Jump to content


Photo

RT3070 Wlan driver on Openpli 3.0

VU Duo

  • Please log in to reply
3 replies to this topic

#1 rowe

  • Member
  • 10 posts

0
Neutral

Posted 20 November 2012 - 08:43

Hi,

my wifi-stick, Dlink dwa-140 rev B2 (lsusb id 07d1:3c0a) doesn't work properly with the RT2800usb driver. With this driver I
have very poor performance, packet drops etc.

With OpenPli 2.1 (kernel 2.6) there was no problem at all with this wifi-sick, but on the other hand the driver on kernel 2.6
was RT3070sta.

So, is it possible to install RT3070sta driver on OpenPli 3.0 with kernel 3.1.1? If so, can someone put it on feed again?

regards
Ronnie

Re: RT3070 Wlan driver on Openpli 3.0 #2 malakudi

  • Senior Member
  • 1,449 posts

+69
Good

Posted 20 November 2012 - 18:55

Try to disable power management of wlan interface to see if you have improved performance.
From telnet, run:

iwconfig wlan0 power off

and report back.

Re: RT3070 Wlan driver on Openpli 3.0 #3 rowe

  • Member
  • 10 posts

0
Neutral

Posted 20 November 2012 - 21:34

Hi again,

I have tested the above suggestion to disable power management, but with no improvement for stability/performance :-(

//Ronnie

Re: RT3070 Wlan driver on Openpli 3.0 #4 malakudi

  • Senior Member
  • 1,449 posts

+69
Good

Posted 20 November 2012 - 22:44

Unfortunately in 3.x linux kernels the support fot the old ralink drivers have been replaced by the rt2x00 drivers. Various instability issues are fixed with the trick I mentioned above. It's a pitty it didn't work for you. I will try to check if the driver for 3.6 kernel is any different than 3.1 kernel (I use ET9X00 and it has 3.6 kernel).



Also tagged with one or more of these keywords: VU Duo

1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users