Jump to content


Photo

DM8000 : enigma2 start opnieuw op bij aanvang 2e of 3e opname.

DM8000 opname

  • Please log in to reply
108 replies to this topic

Re: DM8000 : enigma2 start opnieuw op bij aanvang 2e of 3e opname. #81 Erik Slagter

  • PLi® Core member
  • 46,017 posts

+513
Excellent

Posted 20 July 2013 - 18:22

En cat buddyinfo?
root@dm8000:/proc/stb/sensors# cat /proc/buddyinfo 
Node 0, zone   Normal    354    140     32      4      0      0      0      0      0      0      0 

Edited by Erik Slagter, 20 July 2013 - 18:22.

* Wavefrontier T90 with 28E/23E/19E/13E/9E/4.8E/0.8W/5W via SCR switches 2 x 2 x 6 user bands
* Ziggo digital cable TV (FTA)
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.

Re: DM8000 : enigma2 start opnieuw op bij aanvang 2e of 3e opname. #82 CodeW

  • Senior Member
  • 87 posts

0
Neutral

Posted 21 July 2013 - 08:35

En cat buddyinfo?

root@dm8000:/proc/stb/sensors# cat /proc/buddyinfo 
Node 0, zone   Normal    354    140     32      4      0      0      0      0      0      0      0 

cat: can't open 'buddyinfo': No such file or directory



Re: DM8000 : enigma2 start opnieuw op bij aanvang 2e of 3e opname. #83 Erik Slagter

  • PLi® Core member
  • 46,017 posts

+513
Excellent

Posted 21 July 2013 - 08:44

Oh sorry, volledige pad vergeten, ik stond al in /proc. Dus: cat /proc/buddyinfo.
* Wavefrontier T90 with 28E/23E/19E/13E/9E/4.8E/0.8W/5W via SCR switches 2 x 2 x 6 user bands
* Ziggo digital cable TV (FTA)
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.

Re: DM8000 : enigma2 start opnieuw op bij aanvang 2e of 3e opname. #84 CodeW

  • Senior Member
  • 87 posts

0
Neutral

Posted 21 July 2013 - 08:53

Oh sorry, volledige pad vergeten, ik stond al in /proc. Dus: cat /proc/buddyinfo.

node 0, zone Normal 255 404 170 131 110 16 6 4

      1        1        0



Re: DM8000 : enigma2 start opnieuw op bij aanvang 2e of 3e opname. #85 Erik Slagter

  • PLi® Core member
  • 46,017 posts

+513
Excellent

Posted 21 July 2013 - 09:00

Erik:
Node 0, zone   Normal    354    140     32      4      0      0      0      0      0      0      0
CodeW
node 0, zone   Normal    255    404    170    131    110     16      6      4      1      1      0
Dit suggereert dat jij aanzienlijk meer vrij aaneengesloten geheugen hebt dan ik. Komt misschien ook door de swap.

Wat je nu zou moeten doen is dit regelmatig opvragen en dan de output posten zo vlak mogelijk voor een crash. Idem dmesg -c.
* Wavefrontier T90 with 28E/23E/19E/13E/9E/4.8E/0.8W/5W via SCR switches 2 x 2 x 6 user bands
* Ziggo digital cable TV (FTA)
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.

Re: DM8000 : enigma2 start opnieuw op bij aanvang 2e of 3e opname. #86 CodeW

  • Senior Member
  • 87 posts

0
Neutral

Posted 21 July 2013 - 14:37

Erik:

Node 0, zone   Normal    354    140     32      4      0      0      0      0      0      0      0
CodeW
node 0, zone   Normal    255    404    170    131    110     16      6      4      1      1      0
Dit suggereert dat jij aanzienlijk meer vrij aaneengesloten geheugen hebt dan ik. Komt misschien ook door de swap.

Wat je nu zou moeten doen is dit regelmatig opvragen en dan de output posten zo vlak mogelijk voor een crash. Idem dmesg -c.

21-7-2013

13.45 uur

Node 0, zone, Normal 565 12  0  0  0  0  0  0  0  0  0

13.50 uur

Node 0, zone, Normal 618 16  9  0  0  0  0  0  0  0  0

 

15.05 uur DM8000 in radio-ontvangst. Klok staat stil, muziek speelt door, via netwerk niet meer bereikbaar.



Re: DM8000 : enigma2 start opnieuw op bij aanvang 2e of 3e opname. #87 radxnl

  • Senior Member
  • 1,527 posts

+57
Good

Posted 21 July 2013 - 15:13

Voor 10 euro heb je al een 3draads fan, in de buurt van de cpu laten koelen.

Vooral met dit weer heb je anders continue dat jou box hem gaat hangen

Re: DM8000 : enigma2 start opnieuw op bij aanvang 2e of 3e opname. #88 Erik Slagter

  • PLi® Core member
  • 46,017 posts

+513
Excellent

Posted 21 July 2013 - 15:26

13.45 uur

Node 0, zone, Normal 565 12  0  0  0  0  0  0  0  0  0


Vooral deze is toch ook niet best...

Doe je veel met netwerk?

Edited by Erik Slagter, 21 July 2013 - 15:26.

* Wavefrontier T90 with 28E/23E/19E/13E/9E/4.8E/0.8W/5W via SCR switches 2 x 2 x 6 user bands
* Ziggo digital cable TV (FTA)
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.

Re: DM8000 : enigma2 start opnieuw op bij aanvang 2e of 3e opname. #89 Erik Slagter

  • PLi® Core member
  • 46,017 posts

+513
Excellent

Posted 21 July 2013 - 15:29

Voor 10 euro heb je al een 3draads fan, in de buurt van de cpu laten koelen.
Vooral met dit weer heb je anders continue dat jou box hem gaat hangen

Ik zou er dan meteen een koelplaatje op zetten. Heb ik ook ooit gedaan toen hij continu vastliep. Als je toevallig koelpasta in huis hebt (en een koelplaatje) is dat ideaal.

 

Bleek toen overigens een driver bug te zijn :lol: Sindsdien is die er weer uit.

 

Wat is bij jou de temperatuur nu?

root@dm8000:~# cat /proc/stb/sensors/*/*
undefined
C
45
undefined
C
43
undefined
C
51
undefined
C
52
undefined
C
51
undefined
C
39
undefined
C
47
undefined
C
45

 


* Wavefrontier T90 with 28E/23E/19E/13E/9E/4.8E/0.8W/5W via SCR switches 2 x 2 x 6 user bands
* Ziggo digital cable TV (FTA)
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.

Re: DM8000 : enigma2 start opnieuw op bij aanvang 2e of 3e opname. #90 CodeW

  • Senior Member
  • 87 posts

0
Neutral

Posted 21 July 2013 - 16:22

Voor 10 euro heb je al een 3draads fan, in de buurt van de cpu laten koelen.
Vooral met dit weer heb je anders continue dat jou box hem gaat hangen

Ik zou er dan meteen een koelplaatje op zetten. Heb ik ook ooit gedaan toen hij continu vastliep. Als je toevallig koelpasta in huis hebt (en een koelplaatje) is dat ideaal.

 

Bleek toen overigens een driver bug te zijn :lol: Sindsdien is die er weer uit.

 

Wat is bij jou de temperatuur nu?

root@dm8000:~# cat /proc/stb/sensors/*/*
undefined
C
45
undefined
C
43
undefined
C
51
undefined
C
52
undefined
C
51
undefined
C
39
undefined
C
47
undefined
C
45

 

dm8000 login: root

dreambox

root@dm8000:~# dreambox

-sh: dreambox: not found

root@dm8000:~# [6ncat /proc/buddyinfo

Node 0, zone Normal 35 14 2 80 81 6 2 0 1 3 3

root@dm8000:~# [6ncat /proc/buddyinfo

Node 0, zone Normal 35 13 2 80 81 6 2 0 1 3 3

root@dm8000:~# [6ncat /proc/buddyinfo

Node 0, zone Normal 5 13 2 80 81 6 2 0 1 3 3

root@dm8000:~# [6ncat /proc/buddyinfo

Node 0, zone Normal 5 13 2 80 81 6 2 0 1 3 3

root@dm8000:~# [6ncat /proc/buddyinfo

Node 0, zone Normal 2 8 2 80 81 6 2 0 1 3 3

root@dm8000:~# [6ncat /proc/stb/sensors/*/*

undefined

C

36

undefined

C

39

undefined

C

43

undefined

C

45

undefined

C

35

undefined

C

33

undefined

C

43

undefined

C

41

root@dm8000:~# [6n

 

Ik moest weer resetten. Nu heb ik een ventilator bij de dm8000 gezet. Ik heb geen spullen zo gauw in huis.



Re: DM8000 : enigma2 start opnieuw op bij aanvang 2e of 3e opname. #91 CodeW

  • Senior Member
  • 87 posts

0
Neutral

Posted 21 July 2013 - 18:30

De ventilator staat nu ongeveer 2 uur tegen de dm8000 aan te blazen. Ik heb nu wat meetgegevens verzameld.

 

 

openpli 3.0 dm8000

 

 

 

dm8000 login: root@dm8000:~# dreambox

-sh: dreambox: not found

 

 

root@dm8000:~# [6ndmesg -c

>end_request: I/O error, dev mtdblock1, sector 8

uncorrectable error :

uncorrectable error :

end_request: I/O error, dev mtdblock1, sector 16

uncorrectable error :

uncorrectable error :

end_request: I/O error, dev mtdblock1, sector 24

uncorrectable error :

uncorrectable error :

end_request: I/O error, dev mtdblock1, sector 0

uncorrectable error :

uncorrectable error :

end_request: I/O error, dev mtdblock0, sector 0

uncorrectable error :

uncorrectable error :

end_request: I/O error, dev mtdblock0, sector 8

uncorrectable error :

uncorrectable error :

end_request: I/O error, dev mtdblock0, sector 16

uncorrectable error :

uncorrectable error :

end_request: I/O error, dev mtdblock0, sector 24

uncorrectable error :

uncorrectable error :

end_request: I/O error, dev mtdblock0, sector 0

stb_core: module license 'Proprietary' taints kernel.

Disabling lock debugging due to kernel taint

fpga init

done OK 0

enter base init, xvd 20100413, vdc 20100413, rap 20101005, xpt 20110228

!!! kernMemSize: 154 MB

smca set muxes

smcb set muxes

smcc set muxes

10:551002727 SMCA: controller reset timed out

10:561010236 SMCB: controller reset timed out

register adapter

register adapter

register adapter

register adapter

register adapter

FP Version 7

input: dreambox front panel as /devices/virtual/input/input0

maskffffffff

using fpga version 2a

tsmux set tsports reg 02 to val dc

tsmux set tsports reg 02 to val dc

tsmux set tsports reg 03 to val fe

tsmux set tsports reg 03 to val fe

tsmux set ciclk reg fe to val 00

tsmux set cisource reg 00 to val 55

tsmux set ciclk reg fe to val 00

tsmux set cisource reg 00 to val 55

tsmux set ciclk reg fe to val 00

tsmux set cisource reg 01 to val 55

tsmux set ciclk reg fe to val 00

tsmux set cisource reg 01 to val 55

set sb to 3(2)

set fb to 2(-1)

set input to 0

set fb to 2(-1)

bcm_video_analog_port_setup (fmt=7)

SET FORMAT: display[1], format=7

display 0 uses vbi path 1

display 1 uses vbi path 0

HDMI: now powered down

Write AVS: 40 40 00 00 00 00 00 03 00 02 00 00 00 ff

Write AVS: 40 40 00 00 00 00 18 63 00 02 00 00 00 ff

set sb to 3(2)

set sb to 3(2)

HDMI: EDID read ok

HDMI: initial mode set!

using 50.00Hz as MonitorRefreshRate

SET FORMAT: display[0], format=37

HDMI mode

use EDID to detect colorspace

using colorspace: 1

set fb to 2(0)

bcm_video_analog_port_setup (fmt=7)

SET FORMAT: display[1], format=7

disable wss on display 0

disable wss on display 1

bcmfb: creating surface with pixel format 0x07e48888 (BPXL_eA8_R8_G8_B8)

enable mad

VIDEO0: set fallback framerate to 60000

VIDEO0: set progressive override mode to 1

VIDEO0: set streamtype!

set MPEG2

sw rave disabled!

enable mad

VIDEO1: set fallback framerate to 60000

VIDEO1: set progressive override mode to 1

VIDEO1: set streamtype!

set MPEG2

sw rave disabled!

sync is off so we enable it

playback!

total video delay: 0 (0 ms)

VIDEO0: start decode

flush video decoder

bcm_mpeg_decoder_get_pts: 122 callbacks suppressed

VIDEO0 got pts failed !!!! (ret 0)

set ac3 to downmix

set aac to downmix

init ALSA!

VIDEO0: first pts 0x0

DVB: registering new adapter (BCM7400)

autodetecting NIMs...

ret: -145, feid: 00

enable tsm0

ret: 2, feid: 01

Found: Slot D, ID: 01 (by CA)

Initializing adapter 0 (BCM4501 (internal)-DVB-S2)

bcm4501: found 4501, revision 2(c0)

bcm4501: bcm_initAP

bcm4501: upload & start firmware

bcm4501: ap not running - start now

bcm4501: uCode 0x72

DVB: registering adapter 0 frontend 0 (bcm4501)...

Initializing adapter 1 (BCM4501 (internal)-DVB-S2)

DVB: registering adapter 0 frontend 1 (bcm4501)...

Initializing adapter 3 (Philips CU1216Mk3-DVB-C)

DVB: registering adapter 0 frontend 2 (CU1216Mk3)...

VIDEO0: stop decode

no decoder left in sync handling so disable xpt_sync

CI stopped...

CI stopped...

CI stopped...

CI stopped...

registered vtuner misc/vtuner0, minor 52

registered vtuner misc/vtuner1, minor 51

IR-TX init!

input: dreambox remote control (native) as /devices/virtual/input/input1

input: dreambox advanced remote control (native) as /devices/virtual/input/input2

input: dreambox ir keyboard as /devices/virtual/input/input3

input: dreambox ir mouse as /devices/virtual/input/input4

NET: Registered protocol family 10

ath_hal: 2009-05-08 (AR5210, AR5211, AR5212, AR5416, RF5111, RF5112, RF2413, RF5413, RF2133, RF2425, REGOPS_FUNC, XR)

wlan: svn r3314

ath_pci: svn r3314

4017366 ms:

Adding 65532k swap on /media/hdd/swapfile. Priority:-1 extents:2 across:90108k

140 ms: 06

26 ms: 10

using 50.00Hz as MonitorRefreshRate

SET FORMAT: display[0], format=27

HDMI mode

use EDID to detect colorspace

using colorspace: 1

bcm_video_analog_port_setup (fmt=7)

SET FORMAT: display[1], format=7

set current avs auto aspect to 16:9

disable wss on display 0

disable wss on display 1

set sb to 3(1)

Write AVS: 40 40 00 00 00 00 18 61 00 02 00 00 00 ff

VIDEO0: set blank to 0

650 ms: 20

sync is off so we enable it

playback!

total video delay: 0 (0 ms)

VIDEO0: start decode

flush video decoder

VIDEO0: first pts 0x0

VIDEO0: framerate changed 3

VIDEO0: resolution changed (1280 720)

VIDEO0: aspect changed 3

set current avs auto aspect to 16:9

disable wss on display 0

disable wss on display 1

set current avs auto aspect to 16:9

disable wss on display 0

disable wss on display 1

set sb to 3(1)

enable tsm0

VIDEO0: set blank to 0

VIDEO0: stop decode

VIDEO0: set blank to 0

no decoder left in sync handling so disable xpt_sync

ADDRCONF(NETDEV_UP): wlan0: link is not ready

2755 ms: 30

95 ms: 40

wlan0: authenticate with f8:d1:11:88:4b:08 (try 1)

wlan0: authenticated

wlan0: associate with f8:d1:11:88:4b:08 (try 1)

wlan0: RX AssocResp from f8:d1:11:88:4b:08 (capab=0x431 status=0 aid=3)

wlan0: associated

ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready

VIDEO0: set blank to 0

sync is off so we enable it

playback!

total video delay: 0 (0 ms)

VIDEO0: start decode

flush video decoder

VIDEO0: first pts 0x0

enable tsm0

VIDEO0: set blank to 0

VIDEO0: stop decode

VIDEO0: set blank to 0

no decoder left in sync handling so disable xpt_sync

bcm_accel: invalid opcode! 00000080

bcmfb: enable manual blit

bcmfb: creating surface with pixel format 0x07e48888 (BPXL_eA8_R8_G8_B8)

tsmux set cisource reg 00 to val 54

tsmux set cisource reg 00 to val 44

tsmux set cisource reg 01 to val 54

tsmux set cisource reg 01 to val 44

tsmux set tsports reg 02 to val dc

tsmux set tsports reg 02 to val dc

tsmux set tsports reg 03 to val fe

tsmux set tsports reg 03 to val fe

bcm4501: channel 0 is in normale mode now

bcm4501: channel 0 is sleeping now

bcm4501: channel 1 is in normale mode now

bcm4501: channel 1 is sleeping now

tda: init complete

set current avs auto aspect to 16:9

disable wss on display 0

disable wss on display 1

set sb to 3(1)

set current avs auto aspect to 16:9

disable wss on display 0

disable wss on display 1

set sb to 3(1)

VIDEO0: dst_left, dst_top, dst_width and dst_height is 0.. reset to defaults!

set current avs auto aspect to 16:9

disable wss on display 0

disable wss on display 1

set sb to 3(1)

set current avs auto aspect to 16:9

disable wss on display 0

disable wss on display 1

set sb to 3(1)

VIDEO1: dst_left, dst_top, dst_width and dst_height is 0.. reset to defaults!

6406 ms: 50

5 ms: 50

56 ms: 50

29 ms: 50

167 ms: 50

656 ms: 50

484 ms: 52

11 ms: 53

3 ms: 53

2 ms: 53

eth0: no IPv6 routers present

wlan0: no IPv6 routers present

3731 ms: 53

7 ms: 65

94 ms: 65

87 ms: 65

2 ms: 65

14 ms: 65

2 ms: 65

2 ms: 65

16 ms: 65

22 ms: 65

165 ms: 65

8 ms: 66

17 ms: 66

26 ms: 66

11 ms: 66

19 ms: 66

2 ms: 66

3 ms: 66

10 ms: 66

980 ms: 66

10 ms: 69

66 ms: 69

2 ms: 69

48 ms: 69

3 ms: 69

2 ms: 69

5 ms: 69

15 ms: 69

15 ms: 69

3 ms: 69

bcmfb: creating surface with pixel format 0x07e48888 (BPXL_eA8_R8_G8_B8)

388 ms: 69

145 ms: 70

824 ms: 71

Write AVS: 40 40set current avs auto aspect to 16:9

disable wss on display 0

disable wss on display 1

00set current avs auto aspect to 16:9

disable wss on display 0

disable wss on display 1

00 00 00 00 61disable wss on display 0

set wss 7 on display 1

00 02 00 00 00 ff

set sb to 3(1)

set sb to 3(1)

set input to 0

set fb to 2(0)

set current avs auto aspect to 16:9

disable wss on display 0

set wss 7 on display 1

set sb to 3(1)

set ac3 to passthrough

85 ms: 73

22 ms: 73

188 ms: 73

275 ms: 74

30 ms: 74

57 ms: 74

39 ms: 75

tsmux set ciclk reg fe to val 10

tsmux set ciclk reg fe to val 30

tsmux set ciclk reg fe to val 70

tsmux set ciclk reg fe to val f0

48 ms: 75

3 ms: 75

8 ms: 75

40 ms: 75

121 ms: 75

32 ms: 75

12 ms: 75

54 ms: 75

557 ms: 75

80 ms: 76

648 ms: 77

39 ms: 78

23 ms: 79

272 ms: 79

113 ms: 79

81 ms: 80

150 ms: 80

1818 ms: 80

294 ms: 85

5 ms: 86

8 ms: 86

52 ms: 86

174 ms: 86

13 ms: 87

22 ms: 87

24 ms: 87

356 ms: 87

14 ms: 88

21 ms: 88

3 ms: 88

77 ms: 88

84 ms: 88

21 ms: 88

31 ms: 88

66 ms: 88

22 ms: 89

21 ms: 89

229 ms: 89

57 ms: 89

10 ms: 89

3 ms: 89

119 ms: 89

397 ms: 90

16 ms: 91

set current avs auto aspect to 16:9

disable wss on display 0

set wss 7 on display 1

set sb to 3(1)

set current avs auto aspect to 16:9

disable wss on display 0

set wss 7 on display 1

set sb to 3(1)

disable wss on display 0

set wss 7 on display 1

set current avs auto aspect to 16:9

disable wss on display 0

set wss 7 on display 1

set sb to 3(1)

set current avs auto aspect to 16:9

disable wss on display 0

set wss 7 on display 1

set sb to 3(1)

set current avs auto aspect to 16:9

disable wss on display 0

set wss 7 on display 1

set sb to 3(1)

disable wss on display 0

set wss 7 on display 1

set current avs auto aspect to 16:9

disable wss on display 0

set wss 7 on display 1

set sb to 3(1)

set current avs auto aspect to 16:9

disable wss on display 0

set wss 7 on display 1

set sb to 3(1)

set current avs auto aspect to 16:9

disable wss on display 0

set wss 7 on display 1

set sb to 3(1)

disable wss on display 0

set wss 7 on display 1

set current avs auto aspect to 16:9

disable wss on display 0

set wss 7 on display 1

set sb to 3(1)

set current avs auto aspect to 16:9

disable wss on display 0

set wss 7 on display 1

set sb to 3(1)

set current avs auto aspect to 16:9

disable wss on display 0

set wss 7 on display 1

set sb to 3(1)

disable wss on display 0

set wss 7 on display 1

set current avs auto aspect to 16:9

disable wss on display 0

set wss 7 on display 1

set sb to 3(1)

set current avs auto aspect to 16:9

disable wss on display 0

set wss 7 on display 1

set sb to 3(1)

set current avs auto aspect to 16:9

disable wss on display 0

set wss 7 on display 1

set sb to 3(1)

set current avs auto aspect to 16:9

disable wss on display 0

set wss 7 on display 1

set sb to 3(1)

set current avs auto aspect to 16:9

disable wss on display 0

set wss 7 on display 1

set sb to 3(1)

disable wss on display 0

set wss 7 on display 1

set current avs auto aspect to 16:9

disable wss on display 0

set wss 7 on display 1

set sb to 3(1)

130 ms: 91

94 ms: 91

306 ms: 92

904 ms: 92

1872 ms: 95

set mute 0 (000) 1

57 ms: 99

11 ms: 99

4 ms: 99

bcm4501: channel 0 is in normale mode now

start pcr0 on dmx 0 pid:e5 index 1

start audio on dmx 0 pid:e5

audio xpt start

sync is off so we enable it

demux-index 0 pcr0pid e5

using 1 as pcr0 pidchannel

MPEG

audio: streamtype set 0

audio: streamtype_set: stop rave

audio: streamtype_set: restart rave

set mute 0 (111) 1

audio: decoder start 2

video delay 0 (0 ms)

total video delay: 0 (0 ms)

VIDEO0: set blank to 0

total video delay: 0 (0 ms)

VIDEO0: start decode

flush video decoder

ch0: lock

VIDEO0: first pts 0x0

RAP first pts 0xccc91fc6, stc 0xccc912ba, pcr valid

VIDEO0: set blank to 0

bcm_mpeg: clip already enabled

flush video decoder

enable tsm0

RAP sampling rate info isr (48000)

eBitRateChange Isr.. set source_changed_event!

eModeChange Isr.. set source_changed_event!

VIDEO0: first pts 0x0

VIDEO0: set blank to 0

VIDEO0: stop decode

VIDEO0: set blank to 0

enable tsm0

stop pcr0 on dmx 0 pid:e5

audio: decoder stop

stop audio on dmx 0 pid:e5

audio: xpt stop(1)

no decoder left in sync handling so disable xpt_sync

bcm_audio_channel_stop(1) done

bcm4501: rolloff 0.25 is not supported!!!!!

start pcr0 on dmx 0 pid:205 index 1

start audio on dmx 0 pid:5c

audio xpt start

sync is off so we enable it

demux-index 0 pcr0pid 205

using 1 as pcr0 pidchannel

AC3

audio: streamtype set 1

audio: streamtype_set: stop rave

passthru

audio: streamtype_set: restart rave

set mute 0 (001) 0

audio: decoder start 0

video delay 0 (0 ms)

total video delay: 0 (0 ms)

VIDEO0: set streamtype!

set H264

sw rave disabled!

audio delay 18000 (200 ms)

total video delay: 18000 (200 ms)

start video0 on dmx 0 pid:205

total video delay: 18000 (200 ms)

VIDEO0: start decode

ch0: lock

RAP first pts 0x138d2f934, stc 0xc249054e, pcr valid

ch0: lock

ch0: lock

ch0: lock

ch0: lock

HDMI: now connected

HDMI: EDID read ok

using 50.00Hz as MonitorRefreshRate

SET FORMAT: display[0], format=27

HDMI mode

use EDID to detect colorspace

using colorspace: 1

bcm_video_analog_port_setup (fmt=7)

RAP sampling rate info isr (48000)

SET FORMAT: display[1], format=7

set current avs auto aspect to 16:9

disable wss on display 0

set wss 7 on display 1

set sb to 3(1)

VIDEO0: first pts 0xc24bf6de

VIDEO0: resolution changed (1920 1080)

enable tsm0

VIDEO0: progressive changed (0)

HDMI: force disconnect!

HDMI: now disconnected

HDMI: now connected

HDMI: EDID read ok

using 50.00Hz as MonitorRefreshRate

SET FORMAT: display[0], format=27

HDMI mode

use EDID to detect colorspace

using colorspace: 1

bcm_video_analog_port_setup (fmt=7)

SET FORMAT: display[1], format=7

set current avs auto aspect to 16:9

disable wss on display 0

set wss 7 on display 1

set sb to 3(1)

stop pcr0 on dmx 0 pid:205

stop video0 on dmx 0 pid:205

VIDEO0: stop decode

VIDEO0: set blank to 1

audio: decoder stop

stop audio on dmx 0 pid:5c

audio: xpt stop(2)

no decoder left in sync handling so disable xpt_sync

bcm_audio_channel_stop(2) done

tda: init complete

VIDEO0: dst_left, dst_top, dst_width and dst_height is 0.. reset to defaults!

tda: afc=0 (0 Hz)

set current avs auto aspect to 16:9

disable wss on display 0

set wss 7 on display 1

set sb to 3(1)

start pcr0 on dmx 0 pid:65 index 1

start audio on dmx 0 pid:23

audio xpt start

sync is off so we enable it

demux-index 0 pcr0pid 65

using 1 as pcr0 pidchannel

AC3

audio: decoder start 0

audio delay 18000 (200 ms)

total video delay: 18000 (200 ms)

start video0 on dmx 0 pid:65

total video delay: 18000 (200 ms)

VIDEO0: start decode

ch0: lock

RAP first pts 0x2cdc7d2a, stc 0xa0e93cd8, pcr valid

RAP pts error 0 PTS 0x166e3e95, STC 0x50749e6e, type 0

ch0: lock

RAP pts error 0 PTS 0x166e3e95, STC 0x5074a3f9, type 1

ch0: lock

RAP sampling rate info isr (48000)

bcm4501: channel 0 is sleeping now

VIDEO0: first pts 0xa0ecc00e

enable tsm0

root@dm8000:~# [6n

 

 

root@dm8000:~# [6ncat /proc/buddyinfo

Node 0, zone Normal 466 33 0 0 0 0 0 0 0 0 0

root@dm8000:~# [6n

 

 

root@dm8000:~# [6ncat /proc/stb/sensors/*/*

undefined

C

34

undefined

C

36

undefined

C

39

undefined

C

44

undefined

C

33

undefined

C

30

undefined

C

39

undefined

C

38

root@dm8000:~# [6n

 

Ik ben nieuwsgierig of jullie al verbeteringen vinden in de situatie. Vast bedankt!!!



Re: DM8000 : enigma2 start opnieuw op bij aanvang 2e of 3e opname. #92 Erik Slagter

  • PLi® Core member
  • 46,017 posts

+513
Excellent

Posted 21 July 2013 - 18:35

Jouw temperatuur is lager dan die van mij.

 

Ik zie wel flash read errors. Wanneer heb je voor het laatst geflasht? Heb je wel eens de flash-reparatie-tool van DMM gebruikt?


* Wavefrontier T90 with 28E/23E/19E/13E/9E/4.8E/0.8W/5W via SCR switches 2 x 2 x 6 user bands
* Ziggo digital cable TV (FTA)
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.

Re: DM8000 : enigma2 start opnieuw op bij aanvang 2e of 3e opname. #93 CodeW

  • Senior Member
  • 87 posts

0
Neutral

Posted 21 July 2013 - 19:21

Jouw temperatuur is lager dan die van mij.

 

Ik zie wel flash read errors. Wanneer heb je voor het laatst geflasht? Heb je wel eens de flash-reparatie-tool van DMM gebruikt?

De laatste flash deed ik 14 juli na de herformattering van de hdd.

De tool die je noemt ken ik niet. Wel heb ik enkele weken geleden met Dreamup de bootloader 84 er opnieuw op gezet. Maar je bedoelt misschien iets anders.



Re: DM8000 : enigma2 start opnieuw op bij aanvang 2e of 3e opname. #94 Erik Slagter

  • PLi® Core member
  • 46,017 posts

+513
Excellent

Posted 22 July 2013 - 08:55

Ik dacht dat het een aparte tool was, maar misschien zit het ook wel in DreamUp, probeer die eens? Je moet er wel rekening mee houden dat je daarna zowiezo opnieuw moet flashen.

Edited by Erik Slagter, 22 July 2013 - 08:55.

* Wavefrontier T90 with 28E/23E/19E/13E/9E/4.8E/0.8W/5W via SCR switches 2 x 2 x 6 user bands
* Ziggo digital cable TV (FTA)
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.

Re: DM8000 : enigma2 start opnieuw op bij aanvang 2e of 3e opname. #95 teo1966

  • Senior Member
  • 868 posts

+8
Neutral

Posted 22 July 2013 - 09:09

Ik dacht dat het een aparte tool was, maar misschien zit het ook wel in DreamUp, probeer die eens? Je moet er wel rekening mee houden dat je daarna zowiezo opnieuw moet flashenin dreamup onder extra

 

Ik dacht dat het een aparte tool was, maar misschien zit het ook wel in DreamUp, probeer die eens? Je moet er wel rekening mee houden dat je daarna zowiezo opnieuw moet flashen.

 

met dreamup onder extra recovery bad sectors aanvinken ( deze optie zit bij de laatste dreamups )


Edited by teo1966, 22 July 2013 - 09:10.

VU+ULTIMO4K/HD11/HD530C/HD51 openpli 7.3 / 7.2


Re: DM8000 : enigma2 start opnieuw op bij aanvang 2e of 3e opname. #96 CodeW

  • Senior Member
  • 87 posts

0
Neutral

Posted 22 July 2013 - 10:15

De ventilator draait.

Bootloader 84 opnieuw geflashed.

Image van vandaag geflashed.

Swapfile is actief

Onderstaande gegevens opgehaald.

Het lijkt mij dat er geen onbehoorlijke dingen meer in staan.

Wat vinden jullie ervan?

 

 

openpli 3.0 dm8000

 

 

 

root@dm8000:~# dreambox
-sh: dreambox: not found
root@dm8000:~# [6ndmesg -c
to 3(1)
139 ms: 90
96 ms: 91
45 ms: 91
82 ms: 92
1989 ms: 94
set mute 0 (111) 0
61 ms: 99
20 ms: 99
4 ms: 99
bcm4501: channel 0 is in normale mode now
start pcr0 on dmx 0 pid:e5 index 1
start audio on dmx 0 pid:e5
audio xpt start
sync is off so we enable it
demux-index 0 pcr0pid e5
using 1 as pcr0 pidchannel
MPEG
audio: decoder start 0
video delay 0 (0 ms)
total video delay: 0 (0 ms)
VIDEO0: set blank to 0
total video delay: 0 (0 ms)
VIDEO0: start decode
flush video decoder
ch0: lock
RAP first pts 0x63e721e2, stc 0x63e71802, pcr valid
VIDEO0: first pts 0x0
VIDEO0: set blank to 0
VIDEO0: stop decode
VIDEO0: set blank to 0
RAP sampling rate info isr (48000)
eBitRateChange Isr.. set source_changed_event!
eModeChange Isr.. set source_changed_event!
enable tsm0
VIDEO0: set blank to 0
total video delay: 0 (0 ms)
VIDEO0: start decode
flush video decoder
VIDEO0: first pts 0x0
VIDEO0: set blank to 0
VIDEO0: stop decode
VIDEO0: set blank to 0
enable tsm0
VIDEO0: dst_left, dst_top, dst_width and dst_height is 0.. reset to defaults!
set current avs auto aspect to 16:9
disable wss on display 0
set wss 7 on display 1
set sb to 3(1)
VIDEO0: dst_left, dst_top, dst_width and dst_height is 0.. reset to defaults!
set current avs auto aspect to 16:9
disable wss on display 0
set wss 7 on display 1
set sb to 3(1)
VIDEO0: dst_left, dst_top, dst_width and dst_height is 0.. reset to defaults!
set current avs auto aspect to 16:9
disable wss on display 0
set wss 7 on display 1
set sb to 3(1)
VIDEO0: dst_left, dst_top, dst_width and dst_height is 0.. reset to defaults!
set current avs auto aspect to 16:9
disable wss on display 0
set wss 7 on display 1
set sb to 3(1)
stop pcr0 on dmx 0 pid:e5
audio: decoder stop
stop audio on dmx 0 pid:e5
audio: xpt stop(1)
no decoder left in sync handling so disable xpt_sync
bcm_audio_channel_stop(1) done
VIDEO0: dst_left, dst_top, dst_width and dst_height is 0.. reset to defaults!
set current avs auto aspect to 16:9
disable wss on display 0
set wss 7 on display 1
set sb to 3(1)
VIDEO1: dst_left, dst_top, dst_width and dst_height is 0.. reset to defaults!
bcm4501: channel 0 is sleeping now
bcmfb: disable manual blit
VIDEO0: set blank to 0
sync is off so we enable it
playback!
total video delay: 0 (0 ms)
VIDEO0: start decode
flush video decoder
VIDEO0: first pts 0x0
enable tsm0
VIDEO0: set blank to 0
VIDEO0: stop decode
VIDEO0: set blank to 0
no decoder left in sync handling so disable xpt_sync
bcm_accel: invalid opcode! 00000080
bcmfb: enable manual blit
tsmux set cisource reg 00 to val 44
tsmux set cisource reg 00 to val 44
tsmux set cisource reg 01 to val 34
tsmux set cisource reg 01 to val 44
tsmux set tsports reg 02 to val dc
tsmux set tsports reg 02 to val dc
tsmux set tsports reg 03 to val fe
tsmux set tsports reg 03 to val fe
bcm4501: channel 0 is in normale mode now
bcm4501: channel 1 is in normale mode now
bcm4501: channel 0 is sleeping now
bcm4501: channel 1 is sleeping now
tda: init complete
VIDEO0: dst_left, dst_top, dst_width and dst_height is 0.. reset to defaults!
set current avs auto aspect to 16:9
disable wss on display 0
set wss 7 on display 1
set sb to 3(1)
VIDEO1: dst_left, dst_top, dst_width and dst_height is 0.. reset to defaults!
682799 ms: 100
15 ms: 50
28 ms: 50
14 ms: 50
125 ms: 50
511 ms: 50
389 ms: 52
15 ms: 54
1 ms: 54
2 ms: 54
3112 ms: 54
8 ms: 66
52 ms: 66
64 ms: 66
2 ms: 66
12 ms: 66
2 ms: 66
2 ms: 66
11 ms: 66
16 ms: 66
140 ms: 66
2 ms: 67
16 ms: 67
19 ms: 67
11 ms: 67
14 ms: 67
2 ms: 67
5 ms: 67
11 ms: 67
842 ms: 67
9 ms: 70
50 ms: 70
2 ms: 70
39 ms: 71
4 ms: 71
3 ms: 71
4 ms: 71
10 ms: 71
10 ms: 71
3 ms: 71
123 ms: 71
138 ms: 71
823 ms: 72
set current avs auto aspect to 16:9
disable wss on display 0
set wss 7 on display 1
set sb to 3(1)
set current avs auto aspect to 16:9
disable wss on display 0
set wss 7 on display 1
set sb to 3(1)
disable wss on display 0
set wss 7 on display 1
set input to 0
set fb to 2(0)
set current avs auto aspect to 16:9
disable wss on display 0
set wss 7 on display 1
set sb to 3(1)
set ac3 to passthrough
83 ms: 75
22 ms: 75
138 ms: 75
224 ms: 76
30 ms: 77
63 ms: 77
20 ms: 77
tsmux set ciclk reg fe to val f0
tsmux set ciclk reg fe to val f0
tsmux set ciclk reg fe to val f0
tsmux set ciclk reg fe to val f0
25 ms: 77
3 ms: 77
5 ms: 77
17 ms: 77
62 ms: 77
27 ms: 77
67 ms: 78
336 ms: 78
113 ms: 79
211 ms: 79
1955 ms: 79
370 ms: 87
7 ms: 87
355 ms: 87
17 ms: 87
12 ms: 87
129 ms: 87
14 ms: 88
29 ms: 88
65 ms: 88
57 ms: 88
16 ms: 88
271 ms: 88
42 ms: 89
8 ms: 89
69 ms: 89
134 ms: 90
6 ms: 90
set current avs auto aspect to 16:9
disable wss on display 0
set wss 7 on display 1
set sb to 3(1)
set current avs auto aspect to 16:9
disable wss on display 0
set wss 7 on display 1
set sb to 3(1)
disable wss on display 0
set wss 7 on display 1
set current avs auto aspect to 16:9
disable wss on display 0
set wss 7 on display 1
set sb to 3(1)
set current avs auto aspect to 16:9
disable wss on display 0
set wss 7 on display 1
set sb to 3(1)
set current avs auto aspect to 16:9
disable wss on display 0
set wss 7 on display 1
set sb to 3(1)
disable wss on display 0
set wss 7 on display 1
set current avs auto aspect to 16:9
disable wss on display 0
set wss 7 on display 1
set sb to 3(1)
set current avs auto aspect to 16:9
disable wss on display 0
set wss 7 on display 1
set sb to 3(1)
set current avs auto aspect to 16:9
disable wss on display 0
set wss 7 on display 1
set sb to 3(1)
disable wss on display 0
set wss 7 on display 1
set current avs auto aspect to 16:9
disable wss on display 0
set wss 7 on display 1
set sb to 3(1)
set current avs auto aspect to 16:9
disable wss on display 0
set wss 7 on display 1
set sb to 3(1)
set current avs auto aspect to 16:9
disable wss on display 0
set wss 7 on display 1
set sb to 3(1)
disable wss on display 0
set wss 7 on display 1
set current avs auto aspect to 16:9
disable wss on display 0
set wss 7 on display 1
set sb to 3(1)
set current avs auto aspect to 16:9
disable wss on display 0
set wss 7 on display 1
set sb to 3(1)
set current avs auto aspect to 16:9
disable wss on display 0
set wss 7 on display 1
set sb to 3(1)
set current avs auto aspect to 16:9
disable wss on display 0
set wss 7 on display 1
set sb to 3(1)
set current avs auto aspect to 16:9
disable wss on display 0
set wss 7 on display 1
set sb to 3(1)
disable wss on display 0
set wss 7 on display 1
set current avs auto aspect to 16:9
disable wss on display 0
set wss 7 on display 1
set sb to 3(1)
116 ms: 90
94 ms: 91
144 ms: 91
8824 ms: 91
2478 ms: 92
set mute 0 (111) 0
54 ms: 99
11 ms: 99
2 ms: 99
bcm4501: channel 0 is in normale mode now
OUVF, rewrite.
start pcr0 on dmx 0 pid:e5 index 1
start audio on dmx 0 pid:e5
audio xpt start
sync is off so we enable it
demux-index 0 pcr0pid e5
using 1 as pcr0 pidchannel
MPEG
audio: decoder start 0
video delay 0 (0 ms)
total video delay: 0 (0 ms)
VIDEO0: set blank to 0
total video delay: 0 (0 ms)
VIDEO0: start decode
flush video decoder
VIDEO0: first pts 0x0
ch0: lock
VIDEO0: set blank to 0
VIDEO0: stop decode
VIDEO0: set blank to 0
RAP first pts 0x67ae8b62, stc 0x67ae8088, pcr valid
enable tsm0
VIDEO0: set blank to 0
total video delay: 0 (0 ms)
VIDEO0: start decode
flush video decoder
RAP sampling rate info isr (48000)
eBitRateChange Isr.. set source_changed_event!
eModeChange Isr.. set source_changed_event!
VIDEO0: first pts 0x0
VIDEO0: set blank to 0
VIDEO0: stop decode
VIDEO0: set blank to 0
enable tsm0
VIDEO0: dst_left, dst_top, dst_width and dst_height is 0.. reset to defaults!
set current avs auto aspect to 16:9
disable wss on display 0
set wss 7 on display 1
set sb to 3(1)
stop pcr0 on dmx 0 pid:e5
audio: decoder stop
stop audio on dmx 0 pid:e5
audio: xpt stop(1)
no decoder left in sync handling so disable xpt_sync
bcm_audio_channel_stop(1) done
tda: init complete
tda: afc=0 (0 Hz)
start pcr0 on dmx 0 pid:79 index 1
start audio on dmx 0 pid:7b
audio xpt start
sync is off so we enable it
demux-index 0 pcr0pid 79
using 1 as pcr0 pidchannel
AC3
audio: streamtype set 1
audio: streamtype_set: stop rave
passthru
audio: streamtype_set: restart rave
set mute 0 (001) 0
audio: decoder start 0
video delay 0 (0 ms)
total video delay: 0 (0 ms)
VIDEO0: set streamtype!
set H264
sw rave disabled!
audio delay 18000 (200 ms)
total video delay: 18000 (200 ms)
start video0 on dmx 0 pid:79
total video delay: 18000 (200 ms)
VIDEO0: start decode
bcm4501: channel 0 is sleeping now
VIDEO0: dst_left, dst_top, dst_width and dst_height is 0.. reset to defaults!
set current avs auto aspect to 16:9
disable wss on display 0
set wss 7 on display 1
set sb to 3(1)
stop pcr0 on dmx 0 pid:79
stop video0 on dmx 0 pid:79
VIDEO0: stop decode
VIDEO0: set blank to 1
bcm_audio: use saved pts 0x68a79522 (0x0) (ret 0)
audio: decoder stop
stop audio on dmx 0 pid:7b
audio: xpt stop(2)
no decoder left in sync handling so disable xpt_sync
bcm_audio_channel_stop(2) done
start pcr0 on dmx 0 pid:65 index 1
start audio on dmx 0 pid:67
audio xpt start
sync is off so we enable it
demux-index 0 pcr0pid 65
using 1 as pcr0 pidchannel
AC3
audio: decoder start 0
audio delay 18000 (200 ms)
total video delay: 18000 (200 ms)
start video0 on dmx 0 pid:65
total video delay: 18000 (200 ms)
VIDEO0: start decode
ch0: lock
RAP first pts 0xb0024a92, stc 0xb00241c6, pcr valid
ch0: lock
ch0: lock
ch0: lock
ch0: lock
VIDEO0: dst_left, dst_top, dst_width and dst_height is 0.. reset to defaults!
set current avs auto aspect to 16:9
disable wss on display 0
set wss 7 on display 1
set sb to 3(1)
RAP sampling rate info isr (48000)
VIDEO0: first pts 0xb004d744
VIDEO0: resolution changed (1920 1080)
enable tsm0
VIDEO0: progressive changed (0)
stop pcr0 on dmx 0 pid:65
stop video0 on dmx 0 pid:65
VIDEO0: stop decode
VIDEO0: set blank to 1
audio: decoder stop
stop audio on dmx 0 pid:67
audio: xpt stop(2)
no decoder left in sync handling so disable xpt_sync
bcm_audio_channel_stop(2) done
bcm4501: channel 0 is in normale mode now
VIDEO0: dst_left, dst_top, dst_width and dst_height is 0.. reset to defaults!
set current avs auto aspect to 16:9
disable wss on display 0
set wss 7 on display 1
set sb to 3(1)
bcm4501: rolloff 0.25 is not supported!!!!!
start pcr0 on dmx 0 pid:20d index 1
start audio on dmx 0 pid:69
audio xpt start
sync is off so we enable it
demux-index 0 pcr0pid 20d
using 1 as pcr0 pidchannel
AC3
audio: decoder start 0
audio delay 18000 (200 ms)
total video delay: 18000 (200 ms)
start video0 on dmx 0 pid:20d
total video delay: 18000 (200 ms)
VIDEO0: start decode
ch0: lock
RAP first pts 0x548ae7a4, stc 0x68162e6, pcr valid
RAP pts error 0 PTS 0x2a4573d2, STC 0x0340b175, type 0
ch0: lock
RAP sampling rate info isr (48000)
VIDEO0: first pts 0x6847390
enable tsm0
VIDEO0: dst_left, dst_top, dst_width and dst_height is 0.. reset to defaults!
set current avs auto aspect to 16:9
disable wss on display 0
set wss 7 on display 1
set sb to 3(1)
VIDEO0: dst_left, dst_top, dst_width and dst_height is 0.. reset to defaults!
set current avs auto aspect to 16:9
disable wss on display 0
set wss 7 on display 1
set sb to 3(1)
VIDEO0: dst_left, dst_top, dst_width and dst_height is 0.. reset to defaults!
set current avs auto aspect to 16:9
disable wss on display 0
set wss 7 on display 1
set sb to 3(1)
VIDEO0: dst_left, dst_top, dst_width and dst_height is 0.. reset to defaults!
set current avs auto aspect to 16:9
disable wss on display 0
set wss 7 on display 1
set sb to 3(1)
VIDEO0: dst_left, dst_top, dst_width and dst_height is 0.. reset to defaults!
set current avs auto aspect to 16:9
disable wss on display 0
set wss 7 on display 1
set sb to 3(1)
VIDEO0: dst_left, dst_top, dst_width and dst_height is 0.. reset to defaults!
set current avs auto aspect to 16:9
disable wss on display 0
set wss 7 on display 1
set sb to 3(1)
VIDEO0: dst_left, dst_top, dst_width and dst_height is 0.. reset to defaults!
set current avs auto aspect to 16:9
disable wss on display 0
set wss 7 on display 1
set sb to 3(1)
VIDEO0: dst_left, dst_top, dst_width and dst_height is 0.. reset to defaults!
set current avs auto aspect to 16:9
disable wss on display 0
set wss 7 on display 1
set sb to 3(1)
VIDEO0: dst_left, dst_top, dst_width and dst_height is 0.. reset to defaults!
set current avs auto aspect to 16:9
disable wss on display 0
set wss 7 on display 1
set sb to 3(1)
stop pcr0 on dmx 0 pid:20d
stop video0 on dmx 0 pid:20d
VIDEO0: stop decode
VIDEO0: set blank to 1
audio: decoder stop
stop audio on dmx 0 pid:69
audio: xpt stop(2)
no decoder left in sync handling so disable xpt_sync
bcm_audio_channel_stop(2) done
VIDEO0: dst_left, dst_top, dst_width and dst_height is 0.. reset to defaults!
set current avs auto aspect to 16:9
disable wss on display 0
set wss 7 on display 1
set sb to 3(1)
OUVF, rewrite.
start pcr0 on dmx 0 pid:e5 index 1
start audio on dmx 0 pid:e5
audio xpt start
sync is off so we enable it
demux-index 0 pcr0pid e5
using 1 as pcr0 pidchannel
MPEG
audio: streamtype set 0
audio: streamtype_set: stop rave
audio: streamtype_set: restart rave
set mute 0 (111) 0
audio: decoder start 0
audio delay 18000 (200 ms)
total video delay: 18000 (200 ms)
VIDEO0: set blank to 0
total video delay: 0 (0 ms)
VIDEO0: set streamtype!
stop rave
set MPEG2
sw rave disabled!
video delay 0 (0 ms)
total video delay: 0 (0 ms)
restart rave
VIDEO0: start decode
flush video decoder
VIDEO0 use saved pts 0xc4a5510 (ret 0)
ch0: lock
VIDEO0: first pts 0x0
VIDEO0: resolution changed (1280 720)
RAP first pts 0x6f5254a2, stc 0x6f524a06, pcr valid
VIDEO0: set blank to 0
bcm_mpeg: clip already enabled
flush video decoder
VIDEO0: first pts 0x0
RAP sampling rate info isr (48000)
eBitRateChange Isr.. set source_changed_event!
eModeChange Isr.. set source_changed_event!
VIDEO0: set blank to 0
VIDEO0: stop decode
VIDEO0: set blank to 0
enable tsm0
VIDEO0: progressive changed (1)
HDMI: now powered down
HDMI: now connected
HDMI: EDID read ok
using 50.00Hz as MonitorRefreshRate
SET FORMAT: display[0], format=27
HDMI mode
use EDID to detect colorspace
using colorspace: 1
bcm_video_analog_port_setup (fmt=7)
SET FORMAT: display[1], format=7
set current avs auto aspect to 16:9
disable wss on display 0
set wss 7 on display 1
set sb to 3(1)
HDMI: force disconnect!
HDMI: now disconnected
HDMI: now connected
HDMI: EDID read ok
using 50.00Hz as MonitorRefreshRate
SET FORMAT: display[0], format=27
HDMI mode
use EDID to detect colorspace
using colorspace: 1
bcm_video_analog_port_setup (fmt=7)
SET FORMAT: display[1], format=7
set current avs auto aspect to 16:9
disable wss on display 0
set wss 7 on display 1
set sb to 3(1)
HDMI: now powered down
root@dm8000:~# [6n
 
 
 
 
root@dm8000:~# [6ncat /proc/buddyinfo
Node 0, zone Normal 29 78 51 49 37 52 19 7 2 1 0
 
 
root@dm8000:~# [6ncat /proc/stb/sensors/*/*
undefined
C
34
undefined
C
35
undefined
C
38
undefined
C
43
undefined
C
32
undefined
C
29
undefined
C
37
undefined
C
37
root@dm8000:~# [6n


Re: DM8000 : enigma2 start opnieuw op bij aanvang 2e of 3e opname. #97 Erik Slagter

  • PLi® Core member
  • 46,017 posts

+513
Excellent

Posted 22 July 2013 - 10:17

Had je ook de "recovery bad sectors" gedaan in DreamUp? (hoewel pieterg nu waarschijnlijk gaat zeggen dat dat daar helemaal niet voor is  ;))


* Wavefrontier T90 with 28E/23E/19E/13E/9E/4.8E/0.8W/5W via SCR switches 2 x 2 x 6 user bands
* Ziggo digital cable TV (FTA)
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.

Re: DM8000 : enigma2 start opnieuw op bij aanvang 2e of 3e opname. #98 pieterg

  • PLi® Core member
  • 32,766 posts

+245
Excellent

Posted 22 July 2013 - 10:35

wat die optie doet, is domweg de bad sector markeringen wissen.

Oftewel, daarna krijg je juist veel meer leesfouten, omdat elke slechte sector opnieuw tijdens gebruik als zodanig herkend en bad gemarkeerd moet worden.

Er is maar 1 reden waarom die optie in dreamup zit, en dat is omdat het in het verleden nog wel eens gebeurde dat door een bug in de bootloader en/of de flash drivers de gehele flash als 'bad' gemarkeerd werd.
Dat kon dan 'hersteld' worden door alle bad markeringen te wissen.

Kortom, niet gebruiken die optie (volgens flash fabrikanten is het zelfs gevaarlijk om bad sectors te blijven wissen).

Re: DM8000 : enigma2 start opnieuw op bij aanvang 2e of 3e opname. #99 Erik Slagter

  • PLi® Core member
  • 46,017 posts

+513
Excellent

Posted 22 July 2013 - 10:37

Ja ik kreeg inderdaad opeens zo'n flashback met dat dat iets anders doet dan ik dacht ;)

 

Maar dan zou puur opnieuw flashen het meeste kans van slagen hebben, niet?


* Wavefrontier T90 with 28E/23E/19E/13E/9E/4.8E/0.8W/5W via SCR switches 2 x 2 x 6 user bands
* Ziggo digital cable TV (FTA)
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.

Re: DM8000 : enigma2 start opnieuw op bij aanvang 2e of 3e opname. #100 CodeW

  • Senior Member
  • 87 posts

0
Neutral

Posted 22 July 2013 - 10:38

Had je ook de "recovery bad sectors" gedaan in DreamUp? (hoewel pieterg nu waarschijnlijk gaat zeggen dat dat daar helemaal niet voor is  ;))

Toen ik de tip van teo1966 las had ik net alles weer draaiend.

Mochten jullie nog slechte toestanden vinden dan is dat nog een mogelijkheid die ik zeker zal gebruiken.

Ik heb de nieuwste Dreamup op mijn pc en ik heb de instelling voor flash-reparatie ook gevonden.

 

Sinds de actie van vanochtend heeft de dm8000 probleemloos gedraaid en ik hoop dat dat nu dagenlang zo gaat.







Also tagged with one or more of these keywords: DM8000, opname

0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users