75 replies to this topic

[dany]

openmultiboot selector is disappeared from powemenu list after updated  (openpli-develop 16-6-2024) image

i was on openpli-develop ( slot 2) i did software update ... after updates ..  the receiver restarted to recovery slot 0  instead of openpli-develop

i use openpli 9.0 as recovery slot 0
slot 1 openpli 8.3
slot 2 openpli-develop
slot 3 openpli 9.0

I think there were many updates today and that contains  kernel files. thats why the problem occurred... its because of Kernel updates

I think after these kernel updates, i must delete everything and Start over using the openpli-develop as recovery (slot 0)  instead of the openpli 9.0 to fix it

 

second problem is dreamboxedit .. i can not connect with my vuduo4k

 

regards

[WanWizard]

OpenMultiboot? Or the multiboot built into the image?

 

If the latter: there seems to be some VU+ BSP system package that isn't multiboot compatible, and breaks it when updating. We haven't found which package it is yet.

 

If slot 0 stil boots:

• telnet into it
• connect storage with 8GB+ space (depending on the box model)
• save the existing multibox slots:
  cd /media/<device>
  tar -czf linuxrootfs1.tar.gz /linuxrootfs1
  tar -czf linuxrootfs2.tar.gz /linuxrootfs2
  tar -czf linuxrootfs3.tar.gz /linuxrootfs3
• flash the box with a new image from USB (a new recovery)
• boot it, reactivate kexec multiboot again
• after the reboot, telnet into it
• restore the multiboot slots:
  cd /
  tar -xzf /media/<device>/linuxrootfs1
  tar -xzf /media/<device>/linuxrootfs2
  tar -xzf /media/<device>/linuxrootfs3
• restart, you should now be able to select and boot your multiboot slots again

 

Had the same problem last night...
 

[dany]

sorry i mean multiboot into the image

regards

[dany]

i can't connect my vuduo4k with dreamboxedit , i always got this error :

failed to connect to the dreambox on ip adre 192.168.xxx.xxx.......... (port 80)

these things only happened today with openpli-develop 16.6.2024 because of kernel updates

how to connect my box with dreamboxedit ?

 

regards

[WanWizard]

I didn't mention dreamboxedit anywhere? Why whould you want to use that, your rescue slot should not be used and contain any channel lists?

[dany]

Let's forget the multiboot-kernel problems.. Can you connect your box to this program now (dreamboxedit)?
it's impossible now to connect your box with dreamboxedit if you are using openpli-develop

regards

[WanWizard]

You fail to understand the problem.

 

Your slot 0 rescue image is the one that boots up, because the kexec multiboot installation is broken. And it only boots partly, because lots of kernel / operating system stuff is missing.

 

So it is not only unusable, it also does not contain anything for which dreamboxedit could be useful. So I don't understand why you insist on using it, it is a tool for channel lists, and your rescue slot does not contain channel list, it does not even contain a fully working Enigma.

 

There are only two options: either use my instructions and save your slot1/2/3 images, or just flash from USB and lose everything.

[dany]

My friend , I understand you very well
But now i use only this image (openpli-develop) on flash and do not use multiboot .. just openpli-develop on flash .. i flashed from usb and lost all of them
I have one backup of channels on my computer that i want to send to the box through this program( dreamboxedit)

 

regards

Edited by dany, 16 June 2024 - 17:56.

[WanWizard]

Then why didn't you say so? I can't smell from here what you have or haven't done.

 

DreamboxEdit works fine with every version of OpenPLi, so either something is wrong in your DBE settings, or something is wrong in your OpenWebif settings on the box.

 

If it fails to connect at all, start by checking if you have the correct IP address.

[WanWizard]

p.s. if you currently don't have kexec installed, could you post the contents of /proc/cmdline from your box?

 

We've found the problem, now looking for a fix...

[dany]

i flashed my box 10 min ago with openpli 9.0 ...please just wait 5 min to reflash openpli-develop

regards

[dany]

lol ... its empty

i reflashed my box using openpli 9.0 backup-restore

i found another problem ,,, now if i press on plugins ,, i see some plugins are not avaliable ( extensions/openwebif( srting index out of range)

regards

Edited by dany, 16 June 2024 - 19:02.

[dany]

do you want to upload for you the file ( cmdline )

[dany]

here is the file

Attached Files

•  cmdline.zip   148bytes   1 downloads

Edited by dany, 16 June 2024 - 19:01.

[WanWizard]

You didn't reflash properly, seems you're still running with the half broken image that was in slot 0.

 

One of the symptoms of the broken kernel is that parts of /proc and /sys are missing.

[dany]

strange ,, its fixed

i reflashed my box with openpli-develop 16-6-2024 , i checked update now and found 17 updates ( gstreamer -enigma info files )

 

after update the problem fixed

 

regards

[WanWizard]

So you now have a /proc/cmdline file with contents?

[dany]

no ,,, it was still empty

but after used the multiboot i found this content

kexec=1 rootfstype=ext4 rootflags=data=journal rootwait rw coherent_pool=2M vmalloc=500m bmem=891m@1156m bmem=575m@3520m kernel=/zImage root=/dev/mmcblk0p9 rootsubdir=linuxrootfs0

Edited by dany, 16 June 2024 - 19:25.

[WanWizard]

Thanks, but I have that one. I was interested to see with the "kernel=" parameter was without kexec installed.

 

I'll try to find a test box.

[dany]

i flashed my box with openpli-develop 18-6-2024

hdd and usb mounted as well ... no problems  ... look to the foto ( hdd-usb mount before update )

after flashed my box i checked for updates .. i found 3 updates  .. look to these fotos  ( check for  update found - 3 updates found )

after updat and reboot .. my hdd mount changed from media/hdd to media/sda1 .. look to the foto (hdd-usb mount after update)

regard

Attached Files

•  hdd-usb mount before update.png   920.57KB   1 downloads
•  check for update found.png   818.2KB   1 downloads
•  3 updates found.png   661.31KB   1 downloads
•  hdd-usb mount after update.png   813.63KB   0 downloads

Edited by dany, 18 June 2024 - 14:40.