Jump to content


Photo

Vu+ turbo usb tuner dvb-c/t2 setup

Started by HWTest, 29 Sep 2022 18:03

  • Please log in to reply
129 replies to this topic

Re: Vu+ turbo usb tuner dvb-c/t2 setup #21 WanWizard

  • PLi® Core member
  • 70,220 posts

+1,798
Excellent

Posted 18 October 2022 - 11:06

Still to old... ;)

 

See https://cateee.net/l...USB_DVBSKY.html ( requires 3.18+, the Zero 4K has a 4.1 kernel )


Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)

Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.

Many answers to your question can be found in our new and improved wiki.

Re: Vu+ turbo usb tuner dvb-c/t2 setup #22 HWTest

  • Senior Member
  • 152 posts

+3
Neutral

Posted 18 October 2022 - 18:27

I did some flashing and testing:

 

7.3

root@vuzero4k:~# opkg update
Downloading http://downloads.openpli.org/feeds/openpli-7-release/3rd-party-armv7ahf-neon/Packages.gz.
Updated source 'openpli-3rd-party-armv7ahf-neon'.
Downloading http://downloads.openpli.org/feeds/openpli-7-release/3rd-party/Packages.gz.
Updated source 'openpli-3rd-party'.
Downloading http://downloads.openpli.org/feeds/openpli-7-release/3rd-party-vuzero4k/Packages.gz.
Updated source 'openpli-3rd-party-vuzero4k'.
Downloading http://downloads.openpli.org/feeds/openpli-7-release/all/Packages.gz.
Updated source 'openpli-all'.
Downloading http://downloads.openpli.org/feeds/openpli-7-release/armv7ahf-neon/Packages.gz.
Updated source 'openpli-armv7ahf-neon'.
Downloading http://downloads.openpli.org/feeds/openpli-7-release/picons/Packages.gz.
Updated source 'openpli-picons'.
Downloading http://downloads.openpli.org/feeds/openpli-7-release/vuzero4k/Packages.gz.
Updated source 'openpli-vuzero4k'.
root@vuzero4k:~# opkg list *dvbsky*
enigma2-plugin-drivers-ct2-usb-dvbsky-t330 - 1.0-r0.1
kernel-module-dvb-usb-dvbsky-4.1.20-1.9 - 4.1.20-r0.1.2.1 - dvb-usb-dvbsky kernel module
 dvb-usb-dvbsky kernel module; Driver for DVBSky USB

 

8.0

root@vuzero4k:~# opkg update
Downloading http://downloads.openpli.org/feeds/openpli-8-release/3rd-party-armv7ahf-neon/Packages.gz.
Updated source 'openpli-3rd-party-armv7ahf-neon'.
Downloading http://downloads.openpli.org/feeds/openpli-8-release/3rd-party/Packages.gz.
Updated source 'openpli-3rd-party'.
Downloading http://downloads.openpli.org/feeds/openpli-8-release/3rd-party-vuzero4k/Packages.gz.
Updated source 'openpli-3rd-party-vuzero4k'.
Downloading http://downloads.openpli.org/feeds/openpli-8-release/all/Packages.gz.
Updated source 'openpli-all'.
Downloading http://downloads.openpli.org/feeds/openpli-8-release/armv7ahf-neon/Packages.gz.
Updated source 'openpli-armv7ahf-neon'.
Downloading http://downloads.openpli.org/feeds/openpli-8-release/picons/Packages.gz.
Updated source 'openpli-picons'.
Downloading http://downloads.openpli.org/feeds/openpli-8-release/vuzero4k/Packages.gz.
Updated source 'openpli-vuzero4k'.
root@vuzero4k:~# opkg list *dvbsky*
enigma2-plugin-drivers-ct2-usb-dvbsky-t330 - 1.0-r0.8 - enigma2-plugin-drivers-ct2-usb-dvbsky-t330 version 1.0-r0
enigma2-plugin-drivers-ct2-usb-dvbsky-t330 - 1.0-r0.0
enigma2-plugin-drivers-s2-usb-dvbsky-s960 - 1.0-r0.8 - enigma2-plugin-drivers-s2-usb-dvbsky-s960 version 1.0-r0
kernel-module-dvb-usb-dvbsky-4.1.20-1.9 - 4.1.20-r0.1.3.11 - dvb-usb-dvbsky kernel module
kernel-module-dvb-usb-dvbsky-4.1.20-1.9 - 4.1.20-r0.1.3.1

 

8.3

root@vuzero4k:~# opkg update
Downloading http://downloads.openpli.org/feeds/openpli-8-release/3rd-party-armv7ahf-neon/Packages.gz.
Updated source 'openpli-3rd-party-armv7ahf-neon'.
Downloading http://downloads.openpli.org/feeds/openpli-8-release/3rd-party/Packages.gz.
Updated source 'openpli-3rd-party'.
Downloading http://downloads.openpli.org/feeds/openpli-8-release/3rd-party-vuzero4k/Packages.gz.
Updated source 'openpli-3rd-party-vuzero4k'.
Downloading http://downloads.openpli.org/feeds/openpli-8-release/all/Packages.gz.
Updated source 'openpli-all'.
Downloading http://downloads.openpli.org/feeds/openpli-8-release/armv7ahf-neon/Packages.gz.
Updated source 'openpli-armv7ahf-neon'.
Downloading http://downloads.openpli.org/feeds/openpli-8-release/picons/Packages.gz.
Updated source 'openpli-picons'.
Downloading http://downloads.openpli.org/feeds/openpli-8-release/vuzero4k/Packages.gz.
Updated source 'openpli-vuzero4k'.
root@vuzero4k:~# opkg list *dvbsky*
enigma2-plugin-drivers-ct2-usb-dvbsky-t330 - 1.0-r0.8 - enigma2-plugin-drivers-ct2-usb-dvbsky-t330 version 1.0-r0
enigma2-plugin-drivers-s2-usb-dvbsky-s960 - 1.0-r0.8 - enigma2-plugin-drivers-s2-usb-dvbsky-s960 version 1.0-r0
kernel-module-dvb-usb-dvbsky-4.1.20-1.9 - 4.1.20-r0.1.3.11 - dvb-usb-dvbsky kernel module

 

I have noticed the DVBSky (and many more) drivers reappeared in the feed.

But It still doesn't work.

I'm attaching debug logs from 7.3, 8.0 and 8.3 - in the first two the tuners are working, in the last one not working.

The main difference IMHO is - the first two - I have upgraded to them.

The 8.3 was flashed with a config restore.

Maybe I could try to upgrade from 7.3 to 8.3?

 

Attached Files


Re: Vu+ turbo usb tuner dvb-c/t2 setup #23 WanWizard

  • PLi® Core member
  • 70,220 posts

+1,798
Excellent

Posted 18 October 2022 - 19:11

The driver is exactly the same in all instances, which is logical, the kernel hasn't changed at all.

 

The major (and probably only relevant) difference between 7.x and 8.x is mdev vs udev, so it could be a udev detection issue.


Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)

Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.

Many answers to your question can be found in our new and improved wiki.

Re: Vu+ turbo usb tuner dvb-c/t2 setup #24 HWTest

  • Senior Member
  • 152 posts

+3
Neutral

Posted 18 October 2022 - 20:12

If the change was between 7.x and 8.x, then in 8.0 it shouldn't work but it does work.

That doesn't make sense ...

 

8.0

[eDVBFrontend1] opening frontend
[eDVBFrontend1] setVoltage FE_ENABLE_HIGH_LNB_VOLTAGE 0 FE_SET_VOLTAGE 2
[eDVBFrontend1] tune
[eDVBFrontend1] tune setting type to 2 from 0
[eDVBChannel] OURSTATE: tuning
[eDVBServicePMTHandler] allocate Channel: res 0
[eDVBCIInterfaces] addPMTHandler 1:0:1F:10C:2111:20CB:EEEE0000:0:0:0:
[eDVBChannel] getDemux cap=00
[eDVBResourceManager] allocate demux cap=00
[eDVBResourceManager] allocating demux adapter=0, demux=0, source=-1 fesource=1
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBFrontend1] startTuneTimeout 5000
[eDVBFrontend1] setVoltage 0
[eDVBFrontend1] setVoltage FE_ENABLE_HIGH_LNB_VOLTAGE 0 FE_SET_VOLTAGE 2
[eDVBFrontend1] setFrontend 1
[eDVBFrontend1] setting frontend
[eDVBFrontend1] fe event: status 0, inversion off, m_tuning 1
[eDVBFrontend1] fe event: status 1f, inversion off, m_tuning 2
[eDVBChannel] OURSTATE: ok

 

 

8.3

[eDVBFrontend1] opening frontend
[eDVBFrontend1] setVoltage FE_ENABLE_HIGH_LNB_VOLTAGE 0 FE_SET_VOLTAGE 2
[eDVBFrontend1] tune
[eDVBFrontend1] tune setting type to 2 from 0
[eDVBChannel] OURSTATE: tuning
[eDVBServicePMTHandler] allocate Channel: res 0
[eDVBCIInterfaces] addPMTHandler 1:0:1F:10C:2111:20CB:EEEE0000:0:0:0:
[eDVBChannel] getDemux cap=00
[eDVBResourceManager] allocate demux cap=00
[eDVBResourceManager] allocating demux adapter=0, demux=0, source=-1 fesource=1
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBFrontend1] startTuneTimeout 5000
[eDVBFrontend1] setFrontend 1
[eDVBFrontend1] setting frontend
[eDVBFrontend1] fe event: status 0, inversion off, m_tuning 1
[eDVBChannel] OURSTATE: failed, retune
[eDVBFrontend1] tune
[eDVBChannel] OURSTATE: tuning
[eDVBServicePMTHandler] tune failed.
[eDVBServicePlay] DVB service failed to tune - error 1

And the green LED on the USB stick doesn't light up

 


Re: Vu+ turbo usb tuner dvb-c/t2 setup #25 WanWizard

  • PLi® Core member
  • 70,220 posts

+1,798
Excellent

Posted 18 October 2022 - 21:04

I wonder if this is not Enigma related, as every 8.x release runs the same OE.

 

Your log shows the stick responds fine, but the tuning failed. Which is very different to "the stick doesn't work".


Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)

Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.

Many answers to your question can be found in our new and improved wiki.

Re: Vu+ turbo usb tuner dvb-c/t2 setup #26 HWTest

  • Senior Member
  • 152 posts

+3
Neutral

Posted 18 October 2022 - 21:18

Sorry I'm just an user, for me when the green LED on the stick stays off, then it doesn't work.


Re: Vu+ turbo usb tuner dvb-c/t2 setup #27 HWTest

  • Senior Member
  • 152 posts

+3
Neutral

Posted 19 October 2022 - 07:19

I did some more flashing and testing, this time focusing on the green LED on the stick.

And you are probably right.

During a scan, the LED is on, only when the tuning is locked on a channel with a signal - on 8.0.

On 8.3 the LED is off all the time and a scan finds nothing.

I was also comparing the content of 8.0 and 8.3 dmesg and messages and all seems fine there.

So it seems, that the stick is working, it "just" doesn't tune ...


Re: Vu+ turbo usb tuner dvb-c/t2 setup #28 WanWizard

  • PLi® Core member
  • 70,220 posts

+1,798
Excellent

Posted 19 October 2022 - 10:30

Perhaps one of the developers can look into it, not my level of expertise I'm afraid.


Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)

Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.

Many answers to your question can be found in our new and improved wiki.

Re: Vu+ turbo usb tuner dvb-c/t2 setup #29 HWTest

  • Senior Member
  • 152 posts

+3
Neutral

Posted 24 October 2022 - 12:41

Any developer?


Re: Vu+ turbo usb tuner dvb-c/t2 setup #30 HWTest

  • Senior Member
  • 152 posts

+3
Neutral

Posted 19 November 2022 - 12:26

Nobody cares, that there is something broken?

Strange ...


Re: Vu+ turbo usb tuner dvb-c/t2 setup #31 WanWizard

  • PLi® Core member
  • 70,220 posts

+1,798
Excellent

Posted 19 November 2022 - 13:03

More likely nobody has the hardware required to test.

 

We're not a big fan of USB tuners, due to the low-budget implementation of most of them, and the fact they require kernel drivers we don't maintain nor control.


Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)

Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.

Many answers to your question can be found in our new and improved wiki.

Re: Vu+ turbo usb tuner dvb-c/t2 setup #32 HWTest

  • Senior Member
  • 152 posts

+3
Neutral

Posted 19 November 2022 - 13:59

It doesn't seem (to me) to be a driver problem.

I will gladly test it.


Re: Vu+ turbo usb tuner dvb-c/t2 setup #33 WanWizard

  • PLi® Core member
  • 70,220 posts

+1,798
Excellent

Posted 19 November 2022 - 17:42

Someone needs to figure out why on 8.3

[eDVBFrontend1] setVoltage 0
[eDVBFrontend1] setVoltage FE_ENABLE_HIGH_LNB_VOLTAGE 0 FE_SET_VOLTAGE 2

is missing...


Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)

Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.

Many answers to your question can be found in our new and improved wiki.

Re: Vu+ turbo usb tuner dvb-c/t2 setup #34 HWTest

  • Senior Member
  • 152 posts

+3
Neutral

Posted 19 November 2022 - 17:51

Ok.

How can I help with that?


Re: Vu+ turbo usb tuner dvb-c/t2 setup #35 WanWizard

  • PLi® Core member
  • 70,220 posts

+1,798
Excellent

Posted 19 November 2022 - 17:56

No clue, I'm not an E2 developer. Maybe ping @Dimitrij or @ims ?


Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)

Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.

Many answers to your question can be found in our new and improved wiki.

Re: Vu+ turbo usb tuner dvb-c/t2 setup #36 Dimitrij

  • PLi® Core member
  • 10,263 posts

+347
Excellent

Posted 19 November 2022 - 19:01

Someone needs to figure out why on 8.3

[eDVBFrontend1] setVoltage 0
[eDVBFrontend1] setVoltage FE_ENABLE_HIGH_LNB_VOLTAGE 0 FE_SET_VOLTAGE 2

is missing...

What exactly is missing?


GigaBlue UHD Quad 4K /Lunix3-4K/Duo 4K

Re: Vu+ turbo usb tuner dvb-c/t2 setup #37 HWTest

  • Senior Member
  • 152 posts

+3
Neutral

Posted 19 November 2022 - 22:04

Those two lines are present in the log of 8.0 but missing in the log of 8.3

https://forums.openp...dpost&p=1490952

and then tuning fails.


Re: Vu+ turbo usb tuner dvb-c/t2 setup #38 Dimitrij

  • PLi® Core member
  • 10,263 posts

+347
Excellent

Posted 20 November 2022 - 06:44

1)I don't think anyone can help you.

Huge difference between 8.0 & 8.3.

 

2)8.2 work?

 

3)test develop image

 

 

maybe...

https://github.com/O...4ace4dbbf87bd30

this not 8.3


Edited by Dimitrij, 20 November 2022 - 07:03.

GigaBlue UHD Quad 4K /Lunix3-4K/Duo 4K

Re: Vu+ turbo usb tuner dvb-c/t2 setup #39 HWTest

  • Senior Member
  • 152 posts

+3
Neutral

Posted 20 November 2022 - 10:01

1) that's really unfortunate :-(

 

2) 8.1, 8.2, 8.3 don't work

 

3) I did, when I started this thread - it didn't work

But I can try to test it again with the actual develop version

 

https://github.com/O...4ace4dbbf87bd30 - I don't understand that. Does it mean USB tuner support was remove at completely (eDVBUsbAdapter)?


Re: Vu+ turbo usb tuner dvb-c/t2 setup #40 HWTest

  • Senior Member
  • 152 posts

+3
Neutral

Posted 20 November 2022 - 10:27

Addendum to 2) It stopped working in 8.1 and I did report the problem: https://forums.openp...-6#entry1382120

Here are the logs attached: https://forums.openp...-7#entry1382368


Edited by HWTest, 20 November 2022 - 10:29.

Back to [EN] Enduser support

15 user(s) are reading this topic

0 members, 15 guests, 0 anonymous users

  1. Forums
  2. → PLi® Support
  3. → [EN] Enduser support