root@dm8000:/proc/stb/sensors# cat /proc/buddyinfo Node 0, zone Normal 354 140 32 4 0 0 0 0 0 0 0
Edited by Erik Slagter, 20 July 2013 - 18:22.
DM8000 : enigma2 start opnieuw op bij aanvang 2e of 3e opname.
Started by Gerard76, 24 Jun 2013 20:09
DM8000 opname
108 replies to this topic
Re: DM8000 : enigma2 start opnieuw op bij aanvang 2e of 3e opname. #81
-
- PLi® Core member
- 46,969 posts
+541
Excellent
Posted 20 July 2013 - 18:22
En cat buddyinfo?
* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.
Re: DM8000 : enigma2 start opnieuw op bij aanvang 2e of 3e opname. #82
-
- Senior Member
- 101 posts
0
Neutral
Posted 21 July 2013 - 08:35
En cat buddyinfo?
root@dm8000:/proc/stb/sensors# cat /proc/buddyinfo Node 0, zone Normal 354 140 32 4 0 0 0 0 0 0 0
cat: can't open 'buddyinfo': No such file or directory
Re: DM8000 : enigma2 start opnieuw op bij aanvang 2e of 3e opname. #83
-
- PLi® Core member
- 46,969 posts
+541
Excellent
Posted 21 July 2013 - 08:44
Oh sorry, volledige pad vergeten, ik stond al in /proc. Dus: cat /proc/buddyinfo.
* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.
Re: DM8000 : enigma2 start opnieuw op bij aanvang 2e of 3e opname. #84
-
- Senior Member
- 101 posts
0
Neutral
Posted 21 July 2013 - 08:53
Oh sorry, volledige pad vergeten, ik stond al in /proc. Dus: cat /proc/buddyinfo.
node 0, zone Normal 255 404 170 131 110 16 6 4
1 1 0
Re: DM8000 : enigma2 start opnieuw op bij aanvang 2e of 3e opname. #85
-
- PLi® Core member
- 46,969 posts
+541
Excellent
Posted 21 July 2013 - 09:00
Erik:
Wat je nu zou moeten doen is dit regelmatig opvragen en dan de output posten zo vlak mogelijk voor een crash. Idem dmesg -c.
Node 0, zone Normal 354 140 32 4 0 0 0 0 0 0 0CodeW
node 0, zone Normal 255 404 170 131 110 16 6 4 1 1 0Dit suggereert dat jij aanzienlijk meer vrij aaneengesloten geheugen hebt dan ik. Komt misschien ook door de swap.
Wat je nu zou moeten doen is dit regelmatig opvragen en dan de output posten zo vlak mogelijk voor een crash. Idem dmesg -c.
* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.
Re: DM8000 : enigma2 start opnieuw op bij aanvang 2e of 3e opname. #86
-
- Senior Member
- 101 posts
0
Neutral
Posted 21 July 2013 - 14:37
Erik:
Node 0, zone Normal 354 140 32 4 0 0 0 0 0 0 0CodeWnode 0, zone Normal 255 404 170 131 110 16 6 4 1 1 0Dit suggereert dat jij aanzienlijk meer vrij aaneengesloten geheugen hebt dan ik. Komt misschien ook door de swap.
Wat je nu zou moeten doen is dit regelmatig opvragen en dan de output posten zo vlak mogelijk voor een crash. Idem dmesg -c.
21-7-2013
13.45 uur
Node 0, zone, Normal 565 12 0 0 0 0 0 0 0 0 0
13.50 uur
Node 0, zone, Normal 618 16 9 0 0 0 0 0 0 0 0
15.05 uur DM8000 in radio-ontvangst. Klok staat stil, muziek speelt door, via netwerk niet meer bereikbaar.
Re: DM8000 : enigma2 start opnieuw op bij aanvang 2e of 3e opname. #87
-
- Senior Member
- 1,527 posts
+57
Good
Posted 21 July 2013 - 15:13
Voor 10 euro heb je al een 3draads fan, in de buurt van de cpu laten koelen.
Vooral met dit weer heb je anders continue dat jou box hem gaat hangen
Vooral met dit weer heb je anders continue dat jou box hem gaat hangen
Re: DM8000 : enigma2 start opnieuw op bij aanvang 2e of 3e opname. #88
-
- PLi® Core member
- 46,969 posts
+541
Excellent
Posted 21 July 2013 - 15:26
Vooral deze is toch ook niet best...13.45 uur
Node 0, zone, Normal 565 12 0 0 0 0 0 0 0 0 0
Doe je veel met netwerk?
Edited by Erik Slagter, 21 July 2013 - 15:26.
* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.
Re: DM8000 : enigma2 start opnieuw op bij aanvang 2e of 3e opname. #89
-
- PLi® Core member
- 46,969 posts
+541
Excellent
Posted 21 July 2013 - 15:29
Voor 10 euro heb je al een 3draads fan, in de buurt van de cpu laten koelen.
Vooral met dit weer heb je anders continue dat jou box hem gaat hangen
Ik zou er dan meteen een koelplaatje op zetten. Heb ik ook ooit gedaan toen hij continu vastliep. Als je toevallig koelpasta in huis hebt (en een koelplaatje) is dat ideaal.
Bleek toen overigens een driver bug te zijn 
Sindsdien is die er weer uit.
Wat is bij jou de temperatuur nu?
root@dm8000:~# cat /proc/stb/sensors/*/* undefined C 45 undefined C 43 undefined C 51 undefined C 52 undefined C 51 undefined C 39 undefined C 47 undefined C 45
* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.
Re: DM8000 : enigma2 start opnieuw op bij aanvang 2e of 3e opname. #90
-
- Senior Member
- 101 posts
0
Neutral
Posted 21 July 2013 - 16:22
Voor 10 euro heb je al een 3draads fan, in de buurt van de cpu laten koelen.
Vooral met dit weer heb je anders continue dat jou box hem gaat hangenIk zou er dan meteen een koelplaatje op zetten. Heb ik ook ooit gedaan toen hij continu vastliep. Als je toevallig koelpasta in huis hebt (en een koelplaatje) is dat ideaal.
Bleek toen overigens een driver bug te zijn
Wat is bij jou de temperatuur nu?
root@dm8000:~# cat /proc/stb/sensors/*/* undefined C 45 undefined C 43 undefined C 51 undefined C 52 undefined C 51 undefined C 39 undefined C 47 undefined C 45
dm8000 login: root
dreambox
root@dm8000:~# dreambox
-sh: dreambox: not found
root@dm8000:~# [6ncat /proc/buddyinfo
Node 0, zone Normal 35 14 2 80 81 6 2 0 1 3 3
root@dm8000:~# [6ncat /proc/buddyinfo
Node 0, zone Normal 35 13 2 80 81 6 2 0 1 3 3
root@dm8000:~# [6ncat /proc/buddyinfo
Node 0, zone Normal 5 13 2 80 81 6 2 0 1 3 3
root@dm8000:~# [6ncat /proc/buddyinfo
Node 0, zone Normal 5 13 2 80 81 6 2 0 1 3 3
root@dm8000:~# [6ncat /proc/buddyinfo
Node 0, zone Normal 2 8 2 80 81 6 2 0 1 3 3
root@dm8000:~# [6ncat /proc/stb/sensors/*/*
undefined
C
36
undefined
C
39
undefined
C
43
undefined
C
45
undefined
C
35
undefined
C
33
undefined
C
43
undefined
C
41
root@dm8000:~# [6n
Ik moest weer resetten. Nu heb ik een ventilator bij de dm8000 gezet. Ik heb geen spullen zo gauw in huis.
Re: DM8000 : enigma2 start opnieuw op bij aanvang 2e of 3e opname. #91
-
- Senior Member
- 101 posts
0
Neutral
Posted 21 July 2013 - 18:30
De ventilator staat nu ongeveer 2 uur tegen de dm8000 aan te blazen. Ik heb nu wat meetgegevens verzameld.
openpli 3.0 dm8000
dm8000 login: root@dm8000:~# dreambox
-sh: dreambox: not found
root@dm8000:~# [6ndmesg -c
>end_request: I/O error, dev mtdblock1, sector 8
uncorrectable error :
uncorrectable error :
end_request: I/O error, dev mtdblock1, sector 16
uncorrectable error :
uncorrectable error :
end_request: I/O error, dev mtdblock1, sector 24
uncorrectable error :
uncorrectable error :
end_request: I/O error, dev mtdblock1, sector 0
uncorrectable error :
uncorrectable error :
end_request: I/O error, dev mtdblock0, sector 0
uncorrectable error :
uncorrectable error :
end_request: I/O error, dev mtdblock0, sector 8
uncorrectable error :
uncorrectable error :
end_request: I/O error, dev mtdblock0, sector 16
uncorrectable error :
uncorrectable error :
end_request: I/O error, dev mtdblock0, sector 24
uncorrectable error :
uncorrectable error :
end_request: I/O error, dev mtdblock0, sector 0
stb_core: module license 'Proprietary' taints kernel.
Disabling lock debugging due to kernel taint
fpga init
done OK 0
enter base init, xvd 20100413, vdc 20100413, rap 20101005, xpt 20110228
!!! kernMemSize: 154 MB
smca set muxes
smcb set muxes
smcc set muxes
10:551002727 SMCA: controller reset timed out
10:561010236 SMCB: controller reset timed out
register adapter
register adapter
register adapter
register adapter
register adapter
FP Version 7
input: dreambox front panel as /devices/virtual/input/input0
maskffffffff
using fpga version 2a
tsmux set tsports reg 02 to val dc
tsmux set tsports reg 02 to val dc
tsmux set tsports reg 03 to val fe
tsmux set tsports reg 03 to val fe
tsmux set ciclk reg fe to val 00
tsmux set cisource reg 00 to val 55
tsmux set ciclk reg fe to val 00
tsmux set cisource reg 00 to val 55
tsmux set ciclk reg fe to val 00
tsmux set cisource reg 01 to val 55
tsmux set ciclk reg fe to val 00
tsmux set cisource reg 01 to val 55
set sb to 3(2)
set fb to 2(-1)
set input to 0
set fb to 2(-1)
bcm_video_analog_port_setup (fmt=7)
SET FORMAT: display[1], format=7
display 0 uses vbi path 1
display 1 uses vbi path 0
HDMI: now powered down
Write AVS: 40 40 00 00 00 00 00 03 00 02 00 00 00 ff
Write AVS: 40 40 00 00 00 00 18 63 00 02 00 00 00 ff
set sb to 3(2)
set sb to 3(2)
HDMI: EDID read ok
HDMI: initial mode set!
using 50.00Hz as MonitorRefreshRate
SET FORMAT: display[0], format=37
HDMI mode
use EDID to detect colorspace
using colorspace: 1
set fb to 2(0)
bcm_video_analog_port_setup (fmt=7)
SET FORMAT: display[1], format=7
disable wss on display 0
disable wss on display 1
bcmfb: creating surface with pixel format 0x07e48888 (BPXL_eA8_R8_G8_B8)
enable mad
VIDEO0: set fallback framerate to 60000
VIDEO0: set progressive override mode to 1
VIDEO0: set streamtype!
set MPEG2
sw rave disabled!
enable mad
VIDEO1: set fallback framerate to 60000
VIDEO1: set progressive override mode to 1
VIDEO1: set streamtype!
set MPEG2
sw rave disabled!
sync is off so we enable it
playback!
total video delay: 0 (0 ms)
VIDEO0: start decode
flush video decoder
bcm_mpeg_decoder_get_pts: 122 callbacks suppressed
VIDEO0 got pts failed !!!! (ret 0)
set ac3 to downmix
set aac to downmix
init ALSA!
VIDEO0: first pts 0x0
DVB: registering new adapter (BCM7400)
autodetecting NIMs...
ret: -145, feid: 00
enable tsm0
ret: 2, feid: 01
Found: Slot D, ID: 01 (by CA)
Initializing adapter 0 (BCM4501 (internal)-DVB-S2)
bcm4501: found 4501, revision 2(c0)
bcm4501: bcm_initAP
bcm4501: upload & start firmware
bcm4501: ap not running - start now
bcm4501: uCode 0x72
DVB: registering adapter 0 frontend 0 (bcm4501)...
Initializing adapter 1 (BCM4501 (internal)-DVB-S2)
DVB: registering adapter 0 frontend 1 (bcm4501)...
Initializing adapter 3 (Philips CU1216Mk3-DVB-C)
DVB: registering adapter 0 frontend 2 (CU1216Mk3)...
VIDEO0: stop decode
no decoder left in sync handling so disable xpt_sync
CI stopped...
CI stopped...
CI stopped...
CI stopped...
registered vtuner misc/vtuner0, minor 52
registered vtuner misc/vtuner1, minor 51
IR-TX init!
input: dreambox remote control (native) as /devices/virtual/input/input1
input: dreambox advanced remote control (native) as /devices/virtual/input/input2
input: dreambox ir keyboard as /devices/virtual/input/input3
input: dreambox ir mouse as /devices/virtual/input/input4
NET: Registered protocol family 10
ath_hal: 2009-05-08 (AR5210, AR5211, AR5212, AR5416, RF5111, RF5112, RF2413, RF5413, RF2133, RF2425, REGOPS_FUNC, XR)
wlan: svn r3314
ath_pci: svn r3314
4017366 ms:
Adding 65532k swap on /media/hdd/swapfile. Priority:-1 extents:2 across:90108k
140 ms: 06
26 ms: 10
using 50.00Hz as MonitorRefreshRate
SET FORMAT: display[0], format=27
HDMI mode
use EDID to detect colorspace
using colorspace: 1
bcm_video_analog_port_setup (fmt=7)
SET FORMAT: display[1], format=7
set current avs auto aspect to 16:9
disable wss on display 0
disable wss on display 1
set sb to 3(1)
Write AVS: 40 40 00 00 00 00 18 61 00 02 00 00 00 ff
VIDEO0: set blank to 0
650 ms: 20
sync is off so we enable it
playback!
total video delay: 0 (0 ms)
VIDEO0: start decode
flush video decoder
VIDEO0: first pts 0x0
VIDEO0: framerate changed 3
VIDEO0: resolution changed (1280 720)
VIDEO0: aspect changed 3
set current avs auto aspect to 16:9
disable wss on display 0
disable wss on display 1
set current avs auto aspect to 16:9
disable wss on display 0
disable wss on display 1
set sb to 3(1)
enable tsm0
VIDEO0: set blank to 0
VIDEO0: stop decode
VIDEO0: set blank to 0
no decoder left in sync handling so disable xpt_sync
ADDRCONF(NETDEV_UP): wlan0: link is not ready
2755 ms: 30
95 ms: 40
wlan0: authenticate with f8:d1:11:88:4b:08 (try 1)
wlan0: authenticated
wlan0: associate with f8:d1:11:88:4b:08 (try 1)
wlan0: RX AssocResp from f8:d1:11:88:4b:08 (capab=0x431 status=0 aid=3)
wlan0: associated
ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
VIDEO0: set blank to 0
sync is off so we enable it
playback!
total video delay: 0 (0 ms)
VIDEO0: start decode
flush video decoder
VIDEO0: first pts 0x0
enable tsm0
VIDEO0: set blank to 0
VIDEO0: stop decode
VIDEO0: set blank to 0
no decoder left in sync handling so disable xpt_sync
bcm_accel: invalid opcode! 00000080
bcmfb: enable manual blit
bcmfb: creating surface with pixel format 0x07e48888 (BPXL_eA8_R8_G8_B8)
tsmux set cisource reg 00 to val 54
tsmux set cisource reg 00 to val 44
tsmux set cisource reg 01 to val 54
tsmux set cisource reg 01 to val 44
tsmux set tsports reg 02 to val dc
tsmux set tsports reg 02 to val dc
tsmux set tsports reg 03 to val fe
tsmux set tsports reg 03 to val fe
bcm4501: channel 0 is in normale mode now
bcm4501: channel 0 is sleeping now
bcm4501: channel 1 is in normale mode now
bcm4501: channel 1 is sleeping now
tda: init complete
set current avs auto aspect to 16:9
disable wss on display 0
disable wss on display 1
set sb to 3(1)
set current avs auto aspect to 16:9
disable wss on display 0
disable wss on display 1
set sb to 3(1)
VIDEO0: dst_left, dst_top, dst_width and dst_height is 0.. reset to defaults!
set current avs auto aspect to 16:9
disable wss on display 0
disable wss on display 1
set sb to 3(1)
set current avs auto aspect to 16:9
disable wss on display 0
disable wss on display 1
set sb to 3(1)
VIDEO1: dst_left, dst_top, dst_width and dst_height is 0.. reset to defaults!
6406 ms: 50
5 ms: 50
56 ms: 50
29 ms: 50
167 ms: 50
656 ms: 50
484 ms: 52
11 ms: 53
3 ms: 53
2 ms: 53
eth0: no IPv6 routers present
wlan0: no IPv6 routers present
3731 ms: 53
7 ms: 65
94 ms: 65
87 ms: 65
2 ms: 65
14 ms: 65
2 ms: 65
2 ms: 65
16 ms: 65
22 ms: 65
165 ms: 65
8 ms: 66
17 ms: 66
26 ms: 66
11 ms: 66
19 ms: 66
2 ms: 66
3 ms: 66
10 ms: 66
980 ms: 66
10 ms: 69
66 ms: 69
2 ms: 69
48 ms: 69
3 ms: 69
2 ms: 69
5 ms: 69
15 ms: 69
15 ms: 69
3 ms: 69
bcmfb: creating surface with pixel format 0x07e48888 (BPXL_eA8_R8_G8_B8)
388 ms: 69
145 ms: 70
824 ms: 71
Write AVS: 40 40set current avs auto aspect to 16:9
disable wss on display 0
disable wss on display 1
00set current avs auto aspect to 16:9
disable wss on display 0
disable wss on display 1
00 00 00 00 61disable wss on display 0
set wss 7 on display 1
00 02 00 00 00 ff
set sb to 3(1)
set sb to 3(1)
set input to 0
set fb to 2(0)
set current avs auto aspect to 16:9
disable wss on display 0
set wss 7 on display 1
set sb to 3(1)
set ac3 to passthrough
85 ms: 73
22 ms: 73
188 ms: 73
275 ms: 74
30 ms: 74
57 ms: 74
39 ms: 75
tsmux set ciclk reg fe to val 10
tsmux set ciclk reg fe to val 30
tsmux set ciclk reg fe to val 70
tsmux set ciclk reg fe to val f0
48 ms: 75
3 ms: 75
8 ms: 75
40 ms: 75
121 ms: 75
32 ms: 75
12 ms: 75
54 ms: 75
557 ms: 75
80 ms: 76
648 ms: 77
39 ms: 78
23 ms: 79
272 ms: 79
113 ms: 79
81 ms: 80
150 ms: 80
1818 ms: 80
294 ms: 85
5 ms: 86
8 ms: 86
52 ms: 86
174 ms: 86
13 ms: 87
22 ms: 87
24 ms: 87
356 ms: 87
14 ms: 88
21 ms: 88
3 ms: 88
77 ms: 88
84 ms: 88
21 ms: 88
31 ms: 88
66 ms: 88
22 ms: 89
21 ms: 89
229 ms: 89
57 ms: 89
10 ms: 89
3 ms: 89
119 ms: 89
397 ms: 90
16 ms: 91
set current avs auto aspect to 16:9
disable wss on display 0
set wss 7 on display 1
set sb to 3(1)
set current avs auto aspect to 16:9
disable wss on display 0
set wss 7 on display 1
set sb to 3(1)
disable wss on display 0
set wss 7 on display 1
set current avs auto aspect to 16:9
disable wss on display 0
set wss 7 on display 1
set sb to 3(1)
set current avs auto aspect to 16:9
disable wss on display 0
set wss 7 on display 1
set sb to 3(1)
set current avs auto aspect to 16:9
disable wss on display 0
set wss 7 on display 1
set sb to 3(1)
disable wss on display 0
set wss 7 on display 1
set current avs auto aspect to 16:9
disable wss on display 0
set wss 7 on display 1
set sb to 3(1)
set current avs auto aspect to 16:9
disable wss on display 0
set wss 7 on display 1
set sb to 3(1)
set current avs auto aspect to 16:9
disable wss on display 0
set wss 7 on display 1
set sb to 3(1)
disable wss on display 0
set wss 7 on display 1
set current avs auto aspect to 16:9
disable wss on display 0
set wss 7 on display 1
set sb to 3(1)
set current avs auto aspect to 16:9
disable wss on display 0
set wss 7 on display 1
set sb to 3(1)
set current avs auto aspect to 16:9
disable wss on display 0
set wss 7 on display 1
set sb to 3(1)
disable wss on display 0
set wss 7 on display 1
set current avs auto aspect to 16:9
disable wss on display 0
set wss 7 on display 1
set sb to 3(1)
set current avs auto aspect to 16:9
disable wss on display 0
set wss 7 on display 1
set sb to 3(1)
set current avs auto aspect to 16:9
disable wss on display 0
set wss 7 on display 1
set sb to 3(1)
set current avs auto aspect to 16:9
disable wss on display 0
set wss 7 on display 1
set sb to 3(1)
set current avs auto aspect to 16:9
disable wss on display 0
set wss 7 on display 1
set sb to 3(1)
disable wss on display 0
set wss 7 on display 1
set current avs auto aspect to 16:9
disable wss on display 0
set wss 7 on display 1
set sb to 3(1)
130 ms: 91
94 ms: 91
306 ms: 92
904 ms: 92
1872 ms: 95
set mute 0 (000) 1
57 ms: 99
11 ms: 99
4 ms: 99
bcm4501: channel 0 is in normale mode now
start pcr0 on dmx 0 pid:e5 index 1
start audio on dmx 0 pid:e5
audio xpt start
sync is off so we enable it
demux-index 0 pcr0pid e5
using 1 as pcr0 pidchannel
MPEG
audio: streamtype set 0
audio: streamtype_set: stop rave
audio: streamtype_set: restart rave
set mute 0 (111) 1
audio: decoder start 2
video delay 0 (0 ms)
total video delay: 0 (0 ms)
VIDEO0: set blank to 0
total video delay: 0 (0 ms)
VIDEO0: start decode
flush video decoder
ch0: lock
VIDEO0: first pts 0x0
RAP first pts 0xccc91fc6, stc 0xccc912ba, pcr valid
VIDEO0: set blank to 0
bcm_mpeg: clip already enabled
flush video decoder
enable tsm0
RAP sampling rate info isr (48000)
eBitRateChange Isr.. set source_changed_event!
eModeChange Isr.. set source_changed_event!
VIDEO0: first pts 0x0
VIDEO0: set blank to 0
VIDEO0: stop decode
VIDEO0: set blank to 0
enable tsm0
stop pcr0 on dmx 0 pid:e5
audio: decoder stop
stop audio on dmx 0 pid:e5
audio: xpt stop(1)
no decoder left in sync handling so disable xpt_sync
bcm_audio_channel_stop(1) done
bcm4501: rolloff 0.25 is not supported!!!!!
start pcr0 on dmx 0 pid:205 index 1
start audio on dmx 0 pid:5c
audio xpt start
sync is off so we enable it
demux-index 0 pcr0pid 205
using 1 as pcr0 pidchannel
AC3
audio: streamtype set 1
audio: streamtype_set: stop rave
passthru
audio: streamtype_set: restart rave
set mute 0 (001) 0
audio: decoder start 0
video delay 0 (0 ms)
total video delay: 0 (0 ms)
VIDEO0: set streamtype!
set H264
sw rave disabled!
audio delay 18000 (200 ms)
total video delay: 18000 (200 ms)
start video0 on dmx 0 pid:205
total video delay: 18000 (200 ms)
VIDEO0: start decode
ch0: lock
RAP first pts 0x138d2f934, stc 0xc249054e, pcr valid
ch0: lock
ch0: lock
ch0: lock
ch0: lock
HDMI: now connected
HDMI: EDID read ok
using 50.00Hz as MonitorRefreshRate
SET FORMAT: display[0], format=27
HDMI mode
use EDID to detect colorspace
using colorspace: 1
bcm_video_analog_port_setup (fmt=7)
RAP sampling rate info isr (48000)
SET FORMAT: display[1], format=7
set current avs auto aspect to 16:9
disable wss on display 0
set wss 7 on display 1
set sb to 3(1)
VIDEO0: first pts 0xc24bf6de
VIDEO0: resolution changed (1920 1080)
enable tsm0
VIDEO0: progressive changed (0)
HDMI: force disconnect!
HDMI: now disconnected
HDMI: now connected
HDMI: EDID read ok
using 50.00Hz as MonitorRefreshRate
SET FORMAT: display[0], format=27
HDMI mode
use EDID to detect colorspace
using colorspace: 1
bcm_video_analog_port_setup (fmt=7)
SET FORMAT: display[1], format=7
set current avs auto aspect to 16:9
disable wss on display 0
set wss 7 on display 1
set sb to 3(1)
stop pcr0 on dmx 0 pid:205
stop video0 on dmx 0 pid:205
VIDEO0: stop decode
VIDEO0: set blank to 1
audio: decoder stop
stop audio on dmx 0 pid:5c
audio: xpt stop(2)
no decoder left in sync handling so disable xpt_sync
bcm_audio_channel_stop(2) done
tda: init complete
VIDEO0: dst_left, dst_top, dst_width and dst_height is 0.. reset to defaults!
tda: afc=0 (0 Hz)
set current avs auto aspect to 16:9
disable wss on display 0
set wss 7 on display 1
set sb to 3(1)
start pcr0 on dmx 0 pid:65 index 1
start audio on dmx 0 pid:23
audio xpt start
sync is off so we enable it
demux-index 0 pcr0pid 65
using 1 as pcr0 pidchannel
AC3
audio: decoder start 0
audio delay 18000 (200 ms)
total video delay: 18000 (200 ms)
start video0 on dmx 0 pid:65
total video delay: 18000 (200 ms)
VIDEO0: start decode
ch0: lock
RAP first pts 0x2cdc7d2a, stc 0xa0e93cd8, pcr valid
RAP pts error 0 PTS 0x166e3e95, STC 0x50749e6e, type 0
ch0: lock
RAP pts error 0 PTS 0x166e3e95, STC 0x5074a3f9, type 1
ch0: lock
RAP sampling rate info isr (48000)
bcm4501: channel 0 is sleeping now
VIDEO0: first pts 0xa0ecc00e
enable tsm0
root@dm8000:~# [6n
root@dm8000:~# [6ncat /proc/buddyinfo
Node 0, zone Normal 466 33 0 0 0 0 0 0 0 0 0
root@dm8000:~# [6n
root@dm8000:~# [6ncat /proc/stb/sensors/*/*
undefined
C
34
undefined
C
36
undefined
C
39
undefined
C
44
undefined
C
33
undefined
C
30
undefined
C
39
undefined
C
38
root@dm8000:~# [6n
Ik ben nieuwsgierig of jullie al verbeteringen vinden in de situatie. Vast bedankt!!!
Re: DM8000 : enigma2 start opnieuw op bij aanvang 2e of 3e opname. #92
-
- PLi® Core member
- 46,969 posts
+541
Excellent
Posted 21 July 2013 - 18:35
Jouw temperatuur is lager dan die van mij.
Ik zie wel flash read errors. Wanneer heb je voor het laatst geflasht? Heb je wel eens de flash-reparatie-tool van DMM gebruikt?
* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.
Re: DM8000 : enigma2 start opnieuw op bij aanvang 2e of 3e opname. #93
-
- Senior Member
- 101 posts
0
Neutral
Posted 21 July 2013 - 19:21
Jouw temperatuur is lager dan die van mij.
Ik zie wel flash read errors. Wanneer heb je voor het laatst geflasht? Heb je wel eens de flash-reparatie-tool van DMM gebruikt?
De laatste flash deed ik 14 juli na de herformattering van de hdd.
De tool die je noemt ken ik niet. Wel heb ik enkele weken geleden met Dreamup de bootloader 84 er opnieuw op gezet. Maar je bedoelt misschien iets anders.
Re: DM8000 : enigma2 start opnieuw op bij aanvang 2e of 3e opname. #94
-
- PLi® Core member
- 46,969 posts
+541
Excellent
Posted 22 July 2013 - 08:55
Ik dacht dat het een aparte tool was, maar misschien zit het ook wel in DreamUp, probeer die eens? Je moet er wel rekening mee houden dat je daarna zowiezo opnieuw moet flashen.
Edited by Erik Slagter, 22 July 2013 - 08:55.
* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.
Re: DM8000 : enigma2 start opnieuw op bij aanvang 2e of 3e opname. #95
-
- Senior Member
- 1,112 posts
+10
Neutral
Posted 22 July 2013 - 09:09
Ik dacht dat het een aparte tool was, maar misschien zit het ook wel in DreamUp, probeer die eens? Je moet er wel rekening mee houden dat je daarna zowiezo opnieuw moet flashenin dreamup onder extra
Ik dacht dat het een aparte tool was, maar misschien zit het ook wel in DreamUp, probeer die eens? Je moet er wel rekening mee houden dat je daarna zowiezo opnieuw moet flashen.
met dreamup onder extra recovery bad sectors aanvinken ( deze optie zit bij de laatste dreamups )
Edited by teo1966, 22 July 2013 - 09:10.
VU+ULTIMO4K/HD11/HD530C/HD51/multibox openpli 9.0
Re: DM8000 : enigma2 start opnieuw op bij aanvang 2e of 3e opname. #96
-
- Senior Member
- 101 posts
0
Neutral
Posted 22 July 2013 - 10:15
De ventilator draait.
Bootloader 84 opnieuw geflashed.
Image van vandaag geflashed.
Swapfile is actief
Onderstaande gegevens opgehaald.
Het lijkt mij dat er geen onbehoorlijke dingen meer in staan.
Wat vinden jullie ervan?
openpli 3.0 dm8000
root@dm8000:~# dreambox -sh: dreambox: not found root@dm8000:~# [6ndmesg -c to 3(1) 139 ms: 90 96 ms: 91 45 ms: 91 82 ms: 92 1989 ms: 94 set mute 0 (111) 0 61 ms: 99 20 ms: 99 4 ms: 99 bcm4501: channel 0 is in normale mode now start pcr0 on dmx 0 pid:e5 index 1 start audio on dmx 0 pid:e5 audio xpt start sync is off so we enable it demux-index 0 pcr0pid e5 using 1 as pcr0 pidchannel MPEG audio: decoder start 0 video delay 0 (0 ms) total video delay: 0 (0 ms) VIDEO0: set blank to 0 total video delay: 0 (0 ms) VIDEO0: start decode flush video decoder ch0: lock RAP first pts 0x63e721e2, stc 0x63e71802, pcr valid VIDEO0: first pts 0x0 VIDEO0: set blank to 0 VIDEO0: stop decode VIDEO0: set blank to 0 RAP sampling rate info isr (48000) eBitRateChange Isr.. set source_changed_event! eModeChange Isr.. set source_changed_event! enable tsm0 VIDEO0: set blank to 0 total video delay: 0 (0 ms) VIDEO0: start decode flush video decoder VIDEO0: first pts 0x0 VIDEO0: set blank to 0 VIDEO0: stop decode VIDEO0: set blank to 0 enable tsm0 VIDEO0: dst_left, dst_top, dst_width and dst_height is 0.. reset to defaults! set current avs auto aspect to 16:9 disable wss on display 0 set wss 7 on display 1 set sb to 3(1) VIDEO0: dst_left, dst_top, dst_width and dst_height is 0.. reset to defaults! set current avs auto aspect to 16:9 disable wss on display 0 set wss 7 on display 1 set sb to 3(1) VIDEO0: dst_left, dst_top, dst_width and dst_height is 0.. reset to defaults! set current avs auto aspect to 16:9 disable wss on display 0 set wss 7 on display 1 set sb to 3(1) VIDEO0: dst_left, dst_top, dst_width and dst_height is 0.. reset to defaults! set current avs auto aspect to 16:9 disable wss on display 0 set wss 7 on display 1 set sb to 3(1) stop pcr0 on dmx 0 pid:e5 audio: decoder stop stop audio on dmx 0 pid:e5 audio: xpt stop(1) no decoder left in sync handling so disable xpt_sync bcm_audio_channel_stop(1) done VIDEO0: dst_left, dst_top, dst_width and dst_height is 0.. reset to defaults! set current avs auto aspect to 16:9 disable wss on display 0 set wss 7 on display 1 set sb to 3(1) VIDEO1: dst_left, dst_top, dst_width and dst_height is 0.. reset to defaults! bcm4501: channel 0 is sleeping now bcmfb: disable manual blit VIDEO0: set blank to 0 sync is off so we enable it playback! total video delay: 0 (0 ms) VIDEO0: start decode flush video decoder VIDEO0: first pts 0x0 enable tsm0 VIDEO0: set blank to 0 VIDEO0: stop decode VIDEO0: set blank to 0 no decoder left in sync handling so disable xpt_sync bcm_accel: invalid opcode! 00000080 bcmfb: enable manual blit tsmux set cisource reg 00 to val 44 tsmux set cisource reg 00 to val 44 tsmux set cisource reg 01 to val 34 tsmux set cisource reg 01 to val 44 tsmux set tsports reg 02 to val dc tsmux set tsports reg 02 to val dc tsmux set tsports reg 03 to val fe tsmux set tsports reg 03 to val fe bcm4501: channel 0 is in normale mode now bcm4501: channel 1 is in normale mode now bcm4501: channel 0 is sleeping now bcm4501: channel 1 is sleeping now tda: init complete VIDEO0: dst_left, dst_top, dst_width and dst_height is 0.. reset to defaults! set current avs auto aspect to 16:9 disable wss on display 0 set wss 7 on display 1 set sb to 3(1) VIDEO1: dst_left, dst_top, dst_width and dst_height is 0.. reset to defaults! 682799 ms: 100 15 ms: 50 28 ms: 50 14 ms: 50 125 ms: 50 511 ms: 50 389 ms: 52 15 ms: 54 1 ms: 54 2 ms: 54 3112 ms: 54 8 ms: 66 52 ms: 66 64 ms: 66 2 ms: 66 12 ms: 66 2 ms: 66 2 ms: 66 11 ms: 66 16 ms: 66 140 ms: 66 2 ms: 67 16 ms: 67 19 ms: 67 11 ms: 67 14 ms: 67 2 ms: 67 5 ms: 67 11 ms: 67 842 ms: 67 9 ms: 70 50 ms: 70 2 ms: 70 39 ms: 71 4 ms: 71 3 ms: 71 4 ms: 71 10 ms: 71 10 ms: 71 3 ms: 71 123 ms: 71 138 ms: 71 823 ms: 72 set current avs auto aspect to 16:9 disable wss on display 0 set wss 7 on display 1 set sb to 3(1) set current avs auto aspect to 16:9 disable wss on display 0 set wss 7 on display 1 set sb to 3(1) disable wss on display 0 set wss 7 on display 1 set input to 0 set fb to 2(0) set current avs auto aspect to 16:9 disable wss on display 0 set wss 7 on display 1 set sb to 3(1) set ac3 to passthrough 83 ms: 75 22 ms: 75 138 ms: 75 224 ms: 76 30 ms: 77 63 ms: 77 20 ms: 77 tsmux set ciclk reg fe to val f0 tsmux set ciclk reg fe to val f0 tsmux set ciclk reg fe to val f0 tsmux set ciclk reg fe to val f0 25 ms: 77 3 ms: 77 5 ms: 77 17 ms: 77 62 ms: 77 27 ms: 77 67 ms: 78 336 ms: 78 113 ms: 79 211 ms: 79 1955 ms: 79 370 ms: 87 7 ms: 87 355 ms: 87 17 ms: 87 12 ms: 87 129 ms: 87 14 ms: 88 29 ms: 88 65 ms: 88 57 ms: 88 16 ms: 88 271 ms: 88 42 ms: 89 8 ms: 89 69 ms: 89 134 ms: 90 6 ms: 90 set current avs auto aspect to 16:9 disable wss on display 0 set wss 7 on display 1 set sb to 3(1) set current avs auto aspect to 16:9 disable wss on display 0 set wss 7 on display 1 set sb to 3(1) disable wss on display 0 set wss 7 on display 1 set current avs auto aspect to 16:9 disable wss on display 0 set wss 7 on display 1 set sb to 3(1) set current avs auto aspect to 16:9 disable wss on display 0 set wss 7 on display 1 set sb to 3(1) set current avs auto aspect to 16:9 disable wss on display 0 set wss 7 on display 1 set sb to 3(1) disable wss on display 0 set wss 7 on display 1 set current avs auto aspect to 16:9 disable wss on display 0 set wss 7 on display 1 set sb to 3(1) set current avs auto aspect to 16:9 disable wss on display 0 set wss 7 on display 1 set sb to 3(1) set current avs auto aspect to 16:9 disable wss on display 0 set wss 7 on display 1 set sb to 3(1) disable wss on display 0 set wss 7 on display 1 set current avs auto aspect to 16:9 disable wss on display 0 set wss 7 on display 1 set sb to 3(1) set current avs auto aspect to 16:9 disable wss on display 0 set wss 7 on display 1 set sb to 3(1) set current avs auto aspect to 16:9 disable wss on display 0 set wss 7 on display 1 set sb to 3(1) disable wss on display 0 set wss 7 on display 1 set current avs auto aspect to 16:9 disable wss on display 0 set wss 7 on display 1 set sb to 3(1) set current avs auto aspect to 16:9 disable wss on display 0 set wss 7 on display 1 set sb to 3(1) set current avs auto aspect to 16:9 disable wss on display 0 set wss 7 on display 1 set sb to 3(1) set current avs auto aspect to 16:9 disable wss on display 0 set wss 7 on display 1 set sb to 3(1) set current avs auto aspect to 16:9 disable wss on display 0 set wss 7 on display 1 set sb to 3(1) disable wss on display 0 set wss 7 on display 1 set current avs auto aspect to 16:9 disable wss on display 0 set wss 7 on display 1 set sb to 3(1) 116 ms: 90 94 ms: 91 144 ms: 91 8824 ms: 91 2478 ms: 92 set mute 0 (111) 0 54 ms: 99 11 ms: 99 2 ms: 99 bcm4501: channel 0 is in normale mode now OUVF, rewrite. start pcr0 on dmx 0 pid:e5 index 1 start audio on dmx 0 pid:e5 audio xpt start sync is off so we enable it demux-index 0 pcr0pid e5 using 1 as pcr0 pidchannel MPEG audio: decoder start 0 video delay 0 (0 ms) total video delay: 0 (0 ms) VIDEO0: set blank to 0 total video delay: 0 (0 ms) VIDEO0: start decode flush video decoder VIDEO0: first pts 0x0 ch0: lock VIDEO0: set blank to 0 VIDEO0: stop decode VIDEO0: set blank to 0 RAP first pts 0x67ae8b62, stc 0x67ae8088, pcr valid enable tsm0 VIDEO0: set blank to 0 total video delay: 0 (0 ms) VIDEO0: start decode flush video decoder RAP sampling rate info isr (48000) eBitRateChange Isr.. set source_changed_event! eModeChange Isr.. set source_changed_event! VIDEO0: first pts 0x0 VIDEO0: set blank to 0 VIDEO0: stop decode VIDEO0: set blank to 0 enable tsm0 VIDEO0: dst_left, dst_top, dst_width and dst_height is 0.. reset to defaults! set current avs auto aspect to 16:9 disable wss on display 0 set wss 7 on display 1 set sb to 3(1) stop pcr0 on dmx 0 pid:e5 audio: decoder stop stop audio on dmx 0 pid:e5 audio: xpt stop(1) no decoder left in sync handling so disable xpt_sync bcm_audio_channel_stop(1) done tda: init complete tda: afc=0 (0 Hz) start pcr0 on dmx 0 pid:79 index 1 start audio on dmx 0 pid:7b audio xpt start sync is off so we enable it demux-index 0 pcr0pid 79 using 1 as pcr0 pidchannel AC3 audio: streamtype set 1 audio: streamtype_set: stop rave passthru audio: streamtype_set: restart rave set mute 0 (001) 0 audio: decoder start 0 video delay 0 (0 ms) total video delay: 0 (0 ms) VIDEO0: set streamtype! set H264 sw rave disabled! audio delay 18000 (200 ms) total video delay: 18000 (200 ms) start video0 on dmx 0 pid:79 total video delay: 18000 (200 ms) VIDEO0: start decode bcm4501: channel 0 is sleeping now VIDEO0: dst_left, dst_top, dst_width and dst_height is 0.. reset to defaults! set current avs auto aspect to 16:9 disable wss on display 0 set wss 7 on display 1 set sb to 3(1) stop pcr0 on dmx 0 pid:79 stop video0 on dmx 0 pid:79 VIDEO0: stop decode VIDEO0: set blank to 1 bcm_audio: use saved pts 0x68a79522 (0x0) (ret 0) audio: decoder stop stop audio on dmx 0 pid:7b audio: xpt stop(2) no decoder left in sync handling so disable xpt_sync bcm_audio_channel_stop(2) done start pcr0 on dmx 0 pid:65 index 1 start audio on dmx 0 pid:67 audio xpt start sync is off so we enable it demux-index 0 pcr0pid 65 using 1 as pcr0 pidchannel AC3 audio: decoder start 0 audio delay 18000 (200 ms) total video delay: 18000 (200 ms) start video0 on dmx 0 pid:65 total video delay: 18000 (200 ms) VIDEO0: start decode ch0: lock RAP first pts 0xb0024a92, stc 0xb00241c6, pcr valid ch0: lock ch0: lock ch0: lock ch0: lock VIDEO0: dst_left, dst_top, dst_width and dst_height is 0.. reset to defaults! set current avs auto aspect to 16:9 disable wss on display 0 set wss 7 on display 1 set sb to 3(1) RAP sampling rate info isr (48000) VIDEO0: first pts 0xb004d744 VIDEO0: resolution changed (1920 1080) enable tsm0 VIDEO0: progressive changed (0) stop pcr0 on dmx 0 pid:65 stop video0 on dmx 0 pid:65 VIDEO0: stop decode VIDEO0: set blank to 1 audio: decoder stop stop audio on dmx 0 pid:67 audio: xpt stop(2) no decoder left in sync handling so disable xpt_sync bcm_audio_channel_stop(2) done bcm4501: channel 0 is in normale mode now VIDEO0: dst_left, dst_top, dst_width and dst_height is 0.. reset to defaults! set current avs auto aspect to 16:9 disable wss on display 0 set wss 7 on display 1 set sb to 3(1) bcm4501: rolloff 0.25 is not supported!!!!! start pcr0 on dmx 0 pid:20d index 1 start audio on dmx 0 pid:69 audio xpt start sync is off so we enable it demux-index 0 pcr0pid 20d using 1 as pcr0 pidchannel AC3 audio: decoder start 0 audio delay 18000 (200 ms) total video delay: 18000 (200 ms) start video0 on dmx 0 pid:20d total video delay: 18000 (200 ms) VIDEO0: start decode ch0: lock RAP first pts 0x548ae7a4, stc 0x68162e6, pcr valid RAP pts error 0 PTS 0x2a4573d2, STC 0x0340b175, type 0 ch0: lock RAP sampling rate info isr (48000) VIDEO0: first pts 0x6847390 enable tsm0 VIDEO0: dst_left, dst_top, dst_width and dst_height is 0.. reset to defaults! set current avs auto aspect to 16:9 disable wss on display 0 set wss 7 on display 1 set sb to 3(1) VIDEO0: dst_left, dst_top, dst_width and dst_height is 0.. reset to defaults! set current avs auto aspect to 16:9 disable wss on display 0 set wss 7 on display 1 set sb to 3(1) VIDEO0: dst_left, dst_top, dst_width and dst_height is 0.. reset to defaults! set current avs auto aspect to 16:9 disable wss on display 0 set wss 7 on display 1 set sb to 3(1) VIDEO0: dst_left, dst_top, dst_width and dst_height is 0.. reset to defaults! set current avs auto aspect to 16:9 disable wss on display 0 set wss 7 on display 1 set sb to 3(1) VIDEO0: dst_left, dst_top, dst_width and dst_height is 0.. reset to defaults! set current avs auto aspect to 16:9 disable wss on display 0 set wss 7 on display 1 set sb to 3(1) VIDEO0: dst_left, dst_top, dst_width and dst_height is 0.. reset to defaults! set current avs auto aspect to 16:9 disable wss on display 0 set wss 7 on display 1 set sb to 3(1) VIDEO0: dst_left, dst_top, dst_width and dst_height is 0.. reset to defaults! set current avs auto aspect to 16:9 disable wss on display 0 set wss 7 on display 1 set sb to 3(1) VIDEO0: dst_left, dst_top, dst_width and dst_height is 0.. reset to defaults! set current avs auto aspect to 16:9 disable wss on display 0 set wss 7 on display 1 set sb to 3(1) VIDEO0: dst_left, dst_top, dst_width and dst_height is 0.. reset to defaults! set current avs auto aspect to 16:9 disable wss on display 0 set wss 7 on display 1 set sb to 3(1) stop pcr0 on dmx 0 pid:20d stop video0 on dmx 0 pid:20d VIDEO0: stop decode VIDEO0: set blank to 1 audio: decoder stop stop audio on dmx 0 pid:69 audio: xpt stop(2) no decoder left in sync handling so disable xpt_sync bcm_audio_channel_stop(2) done VIDEO0: dst_left, dst_top, dst_width and dst_height is 0.. reset to defaults! set current avs auto aspect to 16:9 disable wss on display 0 set wss 7 on display 1 set sb to 3(1) OUVF, rewrite. start pcr0 on dmx 0 pid:e5 index 1 start audio on dmx 0 pid:e5 audio xpt start sync is off so we enable it demux-index 0 pcr0pid e5 using 1 as pcr0 pidchannel MPEG audio: streamtype set 0 audio: streamtype_set: stop rave audio: streamtype_set: restart rave set mute 0 (111) 0 audio: decoder start 0 audio delay 18000 (200 ms) total video delay: 18000 (200 ms) VIDEO0: set blank to 0 total video delay: 0 (0 ms) VIDEO0: set streamtype! stop rave set MPEG2 sw rave disabled! video delay 0 (0 ms) total video delay: 0 (0 ms) restart rave VIDEO0: start decode flush video decoder VIDEO0 use saved pts 0xc4a5510 (ret 0) ch0: lock VIDEO0: first pts 0x0 VIDEO0: resolution changed (1280 720) RAP first pts 0x6f5254a2, stc 0x6f524a06, pcr valid VIDEO0: set blank to 0 bcm_mpeg: clip already enabled flush video decoder VIDEO0: first pts 0x0 RAP sampling rate info isr (48000) eBitRateChange Isr.. set source_changed_event! eModeChange Isr.. set source_changed_event! VIDEO0: set blank to 0 VIDEO0: stop decode VIDEO0: set blank to 0 enable tsm0 VIDEO0: progressive changed (1) HDMI: now powered down HDMI: now connected HDMI: EDID read ok using 50.00Hz as MonitorRefreshRate SET FORMAT: display[0], format=27 HDMI mode use EDID to detect colorspace using colorspace: 1 bcm_video_analog_port_setup (fmt=7) SET FORMAT: display[1], format=7 set current avs auto aspect to 16:9 disable wss on display 0 set wss 7 on display 1 set sb to 3(1) HDMI: force disconnect! HDMI: now disconnected HDMI: now connected HDMI: EDID read ok using 50.00Hz as MonitorRefreshRate SET FORMAT: display[0], format=27 HDMI mode use EDID to detect colorspace using colorspace: 1 bcm_video_analog_port_setup (fmt=7) SET FORMAT: display[1], format=7 set current avs auto aspect to 16:9 disable wss on display 0 set wss 7 on display 1 set sb to 3(1) HDMI: now powered down root@dm8000:~# [6n root@dm8000:~# [6ncat /proc/buddyinfo Node 0, zone Normal 29 78 51 49 37 52 19 7 2 1 0 root@dm8000:~# [6ncat /proc/stb/sensors/*/* undefined C 34 undefined C 35 undefined C 38 undefined C 43 undefined C 32 undefined C 29 undefined C 37 undefined C 37 root@dm8000:~# [6n
Re: DM8000 : enigma2 start opnieuw op bij aanvang 2e of 3e opname. #97
-
- PLi® Core member
- 46,969 posts
+541
Excellent
Posted 22 July 2013 - 10:17
Had je ook de "recovery bad sectors" gedaan in DreamUp? (hoewel pieterg nu waarschijnlijk gaat zeggen dat dat daar helemaal niet voor is 
)
* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.
Re: DM8000 : enigma2 start opnieuw op bij aanvang 2e of 3e opname. #98
-
- PLi® Core member
- 32,766 posts
+245
Excellent
Posted 22 July 2013 - 10:35
wat die optie doet, is domweg de bad sector markeringen wissen.
Oftewel, daarna krijg je juist veel meer leesfouten, omdat elke slechte sector opnieuw tijdens gebruik als zodanig herkend en bad gemarkeerd moet worden.
Er is maar 1 reden waarom die optie in dreamup zit, en dat is omdat het in het verleden nog wel eens gebeurde dat door een bug in de bootloader en/of de flash drivers de gehele flash als 'bad' gemarkeerd werd.
Dat kon dan 'hersteld' worden door alle bad markeringen te wissen.
Kortom, niet gebruiken die optie (volgens flash fabrikanten is het zelfs gevaarlijk om bad sectors te blijven wissen).
Oftewel, daarna krijg je juist veel meer leesfouten, omdat elke slechte sector opnieuw tijdens gebruik als zodanig herkend en bad gemarkeerd moet worden.
Er is maar 1 reden waarom die optie in dreamup zit, en dat is omdat het in het verleden nog wel eens gebeurde dat door een bug in de bootloader en/of de flash drivers de gehele flash als 'bad' gemarkeerd werd.
Dat kon dan 'hersteld' worden door alle bad markeringen te wissen.
Kortom, niet gebruiken die optie (volgens flash fabrikanten is het zelfs gevaarlijk om bad sectors te blijven wissen).
Re: DM8000 : enigma2 start opnieuw op bij aanvang 2e of 3e opname. #99
-
- PLi® Core member
- 46,969 posts
+541
Excellent
Posted 22 July 2013 - 10:37
Ja ik kreeg inderdaad opeens zo'n flashback met dat dat iets anders doet dan ik dacht
Maar dan zou puur opnieuw flashen het meeste kans van slagen hebben, niet?
* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.
Re: DM8000 : enigma2 start opnieuw op bij aanvang 2e of 3e opname. #100
-
- Senior Member
- 101 posts
0
Neutral
Posted 22 July 2013 - 10:38
Had je ook de "recovery bad sectors" gedaan in DreamUp? (hoewel pieterg nu waarschijnlijk gaat zeggen dat dat daar helemaal niet voor is
Toen ik de tip van teo1966 las had ik net alles weer draaiend.
Mochten jullie nog slechte toestanden vinden dan is dat nog een mogelijkheid die ik zeker zal gebruiken.
Ik heb de nieuwste Dreamup op mijn pc en ik heb de instelling voor flash-reparatie ook gevonden.
Sinds de actie van vanochtend heeft de dm8000 probleemloos gedraaid en ik hoop dat dat nu dagenlang zo gaat.
Also tagged with one or more of these keywords: DM8000, opname
Dreambox crashed bij starten opnameStarted by tajvdz, 3 Feb 2024  DM8000
|
|
|
||
Tijdens opname afspelenStarted by IkkeKappie, 26 Jul 2023 Opname
|
|
|
||
schrijffout
Schrijffout tijdens de opnameStarted by SEE, 15 Jan 2022 schrijffout, opname, harde schijf and 2 more...
|
|
|
||
Strange mount problemStarted by stdemonac, 21 Jan 2021 DM8000, mount
|
|
|
||
VU + solo SEStarted by LienenSil, 8 Dec 2020 opname, settings
|
|
|
3 user(s) are reading this topic
0 members, 3 guests, 0 anonymous users
