Witam
Chcę zwrócić uwagę ,że nie działa moduł CI+ECP CANAL+
Czy jest szansa na uzdrowienie ?
Tak zainstalowałem " enigma2 - plugin - Extensions - ci_plus_helper - openpli8 . x_3_all . ipk" moduł jest widoczny, ale nie można go dodać, caid i nie odtwarza programów
Czy utworzyłeś folder /etc/ciplus?
Wyjmij moduł, a następnie włóż go z powrotem. Jeśli wszystko pójdzie dobrze, w telewizorze pojawi się baner informacyjny, na którym będziesz mógł śledzić proces.Tak folder jest , ale nadal nie odtwarza i jest komunikat że moduł jest niezgodny .Nadmienię ,że dekoder to VU ULTIMO 4K
OpenPLi 9.0 release available
Started by WanWizard, 23 Oct 2023 21:04
577 replies to this topic
Re: OpenPLi 9.0 release available #41
-
- Member
- 8 posts
0
Neutral
Posted 25 October 2023 - 19:23
Re: OpenPLi 9.0 release available #42
-
- Senior Member
- 105 posts
+1
Neutral
Posted 25 October 2023 - 19:52
I see lcd4linux is correctly reinstalled during the restore, and the config is also restored without issue. That can be checked by starting lcd4linux in the plugin menu. OWIF access also works fine.
But nothing on the display.
If you have 8.3 and a working LCD at the moment, could you login and tell me the output of
ls -l /dev/lc*?
Ok! I will do that tomorrow!
Re: OpenPLi 9.0 release available #43
-
- PLi® Core member
- 70,424 posts
+1,808
Excellent
Posted 25 October 2023 - 20:00
Ok. I'll leave the Duo2 out of the box for now then 
.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Re: OpenPLi 9.0 release available #44
-
- Senior Member
- 105 posts
+1
Neutral
Posted 26 October 2023 - 07:27
Ok. I'll leave the Duo2 out of the box for now then
9.0
crw------- 1 root root 244, 0 Jan 1 1970 /dev/lcd2
8.3
crw------- 1 root root 244, 0 Jan 1 1970 /dev/lcd2
Re: OpenPLi 9.0 release available #45
-
- PLi® Core member
- 70,424 posts
+1,808
Excellent
Posted 26 October 2023 - 15:51
Ok. So that is not the problem. Maybe something broke inside lcd4linux, I'm afraid I can't help with that.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Re: OpenPLi 9.0 release available #46
-
- Senior Member
- 105 posts
+1
Neutral
Posted 26 October 2023 - 16:32
Ok. So that is not the problem. Maybe something broke inside lcd4linux, I'm afraid I can't help with that.
Ok thanks so far!
Re: OpenPLi 9.0 release available #47
-
- Senior Member
- 380 posts
0
Neutral
Posted 26 October 2023 - 19:26
FYI: On VU+ Duo2 boxes, LCD4Linux needs png-util for the internal display.
Re: OpenPLi 9.0 release available #48
-
- PLi® Core member
- 70,424 posts
+1,808
Excellent
Posted 26 October 2023 - 19:47
Is that new, or was that already the case in 8.3-release? Because it did work there.
I'm just flashing a develop image on my box, will test that in a minute.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Re: OpenPLi 9.0 release available #49
-
- PLi® Core member
- 70,424 posts
+1,808
Excellent
Posted 26 October 2023 - 19:55
There is no such thing as png-util in the feed?
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Re: OpenPLi 9.0 release available #50
-
- Senior Member
- 380 posts
0
Neutral
Posted 26 October 2023 - 19:59
I don't know if there even exists a Python3 compatible png-util.
Re: OpenPLi 9.0 release available #51
-
- PLi® Core member
- 70,424 posts
+1,808
Excellent
Posted 26 October 2023 - 20:18
The build recipe was added, but since it isn't added as a DEPENDS anywhere, it isn't build. Looking into it now.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Re: OpenPLi 9.0 release available #52
-
- Senior Member
- 380 posts
0
Neutral
Posted 26 October 2023 - 20:34
png-util is required for VU+ Duo2 boxes only. It was installed manually back in PLi 8.3 where needed. I suggest not to add to DEPENDS.
Re: OpenPLi 9.0 release available #53
-
- PLi® Core member
- 70,424 posts
+1,808
Excellent
Posted 26 October 2023 - 20:36
Ok. Currently it isn't build at all, also not for VU Duo2, so you can't install it.
I'll try to find a way to add it to the build for the Duo2 only.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Re: OpenPLi 9.0 release available #54
-
- Senior Member
- 64 posts
0
Neutral
Posted 26 October 2023 - 21:16
tested on my vusolo2.. just smooth and nice image.. no problem with all plugins and deps.
gstplayer works fine.. iptv channels too
thank you for this strong work
Edited by tigrousad, 26 October 2023 - 21:17.
Re: OpenPLi 9.0 release available #55
-
- PLi® Core member
- 70,424 posts
+1,808
Excellent
Posted 26 October 2023 - 22:54
I have two problems after flash to 9.0 on my VuDuo2!
First, the Clock on LCD.window does not show up (black screen)
Second, LCD4Linux setting in Webif does not work for me
"Error 404: Not found The requested page doesn't exist", it says in my web browsers (Safari and Brave)
I have reflashed twice and the same result both times
The LCD4Linux plugin works as what I can see!
lcd4linux should work now, affter a software update and a reboot.
I can't confirm any web interface issues, the lcd4linux page works fine here, on the Duo2.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Re: OpenPLi 9.0 release available #56
-
- Senior Member
- 105 posts
+1
Neutral
Posted 27 October 2023 - 07:39
I have two problems after flash to 9.0 on my VuDuo2!
First, the Clock on LCD.window does not show up (black screen)
Second, LCD4Linux setting in Webif does not work for me
"Error 404: Not found The requested page doesn't exist", it says in my web browsers (Safari and Brave)
I have reflashed twice and the same result both times
The LCD4Linux plugin works as what I can see!
lcd4linux should work now, affter a software update and a reboot.
I can't confirm any web interface issues, the lcd4linux page works fine here, on the Duo2.
Ok, I will test later!
Re: OpenPLi 9.0 release available #57
-
- Senior Member
- 30 posts
0
Neutral
Posted 27 October 2023 - 07:42
seems like wireguard disappeared from the feed.
on 9.0-rc had it running without any problems and since flashing to '9.0-final' its not available anymore.
running vu+ uno4kse.
Edited by AllMassive, 27 October 2023 - 07:44.
Re: OpenPLi 9.0 release available #58
-
- Senior Member
- 105 posts
+1
Neutral
Posted 27 October 2023 - 07:44
One more problem after flashed with 9.0
I have flashed my Ultimo4K with OpenPLi 9.0 and after that Jedi Maker doesn´t work for me
I recieved the answer "Server not responding" when trying to update playlist.
It also says that I have wrong URL or not authorized to use the playlist!
When backing to OpenPLi 8.3 and with the same playlists.txt (and other settings) everything works as normal!
Anyone know what went wrong?
I am using the latest update of Jedi Maker
regards
Re: OpenPLi 9.0 release available #59
-
- Forum Moderator
PLi® Core member - 14,917 posts
+486
Excellent
Posted 27 October 2023 - 08:58
What is the output of
cat /etc/resolv.conf
could be a DNS issue.
You could try to set up the DNS settings manually.
Aan de rand van de afgrond is een stap voorwaarts niet altijd vooruitgang....
On the edge of the abyss, a step forward is not always progress....
Hardware: 2x Daily used Vu+ Ultimo 4K - Vu+ Duo 4K SE and a lot more.... - VisioSat BiBigsat - Jultec Unicable Multiswitch 4 positions: 19.2/23.5/28.2 East - Diseqc motorized flatdish antenna
Software : HomeBuild OpenPLi Develop and Scarthgap builds, local cards driven by OsCam
Press the 
button on the buttom right of this message
Have you tried our wiki yet? Many answers can be found in our OpenPLi wiki
Re: OpenPLi 9.0 release available #60
-
- Senior Member
- 105 posts
+1
Neutral
Posted 27 October 2023 - 09:20
What is the output of
cat /etc/resolv.confcould be a DNS issue.
You could try to set up the DNS settings manually.
I have google dns and when backing to 8.3 with same settings it works!
8 user(s) are reading this topic
0 members, 8 guests, 0 anonymous users
