2520 replies to this topic

[metoo]

+1

[Erik Slagter]

It is possible but it's quite a bit of work (including distribution).

Edited by Erik Slagter, 25 January 2015 - 09:33.

[littlesat]

But it would still be a beginning of having a stable and unstable branch with feeds...

[christophecvr]

gst-1 branch pushed.

 

Volunteers to test? My server is quite busy with some other tasks at the moment. I may try later.

 

I could test , but the images where I build for are now just those who needs other gst-dvb-mediasink then that used in openpli.

 

vuduo2 currently uses ffmpeg to have full codecs support (software codecs)

dm8000 also the dreambox mediasink and enigma2 needs patch to have full AC3+ support.

[mika-nl]

Maybe give here a small list of commands to build a gst1,x version ?

[theparasol]

Ok... building a xp1000 image again

 

Takes some time... hoping my new machine was some faster with i5 and ssd... it is faster but still slow

 

 

dont use root!

 

mkdir openpli4
cd openpli4
sudo apt install git
git clone git://git.code.sf.net/p/openpli/openpli-oe-core openpli-openpli-oe-core
cd openpli-openpli-oe-core/
git checkout gst-1
sudo apt install diffstat
sudo apt install chrpath
sudo apt install texinfo
MACHINE=xp1000 make image

[mika-nl]

Thx Building now atnd this night

git checkout gst-1 is the magic

Where can i find the image when it is done ?

[blzr]

and don't forget to set gst_version 1.0, and point to proper dvbmediasink plugin in your machine config (otherwise you still end up with gstreamer 0.10, despite building from gstreamer-1 branch)...

e.g:

diff --git a/conf/machine/include/et.inc b/conf/machine/include/et.inc
index b4d5c81..f563128 100644
--- a/conf/machine/include/et.inc
+++ b/conf/machine/include/et.inc
@@ -13,11 +13,12 @@ MACHINE_ESSENTIAL_EXTRA_RRECOMMENDS = "\
KERNEL_MODULE_AUTOLOAD += "xfs"

MACHINE_EXTRA_RRECOMMENDS = " \
- gst-plugin-dvbmediasink \
+ gstreamer1.0-plugin-dvbmediasink \
ntfs-3g \
"

DVBMEDIASINK_CONFIG = "--with-wma --with-wmv --with-pcm --with-dts --with-eac3"
+GST_VERSION = "1.0"

TARGET_ARCH = "mipsel"
DEFAULTTUNE ?= "mips32el"

Edited by blzr, 25 January 2015 - 20:47.

[theparasol]

tnx... didn't know that saved me some wasted cpu time

[theparasol]

for XP1000 that would be:

 

diff --git a/meta-xp/conf/machine/include/xp.inc b/meta-xp/conf/machine/include/xp.inc
index 377a3b7..6697a8b 100644
--- a/meta-xp/conf/machine/include/xp.inc
+++ b/meta-xp/conf/machine/include/xp.inc
@@ -13,13 +13,14 @@ MACHINE_ESSENTIAL_EXTRA_RRECOMMENDS = "\
 KERNEL_MODULE_AUTOLOAD += "xfs"

 MACHINE_EXTRA_RRECOMMENDS = " \
-       gst-plugin-dvbmediasink \
+       gstreamer1.0-plugin-dvbmediasink \
        ntfs-3g \
        "

 CHIPSET = "bcm7358"

 DVBMEDIASINK_CONFIG = "--with-wma --with-wmv --with-pcm --with-dts --with-eac3"
+GST_VERSION = "1.0"

 TARGET_ARCH = "mipsel"
 DEFAULTTUNE ?= "mips32el"

[MastaG]

So did it work?

How's it running on your xp1000?

[mx3L]

1. It looks like that ca-certificates is necessary after all, at least to supress this warning:

eServiceMP3::starting pipeline
main thread is non-idle! display spinner!

(enigma2:1249): GLib-Net-WARNING **: couldn't load TLS file database: Failed to open file '/etc/ssl/certs/ca-certificates.crt': No such file or directory
resolved to PLAY
gst_elemesupressnt_query_position failed in getPlayPosition

2. gstreamer1.0-plugins-bad-rtmp was not built, so rtmp streams were not working.

 

In attachment are patches which are fixing both issues.

 

1.patch - just added ca-certificates to RRECOMMENDS in enigma2.bb so it will be builded as it was before

2.patch - use PACKAGECONFIG variable to enable rtmp feature, this also means that we don't need to add dependency for librtmp, since it's already set for PACKAGECONFIG[rtmp] to rtmpdump in gstreamer1.0-plugins-bad.inc

Attached Files

•  0001-enigma2-added-ca-certificates-to-RRECOMMENDS.patch   802bytes   19 downloads
•  0002-gstreamer1.0-plugins-bad-fix-building-of-rtmp-plugin.patch   1.34KB   21 downloads

[theparasol]

So did it work?

How's it running on your xp1000?

 

Still building...

[metoo]

my first try for et7x00, with Lubuntu 14.10 64 bit, thanks to theparasol post #465.

Got these warnings yesterday evening,  errror missing gawk, then have installed gawk.

 

ERROR:  OE-core's config sanity checker detected a potential misconfiguration.

    Either fix the cause of this error or at your own risk disable the checker (see sanity.conf).

    Following is the list of potential problems / advisories:

 

    Please install the following missing utilities: gawk

 

WARNING: Failed to fetch URL ftp://ftp.gmplib.org/pub/gmp-6.0.0/gmp-6.0.0a.tar.bz2, attempting MIRRORS if available

WARNING: Failed to fetch URL http://zlib.net/pigz/pigz-2.3.1.tar.gz, attempting MIRRORS if available

WARNING: Failed to fetch URL ftp://ftp.debian.org/debian/pool/main/b/base-passwd/base-passwd_3.5.29.tar.gz, attempting MIRRORS if available

WARNING: Failed to fetch URL http://www.apache.or...il-1.5.3.tar.gz, attempting MIRRORS if available

WARNING: Missing md5 SRC_URI checksum for /home/gerlubuntu/openpli4/openpli-openpli-oe-core/sources/serf-1.3.8.tar.bz2, consider adding to the recipe:

SRC_URI[md5sum] = "2e4efe57ff28cb3202a112e90f0c2889"

WARNING: Failed to fetch URL http://downloads.sou...g-1.6.13.tar.xz, attempting MIRRORS if available

WARNING: QA Issue: libtuxtxt: Files/directories were installed but not shipped

  /usr/lib/libtuxtxt.so [installed-vs-shipped]

WARNING: QA Issue: giflib-utils requires /usr/bin/perl, but no providers in its RDEPENDS [file-rdeps]

WARNING: QA Issue: gst-plugins-good-matroska rdepends on libbz2, but it isn't a build dependency? [build-deps]

WARNING: QA Issue: gst-plugins-good-video4linux2 rdepends on libudev, but it isn't a build dependency? [build-deps]

WARNING: QA Issue: gst-plugins-good-video4linux2 rdepends on libgudev, but it isn't a build dependency? [build-deps]

WARNING: QA Issue: gst-plugins-bad-bz2 rdepends on libbz2, but it isn't a build dependency? [build-deps]

WARNING: QA Issue: gst-plugins-bad-cog rdepends on libpng, but it isn't a build dependency? [build-deps]

WARNING: QA Issue: gst-plugins-bad-dtsdec rdepends on libdca, but it isn't a build dependency? [build-deps]

WARNING: QA Issue: gst-plugins-bad-resindvd rdepends on libdvdread, but it isn't a build dependency? [build-deps]

WARNING: QA Issue: gst-plugins-bad-resindvd rdepends on libdvdnav, but it isn't a build dependency? [build-deps]

WARNING: QA Issue: gst-plugins-bad-sndfile rdepends on libsndfile1, but it isn't a build dependency? [build-deps]

WARNING: Failed to fetch URL http://jerakeen.org/...ap-0.7.1.tar.gz, attempting MIRRORS if available

WARNING: QA Issue: File '/usr/bin/ushare' from ushare was already stripped, this will prevent future debugging! [already-stripped]

WARNING: aio-grab: No generic license file exists for: GPL in any provider

WARNING: QA Issue: bluez4 rdepends on libudev, but it isn't a build dependency? [build-deps]WARNING: QA Issue: enigma2-plugin-systemplugins-wirelesslan rdepends on wireless-tools, but it isn't a build dependency? [build-deps]

WARNING: QA Issue: enigma2-plugin-systemplugins-wirelesslan rdepends on wpa-supplicant, but it isn't a build dependency? [build-deps]

WARNING: QA Issue: enigma2-plugin-extensions-dvdburn rdepends on cdrkit, but it isn't a build dependency? [build-deps]

WARNING: QA Issue: enigma2-plugin-extensions-dvdburn rdepends on dvd+rw-tools, but it isn't a build dependency? [build-deps]

WARNING: QA Issue: enigma2-plugin-extensions-dvdburn rdepends on mjpegtools, but it isn't a build dependency? [build-deps]

WARNING: QA Issue: enigma2-plugin-extensions-dvdburn rdepends on dvdauthor, but it isn't a build dependency? [build-deps]

WARNING: QA Issue: enigma2-plugin-extensions-dvdburn rdepends on replex, but it isn't a build dependency? [build-deps]

WARNING: QA Issue: enigma2-plugin-extensions-cutlisteditor rdepends on aio-grab, but it isn't a build dependency? [build-deps]

WARNING: QA Issue: nfs-utils requires /bin/bash, but no providers in its RDEPENDS [file-rdeps]

WARNING: QA Issue: samba: Files/directories were installed but not shipped

Edited by metoo, 27 January 2015 - 11:44.

[arn354]

You have not properly installed all needed utilities to build a image.

 

Please install the following missing utilities: gawk

 

 

Probably you miss some more utilities...

sudo apt-get install -y gawk

[betacentauri]

You can ignore the warnings. They are normal.

[theparasol]

I'm stuck

 

checking for pkg-config... /home/notroot/openpli4/openpli-openpli-oe-core/build/tmp/sysroots/i686-linux/usr/bin/pkg-config
checking pkg-config is at least version 0.9.0... yes
checking for ENIGMA2... yes
checking for GSTREAMER... no
configure: error: Package requirements (gstreamer-0.10 gstreamer-pbutils-0.10) were not met:

No package 'gstreamer-0.10' found
No package 'gstreamer-pbutils-0.10' found

Consider adjusting the PKG_CONFIG_PATH environment variable if you
installed software in a non-standard prefix.

Alternatively, you may set the environment variables GSTREAMER_CFLAGS
and GSTREAMER_LIBS to avoid the need to call pkg-config.
See the pkg-config man page for more details.
Configure failed. The contents of all config.log files follows to aid debugging
/home/notroot/openpli4/openpli-openpli-oe-core/build/tmp/work/xp1000-oe-linux/enigma2-plugins/experimental-gitAUTOINC+5693235384-r10/git/config.log
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.

 

Hope anyone knows what I'm obvious doing wrong....

[betacentauri]

Try this:

diff --git a/meta-openpli/recipes-openpli/enigma2-plugins/enigma2-plugins.bb b/meta-openpli/recipes-openpli/enig
index d02d5c5..0836794 100644
--- a/meta-openpli/recipes-openpli/enigma2-plugins/enigma2-plugins.bb
+++ b/meta-openpli/recipes-openpli/enigma2-plugins/enigma2-plugins.bb
@@ -31,6 +31,7 @@ EXTRA_OECONF = " \
        STAGING_INCDIR=${STAGING_INCDIR} \
        STAGING_LIBDIR=${STAGING_LIBDIR} \
        --without-debug \
+       --with-gstversion=1.0 \
        ${@base_contains("MACHINE_FEATURES", "tpm", "--with-tpm" , "", d)} \
 "
 

[metoo]

thanks

 

NOTE: Tasks Summary: Attempted 3848 tasks of which 3518 didn't need to be rerun and all succeeded.

Summary: There were 9 WARNING messages shown.

[theparasol]

Betacentauri: tnx!

 

but no dice:

 

checking for ENIGMA2... yes
checking for GSTREAMER... no
configure: error: Package requirements (gstreamer-0.10 gstreamer-pbutils-0.10) were not met:

No package 'gstreamer-0.10' found
No package 'gstreamer-pbutils-0.10' found

Consider adjusting the PKG_CONFIG_PATH environment variable if you
installed software in a non-standard prefix.

Alternatively, you may set the environment variables GSTREAMER_CFLAGS
and GSTREAMER_LIBS to avoid the need to call pkg-config.
See the pkg-config man page for more details.
Configure failed. The contents of all config.log files follows to aid debugging
/home/notroot/openpli4/openpli-openpli-oe-core/build/tmp/work/xp1000-oe-linux/enigma2-plugins/experimental-gitAUTOINC+5693235384-r10/git/config.log
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.

It was created by enigma2-plugins configure 4, which was
generated by GNU Autoconf 2.69.  Invocation command line was

  $ /home/notroot/openpli4/openpli-openpli-oe-core/build/tmp/work/xp1000-oe-linux/enigma2-plugins/experimental-gitAUTOINC+5693235384-r10/git/configure --build=i686-linux --host=mipsel-oe-linux --target=mipsel-oe-linux --prefix=/usr --exec_prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --libexecdir=/usr/lib/enigma2-plugins --datadir=/usr/share --sysconfdir=/etc --sharedstatedir=/com --localstatedir=/var --libdir=/usr/lib --includedir=/usr/include --oldincludedir=/usr/include --infodir=/usr/share/info --mandir=/usr/share/man --disable-silent-rules --disable-dependency-tracking --with-libtool-sysroot=/home/notroot/openpli4/openpli-openpli-oe-core/build/tmp/sysroots/xp1000 BUILD_SYS=i686-linux HOST_SYS=mipsel-oe-linux STAGING_INCDIR=/home/notroot/openpli4/openpli-openpli-oe-core/build/tmp/sysroots/xp1000/usr/include STAGING_LIBDIR=/home/notroot/openpli4/openpli-openpli-oe-core/build/tmp/sysroots/xp1000/usr/lib --without-debug --with-gstversion=1.0