0]}, 'eth0': {'preup': False, 'predown': False, 'ip': [192, 168, 1, 45], 'up': True, 'mac': u'00:1d:ec:17:2f:c6', 'netmask': [255, 255, 255, 0], 'dhcp': False, 'bcast': [192, 168, 1, 45], 'gateway': [192, 168, 1, 1]}}
Getting attribute  mac  for adapter wg0
nameservers: [[192, 168, 1, 1], [8, 8, 8, 8]]
read configured interface: {}
self.ifaces after loading: {'wg0': {'preup': False, 'predown': False, 'ip': [0, 0, 0, 0], 'up': True, 'netmask': [0, 0, 0, 0], 'dhcp': True, 'gateway': [0, 0, 0, 0]}, 'wlan3': {'preup': '\tpre-up wl-config.sh -m unencrypted -k ********* -s "artcom_6633" \n', 'predown': '\tpost-down wl-down.sh\n', 'ip': [0, 0, 0, 0], 'up': False, 'netmask': [0, 0, 0, 0], 'dhcp': True, 'gateway': [0, 0, 0, 0]}, 'eth0': {'preup': False, 'predown': False, 'ip': [192, 168, 1, 45], 'up': True, 'mac': u'00:1d:ec:17:2f:c6', 'netmask': [255, 255, 255, 0], 'dhcp': False, 'bcast': [192, 168, 1, 45], 'gateway': [192, 168, 1, 1]}}
Getting attribute  dhcp  for adapter wg0
nameservers: [[192, 168, 1, 1], [8, 8, 8, 8]]
read configured interface: {}
self.ifaces after loading: {'wg0': {'preup': False, 'predown': False, 'ip': [0, 0, 0, 0], 'up': True, 'netmask': [0, 0, 0, 0], 'dhcp': True, 'gateway': [0, 0, 0, 0]}, 'wlan3': {'preup': '\tpre-up wl-config.sh -m unencrypted -k ********* -s "artcom_6633" \n', 'predown': '\tpost-down wl-down.sh\n', 'ip': [0, 0, 0, 0], 'up': False, 'netmask': [0, 0, 0, 0], 'dhcp': True, 'gateway': [0, 0, 0, 0]}, 'eth0': {'preup': False, 'predown': False, 'ip': [192, 168, 1, 45], 'up': True, 'mac': u'00:1d:ec:17:2f:c6', 'netmask': [255, 255, 255, 0], 'dhcp': False, 'bcast': [192, 168, 1, 45], 'gateway': [192, 168, 1, 1]}}
Getting attribute  ip  for adapter wg0
nameservers: [[192, 168, 1, 1], [8, 8, 8, 8]]
read configured interface: {}
self.ifaces after loading: {'wg0': {'preup': False, 'predown': False, 'ip': [0, 0, 0, 0], 'up': True, 'netmask': [0, 0, 0, 0], 'dhcp': True, 'gateway': [0, 0, 0, 0]}, 'wlan3': {'preup': '\tpre-up wl-config.sh -m unencrypted -k ********* -s "artcom_6633" \n', 'predown': '\tpost-down wl-down.sh\n', 'ip': [0, 0, 0, 0], 'up': False, 'netmask': [0, 0, 0, 0], 'dhcp': True, 'gateway': [0, 0, 0, 0]}, 'eth0': {'preup': False, 'predown': False, 'ip': [192, 168, 1, 45], 'up': True, 'mac': u'00:1d:ec:17:2f:c6', 'netmask': [255, 255, 255, 0], 'dhcp': False, 'bcast': [192, 168, 1, 45], 'gateway': [192, 168, 1, 1]}}
Getting attribute  netmask  for adapter wg0
nameservers: [[192, 168, 1, 1], [8, 8, 8, 8]]
read configured interface: {}
self.ifaces after loading: {'wg0': {'preup': False, 'predown': False, 'ip': [0, 0, 0, 0], 'up': True, 'netmask': [0, 0, 0, 0], 'dhcp': True, 'gateway': [0, 0, 0, 0]}, 'wlan3': {'preup': '\tpre-up wl-config.sh -m unencrypted -k ********* -s "artcom_6633" \n', 'predown': '\tpost-down wl-down.sh\n', 'ip': [0, 0, 0, 0], 'up': False, 'netmask': [0, 0, 0, 0], 'dhcp': True, 'gateway': [0, 0, 0, 0]}, 'eth0': {'preup': False, 'predown': False, 'ip': [192, 168, 1, 45], 'up': True, 'mac': u'00:1d:ec:17:2f:c6', 'netmask': [255, 255, 255, 0], 'dhcp': False, 'bcast': [192, 168, 1, 45], 'gateway': [192, 168, 1, 1]}}
Getting attribute  netmask  for adapter wg0
nameservers: [[192, 168, 1, 1], [8, 8, 8, 8]]
read configured interface: {}
self.ifaces after loading: {'wg0': {'preup': False, 'predown': False, 'ip': [0, 0, 0, 0], 'up': True, 'netmask': [0, 0, 0, 0], 'dhcp': True, 'gateway': [0, 0, 0, 0]}, 'wlan3': {'preup': '\tpre-up wl-config.sh -m unencrypted -k ********* -s "artcom_6633" \n', 'predown': '\tpost-down wl-down.sh\n', 'ip': [0, 0, 0, 0], 'up': False, 'netmask': [0, 0, 0, 0], 'dhcp': True, 'gateway': [0, 0, 0, 0]}, 'eth0': {'preup': False, 'predown': False, 'ip': [192, 168, 1, 45], 'up': True, 'mac': u'00:1d:ec:17:2f:c6', 'netmask': [255, 255, 255, 0], 'dhcp': False, 'bcast': [192, 168, 1, 45], 'gateway': [192, 168, 1, 1]}}
Getting attribute  gateway  for adapter wg0
nameservers: [[192, 168, 1, 1], [8, 8, 8, 8]]
read configured interface: {}
self.ifaces after loading: {'wg0': {'preup': False, 'predown': False, 'ip': [0, 0, 0, 0], 'up': True, 'netmask': [0, 0, 0, 0], 'dhcp': True, 'gateway': [0, 0, 0, 0]}, 'wlan3': {'preup': '\tpre-up wl-config.sh -m unencrypted -k ********* -s "artcom_6633" \n', 'predown': '\tpost-down wl-down.sh\n', 'ip': [0, 0, 0, 0], 'up': False, 'netmask': [0, 0, 0, 0], 'dhcp': True, 'gateway': [0, 0, 0, 0]}, 'eth0': {'preup': False, 'predown': False, 'ip': [192, 168, 1, 45], 'up': True, 'mac': u'00:1d:ec:17:2f:c6', 'netmask': [255, 255, 255, 0], 'dhcp': False, 'bcast': [192, 168, 1, 45], 'gateway': [192, 168, 1, 1]}}
Getting attribute  mac  for adapter wg0
nameservers: [[192, 168, 1, 1], [8, 8, 8, 8]]
read configured interface: {}
self.ifaces after loading: {'wg0': {'preup': False, 'predown': False, 'ip': [0, 0, 0, 0], 'up': True, 'netmask': [0, 0, 0, 0], 'dhcp': True, 'gateway': [0, 0, 0, 0]}, 'wlan3': {'preup': '\tpre-up wl-config.sh -m unencrypted -k ********* -s "artcom_6633" \n', 'predown': '\tpost-down wl-down.sh\n', 'ip': [0, 0, 0, 0], 'up': False, 'netmask': [0, 0, 0, 0], 'dhcp': True, 'gateway': [0, 0, 0, 0]}, 'eth0': {'preup': False, 'predown': False, 'ip': [192, 168, 1, 45], 'up': True, 'mac': u'00:1d:ec:17:2f:c6', 'netmask': [255, 255, 255, 0], 'dhcp': False, 'bcast': [192, 168, 1, 45], 'gateway': [192, 168, 1, 1]}}
Getting attribute  dhcp  for adapter wg0
nameservers: [[192, 168, 1, 1], [8, 8, 8, 8]]
read configured interface: {}
self.ifaces after loading: {'wg0': {'preup': False, 'predown': False, 'ip': [0, 0, 0, 0], 'up': True, 'netmask': [0, 0, 0, 0], 'dhcp': True, 'gateway': [0, 0, 0, 0]}, 'wlan3': {'preup': '\tpre-up wl-config.sh -m unencrypted -k ********* -s "artcom_6633" \n', 'predown': '\tpost-down wl-down.sh\n', 'ip': [0, 0, 0, 0], 'up': False, 'netmask': [0, 0, 0, 0], 'dhcp': True, 'gateway': [0, 0, 0, 0]}, 'eth0': {'preup': False, 'predown': False, 'ip': [192, 168, 1, 45], 'up': True, 'mac': u'00:1d:ec:17:2f:c6', 'netmask': [255, 255, 255, 0], 'dhcp': False, 'bcast': [192, 168, 1, 45], 'gateway': [192, 168, 1, 1]}}
Getting attribute  ip  for adapter wg0
nameservers: [[192, 168, 1, 1], [8, 8, 8, 8]]
read configured interface: {}
self.ifaces after loading: {'wg0': {'preup': False, 'predown': False, 'ip': [0, 0, 0, 0], 'up': True, 'netmask': [0, 0, 0, 0], 'dhcp': True, 'gateway': [0, 0, 0, 0]}, 'wlan3': {'preup': '\tpre-up wl-config.sh -m unencrypted -k ********* -s "artcom_6633" \n', 'predown': '\tpost-down wl-down.sh\n', 'ip': [0, 0, 0, 0], 'up': False, 'netmask': [0, 0, 0, 0], 'dhcp': True, 'gateway': [0, 0, 0, 0]}, 'eth0': {'preup': False, 'predown': False, 'ip': [192, 168, 1, 45], 'up': True, 'mac': u'00:1d:ec:17:2f:c6', 'netmask': [255, 255, 255, 0], 'dhcp': False, 'bcast': [192, 168, 1, 45], 'gateway': [192, 168, 1, 1]}}
Getting attribute  netmask  for adapter wg0
nameservers: [[192, 168, 1, 1], [8, 8, 8, 8]]
read configured interface: {}
self.ifaces after loading: {'wg0': {'preup': False, 'predown': False, 'ip': [0, 0, 0, 0], 'up': True, 'netmask': [0, 0, 0, 0], 'dhcp': True, 'gateway': [0, 0, 0, 0]}, 'wlan3': {'preup': '\tpre-up wl-config.sh -m unencrypted -k ********* -s "artcom_6633" \n', 'predown': '\tpost-down wl-down.sh\n', 'ip': [0, 0, 0, 0], 'up': False, 'netmask': [0, 0, 0, 0], 'dhcp': True, 'gateway': [0, 0, 0, 0]}, 'eth0': {'preup': False, 'predown': False, 'ip': [192, 168, 1, 45], 'up': True, 'mac': u'00:1d:ec:17:2f:c6', 'netmask': [255, 255, 255, 0], 'dhcp': False, 'bcast': [192, 168, 1, 45], 'gateway': [192, 168, 1, 1]}}
Getting attribute  netmask  for adapter wg0
nameservers: [[192, 168, 1, 1], [8, 8, 8, 8]]
read configured interface: {}
self.ifaces after loading: {'wg0': {'preup': False, 'predown': False, 'ip': [0, 0, 0, 0], 'up': True, 'netmask': [0, 0, 0, 0], 'dhcp': True, 'gateway': [0, 0, 0, 0]}, 'wlan3': {'preup': '\tpre-up wl-config.sh -m unencrypted -k ********* -s "artcom_6633" \n', 'predown': '\tpost-down wl-down.sh\n', 'ip': [0, 0, 0, 0], 'up': False, 'netmask': [0, 0, 0, 0], 'dhcp': True, 'gateway': [0, 0, 0, 0]}, 'eth0': {'preup': False, 'predown': False, 'ip': [192, 168, 1, 45], 'up': True, 'mac': u'00:1d:ec:17:2f:c6', 'netmask': [255, 255, 255, 0], 'dhcp': False, 'bcast': [192, 168, 1, 45], 'gateway': [192, 168, 1, 1]}}
Getting attribute  gateway  for adapter wg0
nameservers: [[192, 168, 1, 1], [8, 8, 8, 8]]
read configured interface: {}
self.ifaces after loading: {'wg0': {'preup': False, 'predown': False, 'ip': [0, 0, 0, 0], 'up': True, 'netmask': [0, 0, 0, 0], 'dhcp': True, 'gateway': [0, 0, 0, 0]}, 'wlan3': {'preup': '\tpre-up wl-config.sh -m unencrypted -k ********* -s "artcom_6633" \n', 'predown': '\tpost-down wl-down.sh\n', 'ip': [0, 0, 0, 0], 'up': False, 'netmask': [0, 0, 0, 0], 'dhcp': True, 'gateway': [0, 0, 0, 0]}, 'eth0': {'preup': False, 'predown': False, 'ip': [192, 168, 1, 45], 'up': True, 'mac': u'00:1d:ec:17:2f:c6', 'netmask': [255, 255, 255, 0], 'dhcp': False, 'bcast': [192, 168, 1, 45], 'gateway': [192, 168, 1, 1]}}
Getting attribute  mac  for adapter wg0
nameservers: [[192, 168, 1, 1], [8, 8, 8, 8]]
read configured interface: {}
self.ifaces after loading: {'wg0': {'preup': False, 'predown': False, 'ip': [0, 0, 0, 0], 'up': True, 'netmask': [0, 0, 0, 0], 'dhcp': True, 'gateway': [0, 0, 0, 0]}, 'wlan3': {'preup': '\tpre-up wl-config.sh -m unencrypted -k ********* -s "artcom_6633" \n', 'predown': '\tpost-down wl-down.sh\n', 'ip': [0, 0, 0, 0], 'up': False, 'netmask': [0, 0, 0, 0], 'dhcp': True, 'gateway': [0, 0, 0, 0]}, 'eth0': {'preup': False, 'predown': False, 'ip': [192, 168, 1, 45], 'up': True, 'mac': u'00:1d:ec:17:2f:c6', 'netmask': [255, 255, 255, 0], 'dhcp': False, 'bcast': [192, 168, 1, 45], 'gateway': [192, 168, 1, 1]}}
Getting attribute  dhcp  for adapter wg0
nameservers: [[192, 168, 1, 1], [8, 8, 8, 8]]
read configured interface: {}
self.ifaces after loading: {'wg0': {'preup': False, 'predown': False, 'ip': [0, 0, 0, 0], 'up': True, 'netmask': [0, 0, 0, 0], 'dhcp': True, 'gateway': [0, 0, 0, 0]}, 'wlan3': {'preup': '\tpre-up wl-config.sh -m unencrypted -k ********* -s "artcom_6633" \n', 'predown': '\tpost-down wl-down.sh\n', 'ip': [0, 0, 0, 0], 'up': False, 'netmask': [0, 0, 0, 0], 'dhcp': True, 'gateway': [0, 0, 0, 0]}, 'eth0': {'preup': False, 'predown': False, 'ip': [192, 168, 1, 45], 'up': True, 'mac': u'00:1d:ec:17:2f:c6', 'netmask': [255, 255, 255, 0], 'dhcp': False, 'bcast': [192, 168, 1, 45], 'gateway': [192, 168, 1, 1]}}
Getting attribute  ip  for adapter wg0
nameservers: [[192, 168, 1, 1], [8, 8, 8, 8]]
read configured interface: {}
self.ifaces after loading: {'wg0': {'preup': False, 'predown': False, 'ip': [0, 0, 0, 0], 'up': True, 'netmask': [0, 0, 0, 0], 'dhcp': True, 'gateway': [0, 0, 0, 0]}, 'wlan3': {'preup': '\tpre-up wl-config.sh -m unencrypted -k ********* -s "artcom_6633" \n', 'predown': '\tpost-down wl-down.sh\n', 'ip': [0, 0, 0, 0], 'up': False, 'netmask': [0, 0, 0, 0], 'dhcp': True, 'gateway': [0, 0, 0, 0]}, 'eth0': {'preup': False, 'predown': False, 'ip': [192, 168, 1, 45], 'up': True, 'mac': u'00:1d:ec:17:2f:c6', 'netmask': [255, 255, 255, 0], 'dhcp': False, 'bcast': [192, 168, 1, 45], 'gateway': [192, 168, 1, 1]}}
Getting attribute  netmask  for adapter wg0
nameservers: [[192, 168, 1, 1], [8, 8, 8, 8]]
read configured interface: {}
self.ifaces after loading: {'wg0': {'preup': False, 'predown': False, 'ip': [0, 0, 0, 0], 'up': True, 'netmask': [0, 0, 0, 0], 'dhcp': True, 'gateway': [0, 0, 0, 0]}, 'wlan3': {'preup': '\tpre-up wl-config.sh -m unencrypted -k ********* -s "artcom_6633" \n', 'predown': '\tpost-down wl-down.sh\n', 'ip': [0, 0, 0, 0], 'up': False, 'netmask': [0, 0, 0, 0], 'dhcp': True, 'gateway': [0, 0, 0, 0]}, 'eth0': {'preup': False, 'predown': False, 'ip': [192, 168, 1, 45], 'up': True, 'mac': u'00:1d:ec:17:2f:c6', 'netmask': [255, 255, 255, 0], 'dhcp': False, 'bcast': [192, 168, 1, 45], 'gateway': [192, 168, 1, 1]}}
Getting attribute  netmask  for adapter wg0
nameservers: [[192, 168, 1, 1], [8, 8, 8, 8]]
read configured interface: {}
self.ifaces after loading: {'wg0': {'preup': False, 'predown': False, 'ip': [0, 0, 0, 0], 'up': True, 'netmask': [0, 0, 0, 0], 'dhcp': True, 'gateway': [0, 0, 0, 0]}, 'wlan3': {'preup': '\tpre-up wl-config.sh -m unencrypted -k ********* -s "artcom_6633" \n', 'predown': '\tpost-down wl-down.sh\n', 'ip': [0, 0, 0, 0], 'up': False, 'netmask': [0, 0, 0, 0], 'dhcp': True, 'gateway': [0, 0, 0, 0]}, 'eth0': {'preup': False, 'predown': False, 'ip': [192, 168, 1, 45], 'up': True, 'mac': u'00:1d:ec:17:2f:c6', 'netmask': [255, 255, 255, 0], 'dhcp': False, 'bcast': [192, 168, 1, 45], 'gateway': [192, 168, 1, 1]}}
Getting attribute  gateway  for adapter wg0
nameservers: [[192, 168, 1, 1], [8, 8, 8, 8]]
read configured interface: {}
self.ifaces after loading: {'wg0': {'preup': False, 'predown': False, 'ip': [0, 0, 0, 0], 'up': True, 'netmask': [0, 0, 0, 0], 'dhcp': True, 'gateway': [0, 0, 0, 0]}, 'wlan3': {'preup': '\tpre-up wl-config.sh -m unencrypted -k ********* -s "artcom_6633" \n', 'predown': '\tpost-down wl-down.sh\n', 'ip': [0, 0, 0, 0], 'up': False, 'netmask': [0, 0, 0, 0], 'dhcp': True, 'gateway': [0, 0, 0, 0]}, 'eth0': {'preup': False, 'predown': False, 'ip': [192, 168, 1, 45], 'up': True, 'mac': u'00:1d:ec:17:2f:c6', 'netmask': [255, 255, 255, 0], 'dhcp': False, 'bcast': [192, 168, 1, 45], 'gateway': [192, 168, 1, 1]}}
Getting attribute  mac  for adapter wg0
nameservers: [[192, 168, 1, 1], [8, 8, 8, 8]]
read configured interface: {}
self.ifaces after loading: {'wg0': {'preup': False, 'predown': False, 'ip': [0, 0, 0, 0], 'up': True, 'netmask': [0, 0, 0, 0], 'dhcp': True, 'gateway': [0, 0, 0, 0]}, 'wlan3': {'preup': '\tpre-up wl-config.sh -m unencrypted -k ********* -s "artcom_6633" \n', 'predown': '\tpost-down wl-down.sh\n', 'ip': [0, 0, 0, 0], 'up': False, 'netmask': [0, 0, 0, 0], 'dhcp': True, 'gateway': [0, 0, 0, 0]}, 'eth0': {'preup': False, 'predown': False, 'ip': [192, 168, 1, 45], 'up': True, 'mac': u'00:1d:ec:17:2f:c6', 'netmask': [255, 255, 255, 0], 'dhcp': False, 'bcast': [192, 168, 1, 45], 'gateway': [192, 168, 1, 1]}}
Getting attribute  dhcp  for adapter wg0
nameservers: [[192, 168, 1, 1], [8, 8, 8, 8]]
read configured interface: {}
self.ifaces after loading: {'wg0': {'preup': False, 'predown': False, 'ip': [0, 0, 0, 0], 'up': True, 'netmask': [0, 0, 0, 0], 'dhcp': True, 'gateway': [0, 0, 0, 0]}, 'wlan3': {'preup': '\tpre-up wl-config.sh -m unencrypted -k ********* -s "artcom_6633" \n', 'predown': '\tpost-down wl-down.sh\n', 'ip': [0, 0, 0, 0], 'up': False, 'netmask': [0, 0, 0, 0], 'dhcp': True, 'gateway': [0, 0, 0, 0]}, 'eth0': {'preup': False, 'predown': False, 'ip': [192, 168, 1, 45], 'up': True, 'mac': u'00:1d:ec:17:2f:c6', 'netmask': [255, 255, 255, 0], 'dhcp': False, 'bcast': [192, 168, 1, 45], 'gateway': [192, 168, 1, 1]}}
Getting attribute  ip  for adapter wg0
nameservers: [[192, 168, 1, 1], [8, 8, 8, 8]]
read configured interface: {}
self.ifaces after loading: {'wg0': {'preup': False, 'predown': False, 'ip': [0, 0, 0, 0], 'up': True, 'netmask': [0, 0, 0, 0], 'dhcp': True, 'gateway': [0, 0, 0, 0]}, 'wlan3': {'preup': '\tpre-up wl-config.sh -m unencrypted -k ********* -s "artcom_6633" \n', 'predown': '\tpost-down wl-down.sh\n', 'ip': [0, 0, 0, 0], 'up': False, 'netmask': [0, 0, 0, 0], 'dhcp': True, 'gateway': [0, 0, 0, 0]}, 'eth0': {'preup': False, 'predown': False, 'ip': [192, 168, 1, 45], 'up': True, 'mac': u'00:1d:ec:17:2f:c6', 'netmask': [255, 255, 255, 0], 'dhcp': False, 'bcast': [192, 168, 1, 45], 'gateway': [192, 168, 1, 1]}}
Getting attribute  netmask  for adapter wg0
nameservers: [[192, 168, 1, 1], [8, 8, 8, 8]]
read configured interface: {}
self.ifaces after loading: {'wg0': {'preup': False, 'predown': False, 'ip': [0, 0, 0, 0], 'up': True, 'netmask': [0, 0, 0, 0], 'dhcp': True, 'gateway': [0, 0, 0, 0]}, 'wlan3': {'preup': '\tpre-up wl-config.sh -m unencrypted -k ********* -s "artcom_6633" \n', 'predown': '\tpost-down wl-down.sh\n', 'ip': [0, 0, 0, 0], 'up': False, 'netmask': [0, 0, 0, 0], 'dhcp': True, 'gateway': [0, 0, 0, 0]}, 'eth0': {'preup': False, 'predown': False, 'ip': [192, 168, 1, 45], 'up': True, 'mac': u'00:1d:ec:17:2f:c6', 'netmask': [255, 255, 255, 0], 'dhcp': False, 'bcast': [192, 168, 1, 45], 'gateway': [192, 168, 1, 1]}}
Getting attribute  netmask  for adapter wg0
nameservers: [[192, 168, 1, 1], [8, 8, 8, 8]]
read configured interface: {}
self.ifaces after loading: {'wg0': {'preup': False, 'predown': False, 'ip': [0, 0, 0, 0], 'up': True, 'netmask': [0, 0, 0, 0], 'dhcp': True, 'gateway': [0, 0, 0, 0]}, 'wlan3': {'preup': '\tpre-up wl-config.sh -m unencrypted -k ********* -s "artcom_6633" \n', 'predown': '\tpost-down wl-down.sh\n', 'ip': [0, 0, 0, 0], 'up': False, 'netmask': [0, 0, 0, 0], 'dhcp': True, 'gateway': [0, 0, 0, 0]}, 'eth0': {'preup': False, 'predown': False, 'ip': [192, 168, 1, 45], 'up': True, 'mac': u'00:1d:ec:17:2f:c6', 'netmask': [255, 255, 255, 0], 'dhcp': False, 'bcast': [192, 168, 1, 45], 'gateway': [192, 168, 1, 1]}}
Getting attribute  gateway  for adapter wg0

Thank you


Re: OpenPli 8.2 Release online in the downloadsection. #63 WanWizard

  • PLi® Core member
  • 70,453 posts

+1,809
Excellent

Posted 5 June 2022 - 22:00

what box is this?


Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)

Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.

Many answers to your question can be found in our new and improved wiki.

Re: OpenPli 8.2 Release online in the downloadsection. #64 oskardto

  • Member
  • 10 posts

0
Neutral

Posted 5 June 2022 - 22:01

Config files:

root@sad4kse-45:~# cat /etc/init.d/wireguard
#!/bin/sh
#
case "$1" in
start)
        /usr/bin/wg-quick up wg0
        ;;
stop)
        /usr/bin/wg-quick down wg0
        ;;
restart|reload)
        $0 stop
        sleep 2
        $0 start
        ;;
version)
        echo "Wireguard OpenPli"
        ;;
info)
        echo "wireguard-tools"
        ;;
*)
        echo "Usage: $0 start|stop|restart"
        exit 1
        ;;
esac
exit 0

and

root@sad4kse-45:~# cat /etc/wireguard/wg0.conf
#DUO 4K SE SA-45 192.168.1.45
[Interface]
Address = 10.10.10.45/32
PrivateKey = SMa.....kRw/YnlY=

#HP probbok 192.168.0.22 piwnica Linux
[Peer]
PublicKey = HI25r3hH+.....UTLrdywI=
AllowedIPs = 10.10.10.22/32, 10.10.10.0/24
EndPoint = mydomain.dyndns.org:5xxx5
PersistentKeepalive = 25

Re: OpenPli 8.2 Release online in the downloadsection. #65 oskardto

  • Member
  • 10 posts

0
Neutral

Posted 5 June 2022 - 22:02

Vu+ Uno 4K SE and VU+ Duo 4K SE


Re: OpenPli 8.2 Release online in the downloadsection. #66 WanWizard

  • PLi® Core member
  • 70,453 posts

+1,809
Excellent

Posted 5 June 2022 - 22:04

The startup hangs on the fact interface wg0 is reported "up", but isn't up at all, so the IP can't be retrieved.


Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)

Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.

Many answers to your question can be found in our new and improved wiki.

Re: OpenPli 8.2 Release online in the downloadsection. #67 WanWizard

  • PLi® Core member
  • 70,453 posts

+1,809
Excellent

Posted 5 June 2022 - 22:05

This probably means wireguard needs to be started after the network is up but before Enigma is started.

 

What symlink in /etc/rc3.d is created for wireguard?


Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)

Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.

Many answers to your question can be found in our new and improved wiki.

Re: OpenPli 8.2 Release online in the downloadsection. #68 oskardto

  • Member
  • 10 posts

0
Neutral

Posted 5 June 2022 - 22:10

root@sad4kse-45:~# update-rc.d wireguard defaults
 Adding system startup for /etc/init.d/wireguard.
 
root@sad4kse-45:~# ls /etc/rc3.d/ | grep wire
S20wireguard
 
root@sad4kse-45:~# cat /etc/rc3.d/S20wireguard
#!/bin/sh
#
case "$1" in
start)
        /usr/bin/wg-quick up wg0
        ;;
stop)
        /usr/bin/wg-quick down wg0
        ;;
restart|reload)
        $0 stop
        sleep 2
        $0 start
        ;;
version)
        echo "Wireguard OpenPli"
        ;;
info)
        echo "wireguard-tools 1.0.20210424-r0.5"
        ;;
*)
        echo "Usage: $0 start|stop|restart"
        exit 1
        ;;
esac
exit 0
 
If I make symlink S85wireguard -> the same problem
 
Can I fix it somehow?
PS.
This is my last post for now, because I don't have permission to write any more)

Re: OpenPli 8.2 Release online in the downloadsection. #69 WanWizard

  • PLi® Core member
  • 70,453 posts

+1,809
Excellent

Posted 5 June 2022 - 22:17

I have no experience with wireguard. Doesn't it have a log somewhere, that could explain why it doesn't start?


Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)

Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.

Many answers to your question can be found in our new and improved wiki.

Re: OpenPli 8.2 Release online in the downloadsection. #70 oskardto

  • Member
  • 10 posts

0
Neutral

Posted 5 June 2022 - 22:32

It is not like that.
Wireguard starts correctly. Access to the console via SSH is valid.
The enigma does not start. There is a small circle on the screen all the time.
For now I have found a pseudo cron solution.
n crontabUstawiłem i:
*/5 * * * * /usr/keys/script/wgtest.sh &
and:
root@sad4kse-45:~# cat /usr/keys/script/wgtest.sh
#! /bin/sh
if ping -c 3 10.10.10.22
then
echo "jest ping `date`" >> /tmp/wgtest.txt
else
echo "--brak ping `date` " >> /tmp/wgtest.txt
echo "restart wireguard " >> /tmp/wgtest.txt
/etc/init.d/wireguard restart
fi
if ifconfig | grep wg0
then
echo "jest wg0 `date`" >> /tmp/wgtest.txt
else
echo "--brak wg0 `date` " >> /tmp/wgtest.txt
echo "restart wireguard " >> /tmp/wgtest.txt
/etc/init.d/wireguard restart
fi
exit
 
It works, but if I make from menu "restart enigma" then circle on tv screen :-(

Re: OpenPli 8.2 Release online in the downloadsection. #71 WanWizard

  • PLi® Core member
  • 70,453 posts

+1,809
Excellent

Posted 5 June 2022 - 22:35

Enigma doesn't start through because wg0 is up but doesn't have an IP address. It loops on polling the interface for the status.


Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)

Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.

Many answers to your question can be found in our new and improved wiki.

Re: OpenPli 8.2 Release online in the downloadsection. #72 oskardto

  • Member
  • 10 posts

0
Neutral

Posted 5 June 2022 - 22:41

I would also like to mention that there was no such problem on version 8.1.

dmesg says nothing.

   51.999637] Bluetooth: Core ver 2.20
[   52.003293] NET: Registered protocol family 31
[   52.007769] Bluetooth: HCI device and connection manager initialized
[   52.008139] usb 5-1.1: new high-speed USB device number 5 using ehci-brcm
[   52.020959] Bluetooth: HCI socket layer initialized
[   52.025858] Bluetooth: L2CAP socket layer initialized
[   52.030948] Bluetooth: SCO socket layer initialized
[   52.102478]
[   52.102478] Dongle Host Driver, version 1.363.110.16 (r620666)
[   52.102478] Compiled from
[   52.112949] Register interface [wlan3]  MAC: 00:90:4c:11:22:33
[   52.112949]
[   52.544189] dsa f0b00000.ethernet_switch eth0: Link is Down
[   54.580225] dsa f0b00000.ethernet_switch eth0: Link is Up - 1Gbps/Full - flow control off
[   54.588452] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   57.004657] wireguard: WireGuard 1.0.20210424 loaded. See www.wireguard.com for information.
[   57.013130] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
[   57.490271] [VID]: VIDEO_SET_STREAMTYPE 1
[   57.494467] [VID]: VIDEO_SELECT_SOURCE 1  0
[   57.498776] [VID]: VIDEO_PLAY 1  5 0
[   57.507594] [VID]: VIDEO_CONTINUE 1  1
[   57.511460] [VID]: VIDEO_CLEAR_BUFFER 1  1 0
[   57.672797] [VID]: VIDEO_STOP 0  1
[   57.677124] [VID]: VIDEO_SELECT_SOURCE 0  0
[   79.960893] [AUD]: AUDIO_SET_MUTE 0
[   79.964791] [AUD]: AUDIO_SET_MIXER -758497648
[   79.969266] [AUD]: AUDIO_SET_MIXER : amixl 0, amixr 0
[   79.974335] [AUD]: AUDIO_SET_MIXER : next left volume 0, right volume 0
[   79.980981] [AUD]: AUDIO_SET_MIXER : next left volume -70, right volume -70

From the console side, everything seems to be working fine. And on the screen a small circle :-(


Re: OpenPli 8.2 Release online in the downloadsection. #73 WanWizard

  • PLi® Core member
  • 70,453 posts

+1,809
Excellent

Posted 5 June 2022 - 23:15

8.1 didn't check interface information, it just used whatever rubbish was available the moment Enigma checked during startup.

 

Can you post the output of

ifconfig wg0
ip addr show dev wg0

and

grep -r "" /sys/class/net/wg0/

 


Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)

Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.

Many answers to your question can be found in our new and improved wiki.

Re: OpenPli 8.2 Release online in the downloadsection. #74 WanWizard

  • PLi® Core member
  • 70,453 posts

+1,809
Excellent

Posted 6 June 2022 - 00:21

Can you test something for me?

 

Install the enigma2 sources:

opkg install enigma2-src

then edit "/usr/lib/enigma2/python/Components/Network.py", and replace

			if os.path.exists('/sys/class/net/%s/carrier' % iface):
				data['up'] = open('/sys/class/net/%s/carrier' % iface).read().strip() == '1'

by

			if os.path.exists('/sys/class/net/%s/operstate' % iface):
				data['up'] = open('/sys/class/net/%s/operstate' % iface).read().strip() == 'up'

( make sure you keep the correct indentation )

 

and see if Enigma now starts properly?


Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)

Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.

Many answers to your question can be found in our new and improved wiki.

Re: OpenPli 8.2 Release online in the downloadsection. #75 oskardto

  • Member
  • 10 posts

0
Neutral

Posted 6 June 2022 - 09:43

Hi WanWizard:

root@sad4kse-45:~# ifconfig wg0
wg0       Link encap:UNSPEC  HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00
          inet addr:10.10.10.45  P-t-P:10.10.10.45  Mask:255.255.255.255
          UP POINTOPOINT RUNNING NOARP  MTU:1420  Metric:1
          RX packets:4568 errors:0 dropped:0 overruns:0 frame:0
          TX packets:8978 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:625040 (610.3 KiB)  TX bytes:3638740 (3.4 MiB)

root@sad4kse-45:~# ip addr show wg0
6: wg0: <POINTOPOINT,NOARP,UP,LOWER_UP> mtu 1420 qdisc noqueue
    link/[65534]
    inet 10.10.10.45/32 scope global wg0
       valid_lft forever preferred_lft forever

root@sad4kse-45:~# grep -r "" /sys/class/net/wg0
/sys/class/net/wg0/mtu:1420
/sys/class/net/wg0/type:65534
/sys/class/net/wg0/netdev_group:0
/sys/class/net/wg0/flags:0x91
/sys/class/net/wg0/power/control:auto
/sys/class/net/wg0/power/runtime_active_time:0
/sys/class/net/wg0/power/runtime_status:unsupported
/sys/class/net/wg0/power/runtime_suspended_time:0
/sys/class/net/wg0/dormant:0
/sys/class/net/wg0/name_assign_type:3
/sys/class/net/wg0/addr_assign_type:0
/sys/class/net/wg0/dev_id:0x0
/sys/class/net/wg0/gro_flush_timeout:0
/sys/class/net/wg0/iflink:6
/sys/class/net/wg0/addr_len:0
/sys/class/net/wg0/address:
/sys/class/net/wg0/operstate:unknown
/sys/class/net/wg0/carrier_changes:0
/sys/class/net/wg0/broadcast:
/sys/class/net/wg0/queues/rx-0/rps_flow_cnt:0
/sys/class/net/wg0/queues/rx-0/rps_cpus:0
/sys/class/net/wg0/queues/tx-0/xps_cpus:0
/sys/class/net/wg0/queues/tx-0/tx_maxrate:0
/sys/class/net/wg0/queues/tx-0/tx_timeout:0
/sys/class/net/wg0/queues/tx-0/byte_queue_limits/limit:0
/sys/class/net/wg0/queues/tx-0/byte_queue_limits/limit_max:1879048192
/sys/class/net/wg0/queues/tx-0/byte_queue_limits/limit_min:0
/sys/class/net/wg0/queues/tx-0/byte_queue_limits/hold_time:1000
/sys/class/net/wg0/queues/tx-0/byte_queue_limits/inflight:0
/sys/class/net/wg0/tx_queue_len:0
/sys/class/net/wg0/uevent:DEVTYPE=wireguard
/sys/class/net/wg0/uevent:INTERFACE=wg0
/sys/class/net/wg0/uevent:IFINDEX=6
/sys/class/net/wg0/statistics/rx_fifo_errors:0
/sys/class/net/wg0/statistics/collisions:0
/sys/class/net/wg0/statistics/rx_errors:0
/sys/class/net/wg0/statistics/rx_compressed:0
/sys/class/net/wg0/statistics/rx_dropped:0
/sys/class/net/wg0/statistics/tx_packets:9136
/sys/class/net/wg0/statistics/tx_errors:0
/sys/class/net/wg0/statistics/rx_missed_errors:0
/sys/class/net/wg0/statistics/rx_over_errors:0
/sys/class/net/wg0/statistics/tx_carrier_errors:0
/sys/class/net/wg0/statistics/tx_heartbeat_errors:0
/sys/class/net/wg0/statistics/rx_crc_errors:0
/sys/class/net/wg0/statistics/multicast:0
/sys/class/net/wg0/statistics/tx_fifo_errors:0
/sys/class/net/wg0/statistics/tx_aborted_errors:0
/sys/class/net/wg0/statistics/rx_bytes:676748
/sys/class/net/wg0/statistics/tx_compressed:0
/sys/class/net/wg0/statistics/tx_dropped:0
/sys/class/net/wg0/statistics/rx_packets:4818
/sys/class/net/wg0/statistics/tx_bytes:3686256
/sys/class/net/wg0/statistics/tx_window_errors:0
/sys/class/net/wg0/statistics/rx_frame_errors:0
/sys/class/net/wg0/statistics/rx_length_errors:0
/sys/class/net/wg0/dev_port:0
/sys/class/net/wg0/ifindex:6
/sys/class/net/wg0/link_mode:0
/sys/class/net/wg0/carrier:1

I will answer the next post in a moment


Re: OpenPli 8.2 Release online in the downloadsection. #76 oskardto

  • Member
  • 10 posts

0
Neutral

Posted 6 June 2022 - 10:28

@WanWizard you are great :-)

After replace:

root@sad4kse-45:/tmp# diff Network.py.org Network.py.new
--- Network.py.org
+++ Network.py.new
@@ -65,8 +65,8 @@
        def getAddrInet(self, iface, callback):
                data = {'up': False, 'dhcp': False, 'preup': False, 'predown': False}
                try:
-                       if os.path.exists('/sys/class/net/%s/carrier' % iface):
-                               data['up'] = open('/sys/class/net/%s/carrier' % iface).read().strip() == '1'
+                       if os.path.exists('/sys/class/net/%s/operstate' % iface):
+                               data['up'] = open('/sys/class/net/%s/operstate' % iface).read().strip() == 'up'
                        if data['up']:
                                self.configuredInterfaces.append(iface)
                        nit = ni.ifaddresses(iface)

Work fine, super :-)

 

Thank you very much for your help.


Re: OpenPli 8.2 Release online in the downloadsection. #77 WanWizard

  • PLi® Core member
  • 70,453 posts

+1,809
Excellent

Posted 6 June 2022 - 12:18

Thanks for testing, I'll commit this, and backport it to 8.2-release.


Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)

Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.

Many answers to your question can be found in our new and improved wiki.

Re: OpenPli 8.2 Release online in the downloadsection. #78 oskardto

  • Member
  • 10 posts

0
Neutral

Posted 6 June 2022 - 12:25

In terms of testing, I recommend myself for the future.
PS.
Is it possible to implement wireguard in VU + Solo2 ?
 
R.

Re: OpenPli 8.2 Release online in the downloadsection. #79 WanWizard

  • PLi® Core member
  • 70,453 posts

+1,809
Excellent

Posted 6 June 2022 - 13:17

I doubt it, it has a very old kernel.


Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)

Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.

Many answers to your question can be found in our new and improved wiki.

Re: OpenPli 8.2 Release online in the downloadsection. #80 zebulon7

  • Senior Member
  • 415 posts

+3
Neutral

Posted 11 June 2022 - 22:20

Hi.

 

I have just noticed i can't access anymore to my vu+ by his ip adress in a browser.

It's since i have update the vu+ to the 8.2

I have change nothing in my installation.

 

What i can do ?


Vu+ Duo 4K SE / OpenATV 7.4 / Double Tuner TNT

Vu+ Duo2 / OpenPLi 9.0 / Double Tuner TNT

 

Back to [EN] Enduser support

10 user(s) are reading this topic

0 members, 10 guests, 0 anonymous users

  1. Forums
  2. → PLi® Support
  3. → [EN] Enduser support