Hi Pr2,
yes, i will do it tomorrow.
i give then feedback as it is alright or not.
thanks for commit
regards
Pike
Posted 19 July 2019 - 09:27
Hi,
Thanks for the translation marked as fuzzy/to be revised if they are correct you need to change the switch (in PoEdit) to mention that they are valid. If they are not you need to fix them. :-)
The "fuzzy" strings are never displayed in the GUI.
Regards,
Pr2
Edited by Pr2, 19 July 2019 - 09:28.
NO SUPPORT by PM, it is a forum make your question public so everybody can benefit from the question/answer.
If you think that my answer helps you, you can press the up arrow in bottom right of the answer.
Wanna help with OpenPLi Translation? Please read our Wiki Information for translators
Sat: Hotbird 13.0E, Astra 19.2E, Eutelsat5A 5.0W
VU+ Solo 4K: 2*DVB-S2 + 2*DVB-C/T/T2 (used in DVB-C) & Duo 4K: 2*DVB-S2X + DVB-C (FBC)
AB-Com: PULSe 4K 1*DVB-S2X (+ DVB-C/T/T2)
Edision OS Mio 4K: 1*DVB-S2X + 1*DVB-C/T/T2
Posted 19 July 2019 - 11:20
Edited by Pr2, 19 July 2019 - 11:21.
NO SUPPORT by PM, it is a forum make your question public so everybody can benefit from the question/answer.
If you think that my answer helps you, you can press the up arrow in bottom right of the answer.
Wanna help with OpenPLi Translation? Please read our Wiki Information for translators
Sat: Hotbird 13.0E, Astra 19.2E, Eutelsat5A 5.0W
VU+ Solo 4K: 2*DVB-S2 + 2*DVB-C/T/T2 (used in DVB-C) & Duo 4K: 2*DVB-S2X + DVB-C (FBC)
AB-Com: PULSe 4K 1*DVB-S2X (+ DVB-C/T/T2)
Edision OS Mio 4K: 1*DVB-S2X + 1*DVB-C/T/T2
Posted 19 July 2019 - 19:19
Your PR has been reverted because it doesn't respect our standard.
Please check the wiki page link in my signature to properly configure your PoEdit.
NO SUPPORT by PM, it is a forum make your question public so everybody can benefit from the question/answer.
If you think that my answer helps you, you can press the up arrow in bottom right of the answer.
Wanna help with OpenPLi Translation? Please read our Wiki Information for translators
Sat: Hotbird 13.0E, Astra 19.2E, Eutelsat5A 5.0W
VU+ Solo 4K: 2*DVB-S2 + 2*DVB-C/T/T2 (used in DVB-C) & Duo 4K: 2*DVB-S2X + DVB-C (FBC)
AB-Com: PULSe 4K 1*DVB-S2X (+ DVB-C/T/T2)
Edision OS Mio 4K: 1*DVB-S2X + 1*DVB-C/T/T2
Posted 19 July 2019 - 20:03
i don't know what @littlesat has committed, but sure not my de translations from here;
https://forums.openp...dpost&p=1082537
i will correct it in the new de.po from here;
https://raw.githubus...evelop/po/de.po
and then later i post it, it's much work and now also double work for me.
regards
Pike
Edited by Pike_Bishop, 19 July 2019 - 20:03.
Receiver: VU Ultimo 4K, Octagon SF8008 4K, Gigablue Quad 4K
Image: OpenPLI-8.3
Posted 19 July 2019 - 20:55
i don't know what @littlesat has committed, but sure not my de translations from here;
https://forums.openp...dpost&p=1082537
i will correct it in the new de.po from here;
https://raw.githubus...evelop/po/de.po
and then later i post it, it's much work and now also double work for me.
regards
Pike
Hi Pike,
Somebody else create a PR towards our git that creates confusion on the de.po file.
So please wait for this PR to be committed:
https://github.com/O...igma2/pull/2201
It is your translation.
Regards,
Pr2
NO SUPPORT by PM, it is a forum make your question public so everybody can benefit from the question/answer.
If you think that my answer helps you, you can press the up arrow in bottom right of the answer.
Wanna help with OpenPLi Translation? Please read our Wiki Information for translators
Sat: Hotbird 13.0E, Astra 19.2E, Eutelsat5A 5.0W
VU+ Solo 4K: 2*DVB-S2 + 2*DVB-C/T/T2 (used in DVB-C) & Duo 4K: 2*DVB-S2X + DVB-C (FBC)
AB-Com: PULSe 4K 1*DVB-S2X (+ DVB-C/T/T2)
Edision OS Mio 4K: 1*DVB-S2X + 1*DVB-C/T/T2
Posted 19 July 2019 - 21:06
So please wait for this PR to be committed:
https://github.com/O...igma2/pull/2201
It is your translation.
PR merged.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 19 July 2019 - 21:06
i don't know what @littlesat has committed, but sure not my de translations from here;
https://forums.openp...dpost&p=1082537
i will correct it in the new de.po from here;
https://raw.githubus...evelop/po/de.po
and then later i post it, it's much work and now also double work for me.
regards
Pike
Hi,
Here is your translation:
https://raw.githubus...evelop/po/de.po
Regards,
Pr2
NO SUPPORT by PM, it is a forum make your question public so everybody can benefit from the question/answer.
If you think that my answer helps you, you can press the up arrow in bottom right of the answer.
Wanna help with OpenPLi Translation? Please read our Wiki Information for translators
Sat: Hotbird 13.0E, Astra 19.2E, Eutelsat5A 5.0W
VU+ Solo 4K: 2*DVB-S2 + 2*DVB-C/T/T2 (used in DVB-C) & Duo 4K: 2*DVB-S2X + DVB-C (FBC)
AB-Com: PULSe 4K 1*DVB-S2X (+ DVB-C/T/T2)
Edision OS Mio 4K: 1*DVB-S2X + 1*DVB-C/T/T2
Posted 19 July 2019 - 21:08
Der jemand war ich und ich hab es weitergeleitet.
Wurde aber revertet und ich weiß nicht genau wieso?
aber ihr macht das schon.
Grüße
This is an english forum, so please use english and the reason why it has been reverted was because you didn't follow the recommended setup in your PoEdit (as already explained above).
Click on the link in my signature and configure properly your PoEdit.
NO SUPPORT by PM, it is a forum make your question public so everybody can benefit from the question/answer.
If you think that my answer helps you, you can press the up arrow in bottom right of the answer.
Wanna help with OpenPLi Translation? Please read our Wiki Information for translators
Sat: Hotbird 13.0E, Astra 19.2E, Eutelsat5A 5.0W
VU+ Solo 4K: 2*DVB-S2 + 2*DVB-C/T/T2 (used in DVB-C) & Duo 4K: 2*DVB-S2X + DVB-C (FBC)
AB-Com: PULSe 4K 1*DVB-S2X (+ DVB-C/T/T2)
Edision OS Mio 4K: 1*DVB-S2X + 1*DVB-C/T/T2
Posted 19 July 2019 - 21:40
hi rantanplan,
in poedit go to;
file -> settings -> extended
or in germany to;
Datei -> Einstellungen -> Erweitert
and the look at my picture;
Poedit_config.jpg 132.83KB 1 downloads
regards
Pike
Receiver: VU Ultimo 4K, Octagon SF8008 4K, Gigablue Quad 4K
Image: OpenPLI-8.3
Posted 19 July 2019 - 21:48
And you also need to untick the Umbrechen bei:
NO SUPPORT by PM, it is a forum make your question public so everybody can benefit from the question/answer.
If you think that my answer helps you, you can press the up arrow in bottom right of the answer.
Wanna help with OpenPLi Translation? Please read our Wiki Information for translators
Sat: Hotbird 13.0E, Astra 19.2E, Eutelsat5A 5.0W
VU+ Solo 4K: 2*DVB-S2 + 2*DVB-C/T/T2 (used in DVB-C) & Duo 4K: 2*DVB-S2X + DVB-C (FBC)
AB-Com: PULSe 4K 1*DVB-S2X (+ DVB-C/T/T2)
Edision OS Mio 4K: 1*DVB-S2X + 1*DVB-C/T/T2
Posted 19 July 2019 - 22:46
Hi Pr2,
And you also need to untick the Umbrechen bei:
ok, thanks - good to know - i will do it.
i have checked now the de.po from here;
https://raw.githubus...evelop/po/de.po
and now all is ok (all my de translations yet are in there) - you have also a pm.
regards
Pike
Receiver: VU Ultimo 4K, Octagon SF8008 4K, Gigablue Quad 4K
Image: OpenPLI-8.3
Posted 24 July 2019 - 21:30
Hi,
more corrected (better) de.translations for 7.1-release with todays de.po from here;
https://github.com/O...evelop/po/de.po
de.po_new_corrected_translations.zip 78.43KB 1 downloads
regards
Pike
Edited by Pike_Bishop, 24 July 2019 - 21:30.
Receiver: VU Ultimo 4K, Octagon SF8008 4K, Gigablue Quad 4K
Image: OpenPLI-8.3
Posted 24 July 2019 - 21:47
Hi,
Be careful that we have multi branches, the current 2 main ones are "develop" and "release-7.1"
The link you provide in your post refer to the branch develop (as you can see in its name) so if you have reworked based on this de.po than your translation is for the "develop" branch.
https://github.com/O...evelop/po/de.po
But this link refer to branch 7.1:
https://github.com/O...se-7.1/po/de.po
And both files are slightly different because some strings have already changed between release-7.1 and develop branch.
But I will pick up your develop branch de.po file and put it on the release-7.1 branch and generate it again so you will have less work to perform. Only the few changed strings will need to be reviewed.
Pr2
NO SUPPORT by PM, it is a forum make your question public so everybody can benefit from the question/answer.
If you think that my answer helps you, you can press the up arrow in bottom right of the answer.
Wanna help with OpenPLi Translation? Please read our Wiki Information for translators
Sat: Hotbird 13.0E, Astra 19.2E, Eutelsat5A 5.0W
VU+ Solo 4K: 2*DVB-S2 + 2*DVB-C/T/T2 (used in DVB-C) & Duo 4K: 2*DVB-S2X + DVB-C (FBC)
AB-Com: PULSe 4K 1*DVB-S2X (+ DVB-C/T/T2)
Edision OS Mio 4K: 1*DVB-S2X + 1*DVB-C/T/T2
0 members, 9 guests, 0 anonymous users