Find content
Undisclosed
Display name history
.... you removed resolvconf twice, do openresolv as well.
#1397874 Enigma crash
Posted by
on 28 October 2021 - 16:01
#1367998 no way to connect to ssh via authorized_keys
Posted by
on 27 July 2021 - 16:55
... it's connected to your home network, so there's plenty more to compromise.
#1242838 OpenPLi 7.3 Release available.
Posted by
on 8 August 2020 - 14:11
.... a settings backup before updating would have made life a lot easier.
#1194714 Zgemma h9s blindscan
Posted by
on 29 April 2020 - 14:03
-v option should give you more detail.
#1194282 Zgemma h9s blindscan
Posted by
on 28 April 2020 - 18:33
Maybe this will help, no guarantees, just googling.....
usage: blindscan-s2 -b : run blind scan -T : Tune a specific transponder -H : only scan horizontal polarity -V : only scan vertical polarity -N : no polarity -i : interactive mode -m : monitor signal mode -M : monitor and re-tune each time -a number : adapter number (default 0) -f number : frontend number (default 0) -F number : fec (default auto) -s number : starting transponder frequency in MHz (default 950) -e number : ending transponder frequency in MHz (default 1450) -d number : delivery system 4=DSS 5=DVB-S 6=DVB-S2 (default 0) -t number : step value for scan in MHz (default 20) -R number : amount of times to try tuning each step (default 1) -r number : symbol rate in MSym/s (default 16000) -l number : local oscillator frequency of LNB (default 0) -2 : enable 22KHz tone (default OFF) -c number : use DiSEqC COMMITTED switch position N (1-4) -u number : use DiSEqC uncommitted switch position N (1-4) -U N.N : orbital position for USALS -G N.N : site longtude -A N.N : site latitude -W number : seconds to wait after usals motor move (default 45) -v : verbose Example: Default scans L-band range in steps of 20 on H and V polarity blindscan-s2 -b Scan 11700-11900 vertical in steps of 10, and calculate for lof blindscan-s2 -b -s 11700 -e 11900 -V -t 10 -l 10750
#1009565 Three tasks I am failing at: can they be done?
Posted by
on 29 January 2019 - 20:28
Can do 1. (on ViX), last scanned has tv and radio, so select radio to listen and then you can view tv epg.
I'm sure there is a more elegant way to do it.
#938858 Unicable / simultaneous recordings
Posted by
on 25 September 2018 - 13:54
We had a commit some time ago to cater for the following situation:
Timer A ends 20:00 (inclusive of offsets)
Timer B starts at 20:00 (inclusive of offsets).
Until the commit was made, this would always clash when in reality timers were one after the other. Does anybody remember it? If so, can you post a link please? Thanks
https://github.com/o...c545a49afc17764
