Posted 5 September 2014 - 19:20
root@et8000:~# cat /proc/bus/nim_sockets
NIM Socket 0:
Type: DVB-T2
Name: Si216x
Has_Outputs: yes
Frontend_Device: 0
I2C_Device: 3
The greatest SNR Si216x(DVB-T2) of 55%.
At the same time USB DVB-T AVerMedia(A835) SNR 99%.
If SNR Si216x(DVB-T2) = 52%, AVerMedia(A835) SNR = 96%.
What could be the problem?
Edited by Dima73, 5 September 2014 - 19:21.
GigaBlue UHD Quad 4K /Lunix3-4K/Duo 4K
Posted 6 September 2014 - 07:40
ОК.
What is the maximum SNR on your DVB-C/T2 Hybrid Tuner?
Please reply 
.
GigaBlue UHD Quad 4K /Lunix3-4K/Duo 4K
Posted 10 September 2014 - 05:54
Posted 10 September 2014 - 09:44
I have the same tuner-mode T2, models 8000 and 10000, works fine, but the signal plays continuously from 0 to 90%, apparently a problem with the driver!In a C-mode no problems!
Thank you.
Receiver freezes when you turn from the deep standby.
The system is busy, there is no video, only audio.
You do not have these problems?
GigaBlue UHD Quad 4K /Lunix3-4K/Duo 4K
Posted 10 September 2014 - 11:17
Posted 10 September 2014 - 12:51
Hi dima73,
I have also this problem, but not every time.
Hi.
Well, I was not alone.
Now the problem is clear 
.
GigaBlue UHD Quad 4K /Lunix3-4K/Duo 4K
Posted 13 September 2014 - 03:56
Receiver freezes when you turn from the deep standby.
The system is busy, there is no video, only audio.
You do not have these problems?
Posted 13 September 2014 - 10:26
Checked:
ET8000-drivers-3.13.8-20140729
The bug has not been resolved 
.
GigaBlue UHD Quad 4K /Lunix3-4K/Duo 4K
Posted 13 September 2014 - 11:43
SNR will be fixed with driver update 20140729:
[et10000/et8000] Drivers update changelog: -Add DVB-C Blindscan support for DVB-C tuners -reduced power consumption for DVB-C tuners -fixed DVB-C snr value readout for hybrid DVB-T/T2/C tuner [et10000/et8000] Blindscan utilis added
Posted 13 September 2014 - 11:48
SNR will be fixed with driver update 20140729:
[et10000/et8000] Drivers update changelog: -Add DVB-C Blindscan support for DVB-C tuners -reduced power consumption for DVB-C tuners -fixed DVB-C snr value readout for hybrid DVB-T/T2/C tuner [et10000/et8000] Blindscan utilis added
The main problem of this:
http://openpli.org/f...ndpost&p=443427
GigaBlue UHD Quad 4K /Lunix3-4K/Duo 4K
Posted 13 September 2014 - 12:10
Sorry, you are right, issue for the SNR Readout/Calculation not fixed at all for DVB-T, maybe for DVB-C.
Edited by daddelfalk, 13 September 2014 - 12:11.
Posted 14 September 2014 - 11:30
Updated.
* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.
Posted 14 September 2014 - 11:52
Updated.
Thanks, but ...
New drivers bug is not corrected.
Working drivers for 8000 in the archive.
Who could be useful 
.
GigaBlue UHD Quad 4K /Lunix3-4K/Duo 4K
Posted 14 September 2014 - 15:51
Individuals can download and install these. We are dependent on what xtrend update in their bsp layer.
* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.
Posted 15 September 2014 - 18:42
No builds last night from 8000/10000, others build well, maybe this commit?
Edited by metoo, 15 September 2014 - 18:42.
ET10000 C C C C/T 2TB HDD ET7000 + ET6000 dvb-S OpenPli Triax 88 multifeed quad LNBs VU Uno4K SE C+2TB HDD Mutant HD60
Posted 6 November 2014 - 10:42
Drivers-3.14.16 linux kernel update et8000/et10000: -fix DVB-C snr value -fix DVB-C tuner init after reboot -fix DVB-T(2) bandwidth parameter (Si2168) -fix DVB-T snr calculation crash (TDA18273) -various optimizations (size / boot speed)
Receiver freezes when you turn from the deep standby. The system is busy, there is no video, only audio.
The problem is not solved.
New receiver and I can not use it.
GigaBlue UHD Quad 4K /Lunix3-4K/Duo 4K
Posted 6 November 2014 - 18:38
I don't have an et8000, but others seem to have little problems with them. What is exactly your configuration and what is the exact problem?
* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.
Posted 6 November 2014 - 19:25
I don't have an et8000, but others seem to have little problems with them. What is exactly your configuration and what is the exact problem?
This is a very big problem.
The receiver does not work after wakeup from deep standby mode.
http://www.xtrend-ho...90021e5ca26dbef
GigaBlue UHD Quad 4K /Lunix3-4K/Duo 4K
Posted 6 November 2014 - 19:39
Et8000 lijkt kaarten (van ziggo) niet meer te lezen.Started by kostenzer, 4 Aug 2019  et8000, ziggo, kaartlezer
|
|
|
||
Et8000 en et10000 vinden verschillende zenders.Started by kostenzer, 21 Jul 2019 et8000, et10000, zenders
|
|
|
||
Opnames kopieren van ET8000 naar et10000 allen via omwegStarted by kostenzer, 20 Jul 2019 kopieren, et8000, et10000
|
|
|
||
Geen beeld meer van Openpli 4 naar 7.1 ET8000Started by kostenzer, 19 Jul 2019 geen beeld, openPli 7.1, Sid, PAT and 1 more...
|
|
|
||
Et8000 doet raar uit en aanzetten is dan nodig.Started by kostenzer, 2 Mar 2018 et8000, kapot? and 1 more...
|
|
|
0 members, 1 guests, 0 anonymous users
